Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #71579 next resume »»
CONTACT INFORMATION:
View contact information...

Licenses or Certificates
PLS Washington
State Certified Journeyman-Technical Engineer (WA)

Capabilities
Field: Heavy construction surveys and building layout, field engineering (high rises, oil refineries, freeways, bridges, tunnels, schools, court houses, zoo exhibits, office buildings, computer chip plants, casinos, post offices, cellular towers, electrical transmission lines, wind generator farms, and highways). ALTA's, topography, as-builts, boundary, quarter-section retracement, subdivisions, lot line adjustments, partition plats, monument replacement, utilities, parking lots, marinas, slope staking, and grade hop.

Instruments: Lietz Set 4, Lietz SDM3E, Kern E1T, Geodimeter, Zeiss Elta 3, Topcon GTS2, Topcon ATF2, Topcon 301, Wild T1, T2, T16, T-1000, DI4, Beetle, K & E Transit, dumpy level, Wild NO-1, Lietz auto level, Wild split-bubble level, Ashtech Z-12(GPS), Radius(GPS) Trimble GPS(RTK), Leica 1200 & 500 GPS(RTK) and Pacific laser. Also have ability to keep instruments in adjustment. Peg levels and adjust horizontal and vertical collimation.

Office: Coordinate office and field work, purchase supplies, develop bids, consult with clients and/or subs, calculations, research prints for conformity, note reduction, write and decipher legal descriptions, title research, expert witness in boundary dispute court cases, boundary resolution, develop easements, design septic drainfields, design subdivisions, CAD draft, take lift drawings, county records research, cost reports, scheduling, planning, project management, office management, proposal writing, and troubleshoot design problems.

Computers and Programs: HP-200, IBM clone, IBM PCXT, HP plotter, laser and pin printers, HP41CX, HP48SX, SDR-22 and SDR-33 data collector, TDS-48 data collector, Lotus 1-2-3, WordPerfect, Pacsoft Topo-Cogo 200, Autocad 9-10-11-12-13-14, DCA, Softdesk 7 & 8, Maptech, Mapcadd, Landcadd, Archcadd, AutoCAD-LT, LDD3 2000, 2004, 2006, Civil Projects 2008, Vertcon, Corpscon, TIN, PC Write, Generic Cadd 6.0, Vices USGS, XTPRO, Visiosoft, Quattro, Excell, and several of my own programs for the HP41CX.

Employment History
2008: Staff Surveyor
Electrical Consultants, Inc
Woods Cross, UT

2007: Survey Department Manager, Project Surveyor, Market Survey Services, CADD Manager, CADD Drafter
Alcantar & Associates
Portland, OR

2006-2007: Survey Department Manager, Project Surveyor, CADD Drafter
Minister-Glaeser Surveying Inc.
Pasco, WA

2006-Current: Contract surveying and drafting. Professional Consulting. Miscellaneous work throughout Oregon & Washington
Tom Nelson & Associates JBAK Consultants
Portland, OR Vancouver, WA

2005-2006: Survey Department Manager, Project Surveyor, Market Survey Services, CADD Manager, CADD Drafter
Northwest Datum & Design, Inc
Burlington, WA

2004-2005: Survey Manager, Project Surveyor, Market Survey Services, CADD Manager, CADD Drafter
CSA
Portland, OR

1997-2003: Owner, Survey Manager, Project Surveyor, Market Survey Services, CADD Manager, CADD Drafter
Olympic Surveyors
St. Helens, OR

1997: Survey Manager, Project Surveyor, Market Survey Services, CADD Manager,
CADD Drafter
Logikos Science, Inc.
Portland, OR

1996: Survey Manager, Project Surveyor, Market Survey Services, CADD Drafter
Northwest Civil Consultants, Inc.
Portland, OR

1994-96: Survey Manager, Project Surveyor, Marketing Survey Services, CADD Drafter, Engineering Tech
ASCG Incorporated
Portland, OR

1993-94: Party Chief, AutoCAD Specialist, Field Coordinator, Septic Designer
Datum Pacific
Coupeville, WA

1992-93: Field Engineer/Surveyor
Ellis-Don Construction
Bellevue, WA

1991-92: Heavy Construction Layout Carpenter/Surveyor
SAE/Continental Heller construction
Tacoma, WA

1991: Survey Manager/Party Chief
R.A. Edwards Inc.
Seattle, WA

1990-91: Chief of parties/Party Chief
OTAK
Kirkland, WA

1989-90: Party Chief
Tritech Associates
Tacoma, WA

1988-89: Assistant Party Chief
City of Seattle, Parks Department
Seattle, WA

1986-88: Surveyor's Assistant
City of Seattle, Parks Department
Seattle, WA

1983-86: Technical Engineer/Instrumentman-Chainman
IUOE 302 - Guy F. Atkinson Construction, Howard S. Wright Construction, Tri-State Construction, Bechtel, Scoccolo Construction
Puget Sound area, WA

1977-81: Engineering Technician III/Chainman
City of Aberdeen
Aberdeen, WA

1976-82: Student
Grays Harbor Community College
Aberdeen, WA
Washington State University
Pullman, WA

1973-76: Deck Seaman/Electronic Warfare Tech/Radar Operator
U.S. Navy

View contact information...
«« previous resume next resume »»
Search Results (Resumes 4551 to 4600 of 6411)Go to Search Parameters...
Brief Description
Techenical /Project Engineer
Work over supervisor, fishing specialist, slick line coordinator, well testing coordinator, wells technician
Instrumentation Engineer. Project from SIEMENS. Have worked with PLC in SIEMENS. Also currently in Oman working in Gulf Petrochemical Services
I have three years experience maintenance field experience and one year sap pm module
I have experience in electrical maintenance over 7 years
B.Tech chemical Engineer with basic computer skill
To work in an IT industry with the state- of- the art machines with utmost aims of achieving result and proactive in competing with the challenges in oil and gas sector.
Assistant Engineer in PT. Petroindo Gunapersada Engineering Preventive Maintanance Valve with OLVLS
Supervision of pipeline lay Supervision of Welding of Pipeline Maintenance of heavy-duty machines for construction
Instrumentation and control engineer in the area of Design and Automations.
Corrosion Specialist, API-510 certified, Nace CP and Coatings, Chemical Inhibition
Comprehensive leadership abilities, excellent verbal and written communication skills, Ability to deal with people diplomatically.
Post grdaution - MBA (Finance), Graduation - BE ( Mechanical Engineering) with Power and Steam Generation Projects, Operations and Maintenance Experience
Experianced Well Services Supervisor. Working in the North sea on various contracts. Supervising all Well Interventions performed on Installation, Semi or Jack up. Liasing with Installation to ensue smooth running of operation in a timely and safe manner.
B.tech Mechanical
Ability to work with minimal supervision, Ability to work in a multi disciplinary team, Good communication skills, Ability to carry out sample Descriptions and Analysis,
11 Years of Experience in implementation of the General Safety of Employees, equipments & Work Permit System, Accident Investigation & analysis, Identification of actual & potential Safety Hazards in respect of Health, Safety & Environment, Carrying out project safety inspection, Job Safety Analysis
Highly qualified geotechnical engineer with sound engineering knowledge and judgement to serve the industry efficiently.
Project management,QA/QC,Construction,Maintenance
23 years in safety field in Petroleum Refineries, Petrochemical Plants, Pipeline Projects, Well Services, Wireline Operations, and Wastewater Treatment. 8 years with Safety Instructor tasks, 7 years in Construction Projects, 5 years with Q/A Q/C tasks, and 7 years in Managerial level
Civil Engineer- Labd development planning and Civil design, CAD drafting, computer skills
Graduate/Mechanical Engineer-Working in Project Engg., & Management for Oil, Gas & Petrochemical
Civil/Structural/Mining Engineer (taking Structural Masters) with 6 years experience in a civil and mining environment as well as technical sales experience. Completed BSc in Mining Engineering and ongoing schooling in Masters in Mechanical Engineering (MCE). Willing to relocate.
Fully qualified Diesel Mechanic. NVQ Level 3 in Heavy & Light Commercial Vehicles. HGV C+E Licence. ADR Licence. 13 years experience with Mercedes Benz. Numerous Mercedes Benz Certificates held.
Project Manager Deepwater, Regulatory Compliance
Senior electrical engineer with experience in oil and gas , power generation and industrial projects
Licensed surveyor in washington with 30 years experience
Proven managerial skills combined with assertive personality sensitive to multi-cultural & multi-national environments.
Experience on board American FPSO, experience on board two VLCC steam tankers, Familiar to work with multinational crew, My rank in class is the second highest position, Bachelor degree of marine engineering
Coordination of projects
QA/QC Engineer
Condition monitoring
Mechanical Engineer, EIT
I am a Mechanical Engineer who passed out from University of Moratuwa, Sri Lanka. I obtained Second Class Upper division pass for my degree. Currently I am working as a Design Engineer (Pressure Vessels) in a Malaysian steam boiler manufacturing company.
Maximo,Brio Reports,Oracle,SQL Server,Vb.Net
I am expecting the job from oil and gas field in Russia/CIS
Piping engineer
resume for employment
I am an Instrumentation Technician for the last 7 years both training and working in Ireland and seeking work aboard that would suit my skills and training.
Project Management - Oil & Gas; Plant Equipment Maintenance.
Quality Assurance, Quality Control, Inspector, Sr. Inspector, Sr. Surveyor, QA/QC Inspection Engineer– Supply / Construction, Quality Coordinator / Administrator, Procurement Quality Inspection Services Manager / Coordinator, Expeditor, Lead Mechanical Engineer.
Third officer.
Maintenance in PLC,DRIVES,Instrumentation Field
PETROLEUM (PRODUCTION ) ENGINEER
Planning/Scheduling Engineer - Specilization in Primavera P3- Having 10years of experience in Oil, Gas, Refinery, Power & ME sectors worked under different Prestigious organisations like PDO, BP, QP, ADNOC, Bechtel, Snamprogetti, Sumitomo Corporation, HHI, etc - 6Yrs. in Planning & 4Yrs in Site(E&I)
I have wide experience in field of inspection for petroleum oil and gas project. With multi national companies using international standards and specification. I worked in middle east, Far East and Kazakstan. You can contect to any of company which I worked and confirm with them.
With more than 17th years of experience in performing design engineering and constructions on various facilities relating to Chemical Plant, Petrochemical Plant, Oil and Gas, Refineries, Commercial and Industrial Projects. Applies standard design principles and theories to complete assignments. Util
Mud logging, drilling planning, drilling operations, production operations, mud engineering, drilling and production monitoring.
Stanford MBA, BSc, (Mechanical Engineering); Seasoned Oil & Gas professional with 14-years international leadership experience in engineering, project management, procurement and contracting, and commercial activities
8-year mechanical design engineering professional
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   [ 92 ]   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com