Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #71630 next resume »»
CONTACT INFORMATION:
View contact information...

Work Experience -15 Years well established organization for inspection activities, Project co-ordination Inspection, QA/QC / Welding / Mechanical /Piping /Painting & Pipe lay Barge Deep sea Sub-Marine Pipeline project.

Experience Summary
„« Total 15 year's of experience in various positions in project co- ordination, Client QC Representative for Pipe lay Barge. welding inspection and plant inspection activities. Project activity for Topside piping, piping modification, Existing modification support & Doppler plate, and hook-up oil and water flow line. Riser neoprene repair &pipeline project. Experience in Plant/QC&welding inspection activities in offshore piping, Structural, Boiler pressure vessel manufacturing, plant construction and piping fabrication.
„« Integrity survey General visual inspection (GVI) of structure (primary, secondary and tertiary) vessel saddles, flare package unit enclosures, cabinets, instruments, electrical / instrumentation cable tray¡¦s/tubing, Risers, Vessels, Pipe works, x-mas trees, Helideck mapecrane, grating, Topside piping conductor, Hand rails and non metallic items.
„« Inspection of Painting, coating & insulation and submission of documentation.

„« Pipe lay Barge QC activities and co-ordination During sub marine Pipeline project

„« Carrying out Painting Inspection as per site specification, Procedure, manufacturer data& ITP. In Process Monitoring (surface Preparation &Paint application, mixing).Review material test report abrasives, paints etc. Monitoring all activities during Painting Heat Shrink sleeves application monitoring&peeltest conducted. Holiday detectors &rectification Of FBE coating.

„« All Kind of plant inspection jobs involved in separation platform, gas treatment plant, power generation plant, and water injection plant.

„« Inspection & Project co-ordination involved in OFFSHORE for more than 06 year¡¦s.

„« Working as a Client QC Representative to monitor the all the activities and co-ordination for Sub-marine Pipeline in Qatar OFFSHORE for Qatar Petroleum (QP).

„« Acting as a Inspection Engineer for Plant, wellhead /separation platform during absence of Inspection Engineer.

„« Familiar in RBI inspection activities.

„« Integrity System review for oil, gas, water, and drain system in separation platform.

„« Inspection activities in Pre& Final hook up and Riser repair for wellhead& separation platform (oil and water).

„« Integrity survey of corroded flanges and bolt/nut survey.

„« In charge all qc activities for fabrication shop piping and structural.

„« Hydro testing in-charge for pipeline.

„« Mechanical -qc activities for pigging (internal cleaning) & gauging plate for the pipeline.

„« Mechanical -qc activities for lay-up after the hydro test of pipeline.

„« Project co-ordination in various offshore project like topside piping for support and piping modification and repair work( patch plate )

„« Planning and organizing welding inspection activities.

„« Worked as a co-ordinator /incharge for welding inspection activities at different job's with group of welding/ QC inspector.

„« Familiar with all international codes and standard's with respect to welding inspect and QA/QC Activity for Boiler pressure vessel manufacturing. Pipeline construction

„« Preparation of WPS & PQR as per requirement

„« NDT inspection on pipelines, pressure vessel& structural Inspection of incoming material

„« Condition monitoring of fixed equipment performing internal and external inspection piping, Vessels and Tanks at offshore/onshore oil installations painting/coating to prolong equipment/tanks life.

„« All common welding processes like SMAW, GTAW, SAW, & GMAW. Inspection of surface preparation and coating inspection on pressure vessels, piping, storage tanks and structures.

„« Inspection of surface preparation and coating inspection on pressure vessels, piping, storage tanks and structures. Verification of all inspection reports

„« Witness the testing of MOV,GOV, various types of valves and maintain the certification record.
„« Welding inspection - radiographic interpretation.
„« Hydro test Witness the piping, exchanger, and all related plant equipment.

„« Standard used ASME B31.3,ASME B31.4,API1104,BS4515, ASME SEC VIII,AWSD1.1

Employment history
Employer: ALL SEAS
Duration: DEC 2007 to till date.
Client: Reliance industries Ltd. (Job No: 309930)
Project: Dhirubhai 1&3 (PIPELAY OFFSHORE) - INDIA
Deep sea water pipeline.
Designation: Pipelay QC (Welding & Coating)

Q.C. Welding/Coating Inspection duties carried out onboard ¡¥PLMV Audacia¡¦&TogMore Vessel. Employed on projects in the. Work carried out on Reliance projects. Monitoring of material verification and traceability, weld procedure and welder qualifications, production pipeline welding, subsea PLET and PLEM installation, (Infocus) AUT weld scan interpretation, field joint coating and sacrificial anode installation procedures. Welding systems including Pheonix gold mig (single and double head), fcaw, saw, tig, and electrode welding. Field joint coating with fusion bonded epoxy coating, cold applied laminate, heat shrink anti-corrosion tapes and High density polyurethane foam field joint infill.

Employer: VELOSI
P.O.Box: 3408, Doha, QATAR
Duration: June 2007 to Nov2007.
Client: SIME DARBY ENGINEERING (H.O: Malaysia)
Project: EPIC for Well head jacket, Topside pipe, submarine,
Pipelines, Tie-in and Top side modification
(QP-Project No: 2329 &2330) Pipe lay barge
Designation: : CLIENT QC Representative
Location: QATAR-offshore (Qatar Petroleum)Pipe lay Barge
Duration: June 2007 to Till Date.
„« Working as a Client QC Representative to monitor the NPCC job for all the activities and co-ordination for ( Pipe lay barge) Sub-marine Pipeline &associated job in Qatar offshore For Qatar Petroleum (QP).NPCC Barge DLB 1000
The following project Involved in SAUDI ARAMCO (K.S.A) AS A Saudi Aramco
Approved QC INSPECTOR FOR ARAMCO PROJECT¡¦S
Client: TECHINT INTERNATIONAL
Project: BI-10-8014/8022 (Khursaniya plant & pipeline project)
Location: Jubail-K.S.A
Designation: : QA/QC for Welding/mechanical/ Painting
Duration: November 2006 to May2007

Client: Contracting and trading (C.A.T)
Project: BI-10-3550/3542 Two grades of gasoline.(Riyadh refinery & Bulk plant)
Location: Riyadh Refinery &Bulk Plant-(Riyadh)-K.S.A
Designation: QA/QC for Welding/Painting /mechanical
Duration: June 2006 to November 2006

Employer: VINCOTTE INTERNATIONAL MIDDLE EAST
P.O.Box: 4788, Abu Dhabi, U.A.E
Designation: Inspector- Welding/mechanical/ Painting
Pipeline QC/ Plant inspection.
Duration: JAN 1999 to may2006.
ASSIGNMENTS CARRIED OUT
ZADCO (ZAKUM DEVELOPMENT COMPANY)- ADNOC GROUP
zakkum field offshore (ABUDHABI) for 6year's for following activities

„« Work Involved as QC/plant - Inspector including planning and organizing WeldingInspection activities in a timely manner and report to Engineering head.

„« General visual inspection (GVI) of structure (primary, secondary and tertiary) vessel saddles, flare package unit enclosures, cabinets, instruments, electrical / instrumentation cable tray¡¦s/tubing, Risers, Vessels, Pipeworks, Valves, Valve actuators x-mas trees, Helideck frame support, hatches and net, mape crane Riser neoprenre, Flooring, Deck grating, Topside piping including oil&gas deluge fire waterline and water injection lines, Boat landing shock cell riserprotectors, conductor Hand rails and non metallic items.

„« Acting as a Inspection Engineer for plant, wellhead /separation platform during absence of Inspection Engineer.

„« Inspection of Painting, coating & insulation and submission of documentation

„« Pipe lay barge QC activities and co-ordination during sub marine Pipeline.

„« All kind of inspection jobs involved in separation platform, gas treatment plant, power generation plant, water injection plant, and related equipment.

„« Integrity survey of dissimilar fasteners & bolt/nut survey

„« Integrity survey of corroded flanges.

„« Integrity System review for oil, gas, water, and drain system in separation platform

„« Project co-ordination in various offshore project like topside piping for support and piping modification and repair work( patch plate )

„« Plant failure analysis and preventive action with integrity survey

„« Co-ordination with Pre& Final hook up for wellhead platform (oil, water)

„« Isometric drawing preparation with Microsoft excel

„« NDT inspection on various jobs.

„« Witnessing and running welding procedures and qualification of welder.

„« Preparation of As-built drawings and punch list.

„« Organizing NDT activities for the project, radiographic film interpretation as per client specs.
„« Annual Corrosion monitoring of plant piping. Inspection of incoming materials.

„« Maintaining welding inspection logs and other relevant document.

„« Witnessing of hydro test & pneumatic test on piping, valves, oil flow line's etc.

NDC (NATIONAL DRILLING COMPANY)- ADNOC GROUP
The work involved visual inspection, Welding Inspection on drilling equipment. Radiographic film interpretation, Rig leg inspection, During leg welding offering of NDT requirement. Welding Inspection of Onshore, Offshore rigs,
VARIOUS CLIENTS
The work involved visual inspection, QC activities, Welding inspection in various types of columns pressure vessel heat exchanger tank forms rotary equipment & maintenance.

Employer: SIGMA SPECIALISED INSPECTION SERVICES
Abu Dhabi, U.A.E
Designation: QC Inspector
Duration: JULY 1997 to DEC1998.
Welding Inspection, NDT Inspection, QA/QC inspection activities, witnessing Hydro Test, Co-ordinating with Client, Third Party Certification agencies etc. Report to Senior Welding Inspector / Inspection co-ordinator.
QA/QC, WELD INSPECTION, NDT INSPECTION ON following project.
„« Inspection of Painting, coating & insulation and submission of documentation

„« Turret calm buoy and associated pipelines of Blue Water BV for Azerbaijan Western Route project.
„« Calm buoys for various clients constructed by SBM offshore systems and SOFEC Inc Mooring anchor and pipelines by Kvaerner R.J. Brown for apache Stag field.

„« Turret FPSO & Associated piping complex for- Laminaria Coralina field development constructed by SBM offshore systems.

„« Structural & piping work's for various project in sigma eng work.

„« Al taweelah waterpower project for repair&maintenance work at sigma egg work's

Employer: BHARAT HEAVY ELECTRICALS LTD. (BHEL)
Thiruchirappalli, Tamil Nadu, INDIA.
Designation: QC Supervisor

Duration: Jan 1997 to June 1997

BHEL is one of the 2nd largest Boiler manufacturers in Asia.

„« Planning and organizing of boiler fitting manufacturing, welding inspection.
„« Inspection of Painting, coating & insulation and submission of documentation
„« Raw material inspection, process inspection, product testing, dimensional checking.

„« Traceablity and calibration equipment and gauges used for inspection and QA/QC.

„« Witnessing the ndt method. Co-ordination with production department.

„« Checking welding joint fit-up&recommendation for welding on plate formed Pipe, Boiler fitting, Push out TEE, Pullout TEE, Dish end, Reducer.

„« Stage wise all inspection during boiler manufacturing.

Employer: G.B. ENGG SERVICES, TRICHY,
TAMIL NADU, INDIA.
Designation: QC Co-coordinator, QC Inspector

Duration: May 1992 to October 1996.
Company Profile:
An ISO 9001 Company manufacturer of various types of Boilers, Pressure Vessels, Hear Exchangers, Economisers, Super Heaters, Re Heaters, Header Panel Condenser, High and Low Pressure Piping. Obtained ASME ¡¥U¡¦ and ¡¥S¡¦ stamps.

„« In charge and co-coordinating of welding inspection activities with group welding / QA/QC inspectors. Inspection of Painting, coating & insulation and submission of documentation

„« Stage wise inspection and testing at work.

„« Visual inspection, monitoring welding, Pre heating and PWHT.

„« NDT inspection on piping & boiler fitting.

„« Lamination check by ultrasonic testing.

„« Review of welding procedure specification (WPS) and procedure qualification record (PQR)

„« Inspection of welding process, base metal, filler metals, and welding electrodes, Reviewing of NDT reports and preparation of punch list& As-built drawings

„« Witnessing of hydro test & pneumatic test for piping, vessel, boiler component.

„« Conducting NDT for the Welding surveillance of Piping & Structures and Q.C Documentation & Interpretation of Radiographic films
Employer: SMR INDUSTRIES, TRICHY, TAMIL NADU, INDIA.
Designation: QC Supervisor.
Duration: April 1991 to March 1992.
SMR is the one of the BHEL ancillary contractor.

„« Conducting NDT for the Welding surveillance of Piping and Structures.
„« Planning and organizing of welding inspection and NDT activities.
„« Inspection of Painting, coating & insulation and submission of documentation.
„« Developing Welding procedure methods and practices.
„« Stage wise inspection and testing at work.
„« Review of welding procedure specification (WPS) and procedure qualification record (PQR).
„« Qualification of welders.
„« Inspection of welding process, base metal, filler metals, and welding electrodes.
„« Reviewing of NDT reports.
„« Interpretation of Radiographic films.
„« Inspection of hydro test & pneumatic test for piping.
„« Monitoring preheating & post weld heat treatment techniques as required.
„« Q.C Documentation.
Computer Proficiency: Ms-office

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1351 to 1400 of 6635)Go to Search Parameters...
Brief Description
OBJECTIVE: To utilize my experience in manufacturing and construction. Using various software programs, and engineering disciplines, (24,000hrs) Of AUTOCAD experience.
More than 14 years process & project engineer experience in Oil & Gas and Oil Refinery.
CAREER OBJECTIVE A suitable, challenging, and rewarding position in Petroleum Engineering.
Working Experiences as Senior Process Engineer from 1992 - 2003 in LNG/ LPG Plant of PT. Badak NGL in Bontang East Kalimantan Indonesia. I have been working for PT. Badak NGL over 20 years. Previous Job experienced in PT. Badak as Senior Production Planning Engineer from 1983 - 1991.
ERP Consultant (functional and technical) : MFG-PRO and Progress, Axapta, Movex, SAP Software Development Project Manager : Visual Basic, Oracle, Access, SQL-Server
To pursue challenging career where I can utilize my intellect technical skills so as to enhance competence of an organization and myself.
Geologist with nine years of experience both in the field and office. Have managed field operations, core retrieval and interpreted field samples throughought Alberta, BC, Saskatchewan, New Brunswick and in Colorado USA.
I have multilingual skills and am fluent at Russian, Turkish and good atdrilling
Multi-Disciplined NDT Technician/Inspector with Rope Access. UT Level 2, MP Level 2, PT Level 2, IRATA Rope Access Level 1. Currently busy with International Offshore Survival Certification.
Product Support for Hydraulic Drilling Rigs and Screw Compressors
Process Engineer
Proactive and skilled professional with a solid supervisory background and experience developed on projects in Venezuela
Japanese and English Speaking Mechanical Engineer
Good Capability and ability to get goal the project with safety, quality, planning and costing
Reservoir Simulation Engineer with 10 years of experience in Oil & Gas Production and Exploration. Living in Trinidad and Tobago
Overall seven years experience in leading and managing the entire gamut of Control Systems (DCS, PLC etc.) & Procurement Management, Maintenance Management
HSE Professional having 7 years experience. Having knowledge in Risk Assesment,HAZID,HAZAN and HAZOP studies;ISO 9001:2000 and ENvironmental Management 14001 and OSHAS 18001
To associate myself with an organization, where there is an opportunity to quench my zeal, have zest, provide enduring services, share, contribute and enhance my skills and knowledge.
Seven Years Experience in Oil and Gas Industries, Senior Pipeline Engineer, Finite Element Specialist, Cable Engineer, Pressure Vessel Designer
More than 23 years experience as Sr. rotating techn/foreman in the refinery, responsible for the repair, troubleshooting, modification, preventive and predictive maint. of all rotating equipt.; ensure safety, planning, scheduling of personnels, preparations of tools and spare parts.
Innovative Professional with 26 years of progressive experience in engineering design, maintenance planning and management, including 16 years in the Oil/Gas industry.
Over 18 years experience in construction, installation and mechanical assemblies, heavy
My background has 15 years of Heavy chemicals, Dyes, Petrochemicals process safety and Refinery Construction HSE experience in India as well as foreign countries Recently acquired NEBOSH Qualification
With 25 years of experience in operating a baseoil refinery including the utilities, a bitumen blowing facility, oil movements and storage and its logistics,.
Chemical engineer with twenty four years of experience in the Oil & Gas, Oil Processing and Petrochemical industries.
Mechanical/Piping Engr., Design of Process Plant Layout and Piping, Installation Engr. (Offshore), Pipeline Engr. ( Onshore ), Sofwareused: Autocad, PDMS, PDS, Autoplant, Caesar II for stress analysis.
A multi-disciplined, goal orientated and experienced Commissioning Manager and Engineer with excellent communication, organisational and personnel management skills on advanced technology, high value, schedule critical and high profile projects.
Objective : A suitable position in project planning & controls or allied departments providing the opportunity to make a good contribution to your organization goals through continued development of professional skills, hard work and application of acquired knowledge.Experience total - 12 years
Electrical Maintenance Engineer - Has 12 Years Experience.
More than 10 years experince in the field of Welding Inspection. Presently working with Saudi Aramco as Sr. Project Inspector.
NUCLEAR SAFETY ENGINEER / NEBOSH INTERNATIONAL
Around sixteen years of extensive experience in Instrumentation and Control Systems for chemical and petrochemical industry that includes project engineering work, installation and testing, commissioning and maintenance of DCS / PLC systems.
experienced in processing seismic data, land/marine, onshore/offshore, 2D/3D, QC/QA analysis, strong in first break picking, velocity analysis, multiple attenuation, promax, green moutain, mesa softwares.
Instrument Design Engineer
I am currently seeking an overseas position in the petrochemical industry. I am focusing on China, S.E. Asia, Australia, New Zealand, Mexico and S. America. I have 17 years of experience managing the design and construction of capital projects in the petrochemical industry.
SUMMARY 95 - Present Varied positions See detailed CV Exxon Mobil Transfield Worley JV (TW JV) Halliburton TW JV Brown & Root (Thailand) Kavaerner Norway AOC North Sea United Construction Woodside Aust
Oil and Gas Gas processing and NGL recovery On-line optimization of petrochemical plants advanced process control Information Technology
I would like to apply with your company for the position of a Electrician where my 20 plus years of oilfield experience will help you to obtain your company's mission. I have worked successfully in Argentina, Bolivia, Turkmenistan , Ecuador, Congo, and Gabon.
I have extensive experience in project evaluation and execution from conceptual phase to abandonment. Strong background in production operations and production enhancement. Recent work in the area of technology identification. Extensive experience in asset team management in the upstream business.
Seeking employment in the Environmental Industry. I hold Bachelor and Masters degree in Petroleum Engineering and will complete another Masters degree in Hydrogeology by 05/02.
Mechanical, maintenance engineer
Chemist, Inorganic, Organometallic, Organic
Interested i n a position where I can utilize my knowledge of drilling systems and equipment , particularly sub sea related engineering. I have good man management skills as well as general managerial abilities.
Work Experience -15 Years well established organization for inspection activities, Project co-ordination Inspection , QA/QC / Welding / Mechanical /Piping /Painting & Pipe lay Barge Deep sea Sub-Marine Pipeline project.
LAN,WAN,Microwave ,Automatic transfar switch,low and high voltage electrical panels
Engineered stimulation and cement jobs and enhanced recovery work. Have training and development certification. Have extensive operations management experience. Have both upstream and midstream experience
MAsters Degree + 6yrs of exp + Sr. Process Engg
Total Year of Experience : 12 Years (Oil & Gas Refinery, Petrochemicals-methanol, ammonia, urea, utility,Ship Loading Arm Jetty, Steam & Gas Power plant.
I have 20 Yrs exp., after Dip. in Mech. engg. & Safety Engineer/Officer have 12 yrs exp., mainly in the field of Oil, Gas, Petrochemical & power plants industries in maintanance, shutdown & construction works in India & Gulf countries.
I am a reservoir simulation engineer with experience in both compositional and black oil. Additional skils include geostatistics, petrophysical evaluation and cased hole log anaylsis including production logs.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   [ 28 ]   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com