Resume - AT PRESENT I AM ON THE VACATION FROM PETROKEMYA (SABIC)KSA AND WORKING FOR ARCHI...

Misco Jobs

Resume #71650

CONTACT INFORMATION:
View contact information...

Sub: Application for the post of - Inst. & Control system Supritendent

I wish to offer my candidature for the above-mentioned post in your esteemed organization. I enclose here with detail of my qualification and experience for your kind perusal and consideration.

As such, I have gained good experience as Asst.Supritendent, Support supervisor, Quality control inspector and
Loop checking incharge for past 14 years in process Instrumentation, Static & Rotating Equipment Protection & Control System,Inspection, Maintenance, Commissioning, Start-up, Breakdown and Turnaround activities associated with Refinery, Petrochemical and Atomic Research centre in India and Saudi Arabia.

Presently Working in ARABIAN PETROCHEMICAL COMPANY (PETROKEMYA) a SABIC affiliated Company at Al ¡VJubail through Al-Hugayet Trading and Contracting Co since 2002 to till date as Control system senior.

Post Applied For: Inst. & Control system Superintendent

Experience More than 14 years in Process Instrumentation, Static / Rotating equipment Protection & control system, Inspection,, commissioning, start-up Maintenance, shutdown and Turnaround activities associated with Refinery, Petrochemical, and Atomic Research Centre in INDIA and SAUDI ARABIA.

Control System Engineer from 20th March 2002 to till date.
* Arabian Petrochemical Company (Petrokemya) Olefins ¡V III through Hugayet Trading and Contracting Co. Dammam KSA.
* Monitored and Managed all field instrumentation and control system activities related to production of (Ethylene, Propylene, Benzene, Butene) by the below mentioned process.
* Experience includes Feed preparation, Feed filtration, Cracking Furnaces, Boiler, Compressors, Separation, Sulfur removal, Refrigerant preparation, Benzene and Butene unit related Utilities.

Instrumentation Supervisor from 17TH Jan 2000 to 21st feb.2002.

* Saudi European petrochemical company (Ibn Zahr) AL ¡V Jubail (A Sabic affiliate) MTBE, PP¡V1 and PP¡V II Plant through Al ¡V Hugayet Trading and Contracting Co.
* Monitored and Maintained all types of maintenance activities related to
* instrumentation and control system like routine Preventive and corrective maintenance, Repair Trouble shooting Breakdown and Turn around activities for MTBE, PP- 1 and PP ¡V II plant. Also selected as support supervisor with the instrument team from maintenance side for the PP ¡V II world largest polypropylene project and after start up of the plant continued to the maintenance till company maintenance contract.

Asst.QA/Q.C Engineer( Instrumentation) from 24th Feb.1999 to 02nd Dec.1999.

* Hindustan Petrolium Corporation Ltd (Mahul). Mumbai India through Hyundai Heavy industries Ltd.
* Assigned as Asst Quality Assurance and Quality Control Engg.for their new DHDS ( Dehydrogen Desulpherisation) project since erection upto maintenance support by the construction company.
* During construction Involve in all the construction activities like checking of the instruments as per their specification and the client standard.Checking the instruments reliability physically and functionally.
* Inspection of the field instruments erection as per their Isometric drawings.
* verification of the connections in the field, marshalling cabinets, system cabinets and their consoles.
* After start up of the units worked with the maintenance Q.A/Q.C Engg.for updation of as built drawings also recheck and updated the drawings like ILD's
And P&ID's.

Instrument Supervisor from 05th Nov.1996 to 04th Dec.1998.

Arabian Alkali company.( SODA) Al ¡V jubail K.S.A (Direct Hire).
* worked as maintenance Supervisor have performed all the maintenance activities related to field instruments DCS and ESD system with full personnel and equipment safety like routine Preventive and corrective maintenance,trouble shooting for major problems.Also attended breakdowns and worked as lead man in the yearly turnarounds.

Sr.Inst. Supervisor/Q.C Inspector from 03Jan. 1995 to 19th Sep.1996.
* Booster Compressor Platform ( BCP ¡V A & B) ONGC Offshore Bombay High. India through Hyundai heavy industries Ltd.
* Appointed as Sr.Inst.Supervisor for upgradation of DCS with the TDC-3000
and ESD with the Triconix TMR also many of the field instruments by upgraded and advanced instruments and since commissioning phase assigned as Q.C Inspector on the recommendation of the client ( ONGC ) Quality control department and continued to the maintainence until service.

Q.C Inspector ( I/C) Instrumentation and Control system from 11th May 1993 to 05th Dec 1994.
* Bharat Petrolium Corporation Ltd. Mumbai (India) through Hyundai Heavy Industries Ltd.
* Joined as Q.C Inspector for their on going DHDS (Dehydrogen Desulpherisation) project. Assigned as Calibration shop incharge and responsible for testing and calibration of all types of field instruments, also responsible for layed cable inspection, cable termination in the junction boxes marshalling cabinets, system cabinets upto system consoles. During commissioning worked as lead man for the instrument commissioning group from ( BPCL) Client side and responsible for the night shift instrumentation activities by contractors and reporting to BPCL maintenance supervisor.

Loop checking Incharge from 13th March.1992 to 10th May.1993
* Bhabha Atomic Research Centre Trombay Mumbai through Hyundai Heavy Industries Ltd.
* Joined as an Instrument Supervisor and responsible for calibration of the instruments in the lab and in the field as well also worked as member of loop checking group and worked as shift technician during commissioning and startup after start up of the plant continued to the maintenance upto under warranty of the plant by the company.

Qualification

Academic: Passed Intermediate of Science ( I.Sc ) with Mathematics under the Bihar
Intermediate Education Council Patna.

Technical: Passed First Class Diploma in Instrumentation Engineering from
Aligarh Muslim University Aligarh. ( India )

Training
SAP Orientation Training, Ventil Computer Registration System for Test and
Reconditioning of Control Valve Training.

Job Description

ƒæ Honeywell TDC-3000, YOKOGAWA CENTUM XL,VALMET CLASSIC &VALMET XD Distributed Control System
„« System Failures Trouble Shooting and Maintenance.
„« Point configuration, Picture Editing, Group Configuration & Button Configuration.
„« System Backup Disk Preparation and Updating.
„« Loop checking & Loop Modification.

ƒæ TRICONIX (TRISTATION -1131), Modicon (984-680 / 685E) ABB August System,
ƒæ SIEMENS (SIMATIC S5-400 & S5-700), Allen-Bradley (PLC-5 & SLC-500), Programmable Logic Controller
„« System Failures Trouble Shooting and Maintenance.
„« System Backup Disk Preparation and Updating.
„« Loop & Logic checking.

ƒæ Trisen (TS 310) & PEAK - 150 Digital Control System as Governor
„« System Failures Trouble Shooting and Maintenance.
„« Loop, Calibration & Configuration Checking.
„« Card level Servicing & Repair.

ƒæ Mass and Volume flow metering station (Schlumberger 7915, Instromet 782-MS & Omni Flow computer)
„« System Failures Trouble Shooting and Maintenance.
„« Loop, Calibration & Configuration Checking.
„« Card level Servicing & Repair.
„« Preventive Maintenance check.

ƒæ Bently Nevada Vibration System (3000, 3300 & 3500 series)
„« System Failures Trouble Shooting and Maintenance.
„« Probe and Proximitor characteristics check.
„« Monitor & Proximitor calibration.
„« Monitor set point and setting configuration modification.
„« Rotor axial float and radial Probe adjustment.

ƒæ Indikon Torque meters
„« System Failures Trouble Shooting and Maintenance.
„« Monitor Calibration and Loop checking.
„« Card level Servicing and repair.

ƒæ Commissioning and loop checking of Sequence interlocks for Gas Compressors (Rotoflow Turbo Expander & Sundyne).
ƒæ Also having very good experience with SOE (Sequence of events) and PHD ( Process History Database ) systems.

ƒæ Inspection, Calibration, Commissioning, Repair and Preventive Maintenance of: -
„« Honeywell's Smartline Pressure, Flow, Temperature & Level Transmitters with Smart Field Communicators.
„« Rosemount Smart Family Pressure, Flow, Temperature & Level Transmitters with Hart communicators
„« Yokogawa Smart Family Pressure, Flow, Temperature & Level Transmitters with Hart communicators
„« Yamatake Smart Family Pressure, Flow, Temperature & Level Transmitters with Hart communicators
„« Valmet Conventional Family Presssure,Flow,Temperature &Level Transmitters
„« Pressure, Level, Flow, Temperature, Vibration & Electronic monitor switches.
„« Strumentazione industriale S.p.A Pitch control for Fin Fans.
„« Magnetrol Capacitance type level Transmitter & Drexel Brook RF level switches.
„« Endress and Hausser Ultrasonic Level transmitter and Level Switches.
„« Ohmart Nuclear Level transmitter and switches.
„« Pneumatic controllers & Indicators.
„« Masoneilan, Neles Jamesbury, Valtek, Novo pignone & Fisher Control Valves.
„« Fieldvue Digital valve controller DVC5000 series and DVC6000 series
„« Orbit On-Off Valves.
„« Temperature & Speed Monitors, Yamatake Controllers and Indicators.
„« Enraf Nonius 854 Advanced Technology Gauge for Tank Level Gauging Systems.
„« Rosemount Micro Motion Mass Flow Meters (CMF050 / RFT9739).
„« UV/IR flame detector maintenance, faultfinding, servicing and replacement of flame scanners and flame amplifiers for Boilers and Incinerators.

ƒæ Providing Technical and maintenance support for safe operation of the plant functionality of DCS and ESD System.
ƒæ Effective corrective maintenance breakdown period in PESD system, complex loop logic and replacement of I/O and associated modules.
ƒæ Involved in day to day preventive maintenance for field instruments, individually and team wise. Inspection,Calibration, Loop simulation based on ISO Procedures and standards.
ƒæ Co- ordinate with operation, Preparing equipment for maintenance and returning back to the safe service.
ƒæ Experience in case study of plant and modification implementation to avoid failure repetition
ƒæ Excellent skill in fault analysis and rectification in control system and field devices.
ƒæ Having good knowledge in servicing and calibration of Smart instrument devices with communicator, and servicing calibration of Pneumatic, Hydraulic, operated valves and accessories (Positioner, Booster relay, Lock up Relay, and I/P).
ƒæ Bently Nevada vibration monitoring system probe installation and calibration of probes and monitor with TK-3.
ƒæ Periodic check carried out in Trip loops and status confirmation.alarm simulation and verification.
ƒæ Trouble shooting and maintenance of rotating equipment protective control system such as Bently Nevada Vibration system,Trisen 310 Digital control system.
ƒæ Commissioning and Loop checking of Sequence Interlocks for Emergency Shutdown Systems and Unit Shutdown Systems..
ƒæ Commissioning of Solid-state (Electronics) based Interlock Control Panel.
ƒæ Commissioning of Microprocessor based Alarm Annunciator Systems.
ƒæ Commissioning, Maintenance and Trouble Shooting of CCTV and Weather monitoring Systems.
ƒæ Planning of Preventive Maintenance for all Field & Control Room Instruments as per company SOP.
ƒæ Preparing and Editing of procedures related to Preventive Maintenance for Instruments..
ƒæ Handling computerized Maintenance Management system (Maximo), SSRS (Sabic services request system) through SAP (System Application and product for Data processing ) system.
ƒæ Specially assigned for Instrument related failure Coding and Hierarchy preparation for Computerized Maintenance Management System (MAXIMO) developed in Oracle.
ƒæ Handling shifts independently & provided very good response on the on ¡V call in case of emergency in the plant. (05 years experience).
ƒæ Havin sound knowledge in safety factors within Hazordous locations and intrinsically safe equipments.
ƒæ I am fully conversant with P&ID. Process Flow Diagram, Hook up Interlock diagram, Logic Diagram, and IL Diagram.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4851 to 4900 of 6411)

Go to Search Parameters...

Brief Description

Entry Level Petroleum Engineer

Education: Diploma in Electronics Instrumentation & Control Engg. (63%) Skills: System & DCS Engineering, configuration of Simple and Complex loops and Generation of Graphics, Logics development. Attending FAT (Factory Acceptance Test)

I have Graduated from the Welding Engineering Technology program and am looking to be a Welding Inspector

Excellent inter personnel skills with, a professional attitude, expert trouble shooter & problem solver, a firm personality to see tough jobs as a leader and a team member.

Oil & Gas, Petrochemical Industry Specialist

Multi-skilled petroleum engineer, soon to have an MSc degree

PERSONAL ATTRIBUTES:

Free! I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

All aspects of mineral processing plant construction

Fluid Mechanics and Thermal Sciences

Multi Skill Engineer

An eight year experience including three year gulf experience, Abu Dhabi, UAE. Extensive experience in structural steel (fabrication, materials, drawings…etc). Diploma in Project management (PRMG) from The American University in Cairo, Egypt.

Senior Designer - Instrumentation - Electrical - Controls - Power

SENIOR DESIGN DRFTSMAN / TEAM LEADER

I am a Chemical Engineer, a (PE) Professional Engineer in Texas, (CSP) Certified Safety Professional and professional member of (ASSE) and (AICHE). Skills; Safety & Process Safety Management, auditing, incident investigation, risk analysis, training, behavior management

Oil, Gas, Chemical, Water Treatment. Senior Project Mgr. Flow Measurement Specialist, Adult Education Instructor,Assessor, Competency Assessment System Construction & Audit, ISO9000,More than 35 years Experience throughout 52 countries

Key word : Power Plant Engineer, Boiler Operation Engineer, Boiler Maintenance Engineer, Turbine Operation Engineer, Turbine Maintenance Engineer,Field Service Engineer, Field Supervisor, Boiler Estimate Engineer, Boiler Shift Supervisor, Boiler Operator,Boiler Performance Engineer,Start up Engineer

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

I am working as an Instrument Technician for a well known Fertilizer Plant in Pakistan since 2001 after completion of two years apprenticeship training and now i am confident that i can perform my job very well.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

Over 30 years of experience in the areas of QA/QC OBJECTIVE: A full-time position in Quality Assurance/ Contractor Coordinator/Construction Management.

A HIGHLY MOTIVATED AND COMPETENT MULTIDISCIPLINE ENGINEER with extensive hands-on experience in Offshore Oil and Gas projects and Power projects in India/ Malaysia/ Korea/ Brunei/ Singapore, who has developed:

I am a Professionally, Technically skilled - INSTRUMENTATION TECHNICIAN. Working in Oil Refinery

Qualification: Mechanical Engineering (National Diploma); Skills: AutoCAD 2000 Draughting, Project Costing, MRP (Materials Requirement Planning).

I am a Planner & Follow-up Engineer consolidated with the latest tools of projects management such as (Primavera 3e/c V4 , Expedition V8.5 and many supporting computer programs) and very presentable.

A dedicated worker who is able to solve on job problems and leads the team with motivation

Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.

BSc, of mechanical engineering and working on HSE field in oil & gas industry onshore gas site and perform all job responsibilities on field and office basis

I am a certified electrical engineer with 15 years experience

I've been working as HSES Advisor more than 5 years in different oil& gas projects such as Offshore and Onshore Pipe laying operations,platform constructions, Flotel, diving operations etc.

Aconex system user for Management on Line in Dubai Metro Project, 2. Health & Safety Environment (HSE Management), 3. Construction Management, 4. Computer software (Microsoft office& AutoCAD).

Computers and Automatic Control Engineer

Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc

Project managing to produce high performance Polyurethane

To get a challenging position in the field of Electrical Engineering in a growth oriented company, where I can apply the knowledge, skill and experience I have acquired for growth of my prospective employer and for my personal development.

I have vast experience in pipeline inspection involving smart pig, pipeline cleaning, coating. Also, i have experiences in commisioning/decommisioning of pipelines and other engineering maintenance activities relating to static equipment. I am very conversant with Microsoft office and HSE standards.

AT PRESENT I AM ON THE VACATION FROM PETROKEMYA (SABIC)KSA AND WORKING FOR ARCHIRODON CONSTRUCTION OVERSEAS CO.S.A IN DOHA -QATAR ON THE VISITING BASIS AND ASSIGNED AS PROJECT INCHARGE FOR THEIR ON GOING QATOFIN MARINE PROJECT DOHA-STATE OF QATAR.

Industry experience in Designing of Electrical System for Offshore / Onshore oil & Gas projects using Auto CAD, ETAP, MATLAB, CGLUX.

Good manager- exact-lovely-like travel-profetional in supporting in surface and tunnel excavation-english and arabic and farsi -hard worker

Inspection, Record Keeping, Supervision, Lighting, Fire Alarm and Communication Installations in all the buildings, Cable pulling/arrangement/terminations, Panel Installations, Cable tray and Assorted Fabrications, Piping( PVC and Galvanized Steel), Pre and Post Termination Tests, Maintenances.

Piping Designer / Draftsman

College education and master's degree in civil and environmental engineering within the research area of construction engineering and management

Petroleum Engineering – (Exploration & Development) Diploma

Experienced with Electronic Flow Computers along with having the basic knowledge of gas chromatographs, samplers, moisture analyzers and ultra-sonic flow meters. Along with experience installing and troubleshooting 900 MHZ, cellular, microwave, satellite and two-way radio systems.

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

14 years of experience in steel structures detailing and checking. I know the tools Auto CAD, X-Steel and Micro station for detailing the jobs. Now, working in Aumund Engineering Pvt. Ltd. as a Sr. engineer. my responsiblitie is to lead team for detailing.

Technical manager of Construction & Services Companies - Manages all the company activities, adiministratives excluded.

Experience in residential and commercial maintenance, landscape labor, cable laying, pipes, mechanical assembly for harley davidson, and seafood processing.

DCS, ESD, SCADA design and commissioning, expertise in field instruments design and commissioning

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 [ 98 ] 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out