Resume - Entry level Engineer with a Masters in Petroleum engineering and a Bachelors of ...

Misco Jobs

Resume #71583

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Seeking a challenging full time engineering position where I can apply my knowledge of chemical/ petroleum engineering fundamentals, and gain invaluable experience about the oil and gas industry.

EDUCATION
University of Houston - Houston Texas
* Masters of Petroleum Engineering/ Fall 2006
* Cumulative GPA: 3.62/4.00
Graduation date: May 2008

University of Houston - Houston Texas
* Bachelor of Science / Chemical Engineering (Cum Laude)/Spring 2002
* Minor /Chemistry
* Cumulative GPA: 3.43/4.00 Major GPA:3.03/4.00
* Graduation Date: May 2006
Applicable course work: Reservoir Engineering 2, Enhanced Oil Recovery, Applied Reservoir Simulation, Reservoir Engineering 1, Petroleum Fluids Properties and Phase Equilibria, Petroleum Production Systems, Hydraulic fracturing, Pressure transient testing, Well drilling and Completion, Evaluation of Petroleum Bearing Formation, Reaction Engineering, Chemical Plant Design.

SKILLS
* CMG reservoir simulator, Saphir, PVT-SIM, UTCHEM, MI-PVT, Chem-cad, Math Lab, Fortran, Microsoft word, Microsoft excel, Microsoft power-point

WORK EXPERIENCE
M.I Swaco-Research Development and Engineering CO-OP February 2008 -Present
Houston, Texas
* Evaluating solid control process efficiency on drilled wells
* Developing solutions and making recommendation for solid control process and equipment efficiency
* Laboratory preparation of slurry and the determination of slurry properties like Funnel viscosity, Density, Plastic viscosity, Yield point, Gel strength.
* Conduct lab tests to verify apparent viscosity analytical solution based on Funnel Viscometer time measurements to help simplify the drilling fluid/injection slurry viscosity/density measurements at well site, and to provide a reliable and cost effective drilling fluid/injection slurry viscosity/density data collection method.

Shell International Exploration and Production- Rock and Fluids Property Lab January 2007 – December 2007
Bellaire, TX
* Performing core analysis on core samples
* Determination of initial oil saturation, initial water saturation and initial gas saturation in core samples
* In charge of cleaning rock core sample prior to and after experiments
* Maintained rock core sample inventory prior to and after experiments
* Performed Boyles law experiment to determine the porosity of rock core samples
* Performed Dean Stark experiment to determine the water saturation of rock core samples
* In charge of monthly satellite waste accumulation report and regular solid and liquid generated waste reports

CLASS PROJECTS
* Designed a PKN fracture model program in excel that accounted for leak-off.
* Designed a chemical plant for a senior design class that produced formamide from carbon monoxide and ammonia, utilizing various principles of chemical engineering. Design was carried out to meet specific requirements.
* Designed an irrigation system for an 18-hole golf course given certain specification in regards to the pressure, velocity, volumetric flow rate, by the application of various fluids mechanics principles, including the Bernoulli's equation, continuity equation and the Energy equation.

HONORS AND AWARDS
* University of Houston Cullen College of Engineering Dean's List: Spring 2002, 2003, 2004, 2006
* National Dean's List: 2002-2003, 2005-2006
* Omega Chi Epsilon (Chemical Engineering National Honor Society)
* Tau Beta Pi (National Engineering Honor Society)
* Golden Key National Honour Society
* The National Scholars Honor Society

PROFESSIONAL MEMBERSHIP
1Member, Society of Petroleum Engineers (SPE)
2Treasurer, Omega Chi Epsilon 2004 -2005
3Facilities Chair, National Society of Black Engineers (NSBE) 2003 – 2004
4Member, American Institute of Chemical Engineers (AICHE)
5Member, Program for Mastery in Engineering Studies (PROMES)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2501 to 2550 of 6411)

Go to Search Parameters...

Brief Description

Graduated from Federal university of technology, Owerri Nigeria with a Second class lower honors and currently pursuing a Master's degree in chemical engineering at the University of Lagos and a certification in Microsoft Systems Engineering/Admin at NIIT Nigeria

Used simulation packages as HYSYS, UNISIM, DYNSIM, Shadow Plant. - B.Tech Chemical Engineer

Dowell schlumberger as Equipment Operator

Civil and Syructural engineer

Petroleum Engineer with 11 years working in Subsurface Services with solid knowledge and field experience in Water Control Technologies, Squeeze Cement with Coiled Tubing, Coiled Tubing, Snubbing , Wire Line, Logging, Well Abandons and Stimulation Jobs. Bilingual Level English - Spanish.

Chemistry, Physics and Calculus Educator/trainer. Native Spanish speaker.

Oil & Gas operation technician (Gauger) in OM&S (Oil Moments and Storage).

Challenging position in the Engineering field, in an organization, where I can Contribute my strong analytical and troubleshooting skills and experience in Machinist, Designing and CNC Programming along with the outstanding Interpersonal skills and grow professionally.

CHEMICAL ENGINEER with twelve years experience in production/process/project engineering. Looking for Project Management/Senior Project Engineering position either in the USA or Overseas [Preferably Africa].

IT specialist with 9 years of experience in Computer System Analysis, System Support, System Administration, Networking, Database development and Management. Excellent Knowledge of Relational DBMS's (RDBMS), Client server development, Computer hardware, Software and peripheral devices.

Basin modelling, organic petrography, sequence stratigraphy, x-ray diffraction, 2D seismic

Looking to contribute to the success of a company with my experience, hardwork and dedication to work as a team and make a difference preferably working on Petroleum, Gas or Cargo ships or Oil Rigs

I can work in supply boats, service ship and bunker ship

Around 12 years in the field of Instrumentation and Control System in Olefins Gas Cracker, Petrochemical and Copper Smelter & Refinery Sectors.

"Seeking Professional and Challenging career in Oil/ Gas/ Refinery/ Petrochemical sector. Offer extensive Field experiences in Maintenance/ Shutdown/ Commissioning/ and Construction of Plant and Rotary / Static Equipment”

Entry level Engineer with a Masters in Petroleum engineering and a Bachelors of science degree (cum laude) in Chemical engineering

I am an electronic ingeneer

Instrumentation maintenance

PLC, DCS ABB 800xA, Field Instrumentation

The posting also mentioned candidates with experience testing and reworking oil and gas wells. About 50% of my time over the past three years has been dedicated to this specific kind of work. I want to work hard and being a respectful engineer in the world.

Worked as a LAB TECHNICIAN for 4 years in oil & gas ind.

Ananlysis and design of steel structures, shelters and racks using STAAD. Design of soil supported and pile supported foundations using Foundation 3D, Mat 3D and MS-Excel

-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /

Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill

Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.

HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field

Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.

Senior Drilling Engineer & Supervisor

11 + years in oil & gas sector, process & operation expert. Master of technology in chem engg

I have over 16 years of oil and gas experience in both design engineering and EPC projects in Nigeria and India. I am presently working at L&T, E&C Division, Upstream Engineering, New Delhi as a Project Manager.

1st class Mechanical Engineering diploma in the year 1986. Coordinating of Site Project Management staff for the construction of the Oil & Gas Project.

Over 14 years of experience in the field of Welding Technology as Welding Manager / Welding Engineer in quality control activities of fabricated products such as Boiler & Pressure Vessels, Heat Exchangers, Columns, Storage tanks/spheres, Piping spools and Heavy structural steel items for petroch

Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.

Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.

WSS,WSE,WSI, experience on remote,land, desert, harsh environments. Experienced in exploration, oil,gas, appraisal, horizontal well drilling, Experience on all mud types,fishing, sidetracks, well control. Managed many multinational operations. Mentoring junior engineers. Strong QHSE commitment.

Oil/Gas Rotating Equipment / Marine Engineer

Total Experience 14 Years – [Gulf 10 Years & India 4 Years]

November 1998 - Present at Reliance Industries Limited [Refinery Complex]

Ten(10) years of experience in analysis, design and detail engineering of offshore structures and onshore structures associated with Oil & Gas Sector, Petro-Chemical and Petroleum Industry.

Reservoir engineer (BSc Petroleum Engineering ) with 4+ years of experience in the field of designing of reservoirs exploitation. Also, strong background and skills concerning petroleum engineering. He is looking for a worldwide employment opportunity.

Reservoir development, geologic modeling Landmark

Experienced about fourteen years in Refineries,Gas,Petrochemical and industrial units including teaching.

UNIX / LINUX / AIX Systems Administrator

A position with strong emphasis on Industrial Automation & Control with direct exposure to System Design, Configuration and Implementation. Support responsibilities utilizing strengths in the areas of project management and system architecture.

5.50 yrs Experience in Oil/Gas & Power industries on Rotating Equipments

Instrumentation engineer with three year exp in automation field like PLC,DCS,SCADA

Instrumentation engineer with 3 years experience in commissioning and maintenance field

Instrument & Control Engineer

Instrumentation Engineer with good knowledge of INtools & SmartPlant Tools

Junior Drilling Engineer, Completion, optimizing mud...

First Prev [ 51 ] 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out