Resume - Enviromental Process Engineer/Technician

Misco Jobs

Resume #71697

CONTACT INFORMATION:
View contact information...

Objective To secure a technical service position with a growth orientated company offering opportunity for professional development and advancement.
Experience 2007-2008 Halliburton Oooguruk Island, AK
Lead Operator
* Install, operate and repair solid control and grind and inject equipment.
* Supervise drilling fluid mixing and transferring of fluid from mudplant to drilling rig.
* Supervise five man crew in mudplant and grind and inject units.
2007-2007 MI Swaco Bakersfield, CA
Technical Service Engineer
* Provided technical support to servicemen and other colleagues daily and during special projects.
* Surveyed existing Drilling Waste Management installations to determine if they provided the customer optimal results.
* Reviewed upcoming Drilling Waste Management Installations to determine the required equipment and processes to provide the customer with their desired results through the specific environmental processes.
* My job assignments were located in Bakersfield, California, North Slope, Alaska and Ignacio, Colorado.
2004-2007 Brandt a National Oilwell Varco Company Bakersfield, CA
Senior Technician
* Installed, maintained, diagnosed and repaired Solids Control and Drilling Waste Management equipment located at both onshore and offshore drilling rigs.
* Project Manager in charge of drilling waste management for the San Andres seismic project.
* Project Manager on special assignment during Geothermal Drilling.
* My job assignments were located in Bakersfield, California, Nueve Leon, Mexico and the Gulf of Mexico.
1997-2004 Oiltools/Derrick Equipment Bakersfield, CA
Equipment Technician
* Operated a Mud Cooler and Cutting Dryers during the environmental process.
* Installed, maintained, diagnosed and repaired Solids Control and Drilling Waste Management equipment located at both onshore and offshore drilling rigs.
* Worked 14 consecutive days/nights with 14 consecutive days/nights off during offshore schedule and on call twenty-four hours a day, seven days a week during the onshore schedule.
* My job assignments were located in Bakersfield, California, Fort McMurray, Canada, Cerra Puerta, Mexico and the Gulf of Mexico.
1988-1997 TRW Brandt Bakersfield, CA
Offshore Technician
* Installed, maintained, diagnosed and repaired Solids Control and Drilling Waste Management equipment exclusively for off shore drilling rigs.
* Lead Offshore Operator located in the Gulf of Mexico.
* Project Manager of all offshore drilling projects.
* Worked 28 consecutive days/nights with 28 consecutive days/nights off.
1982-1988 Struthers Thermo Flood Bakersfield, CA
Construction Crew Lead, Technician
* Supervised six man crew in construction and retrofit of twenty five and fifty million btu generators.
* Maintained, diagnosed and repaired steam generators and atmospheric scrubbing units.

Education 1982 West High School Bakersfield, CA
* High School Diploma
Qualification Highlights

I possess over twenty years of experience operating, maintaining and troubleshooting High-Speed Decanting Centrifuges, Atmospheric and Vacuum Type Degassers, High Volume Mud Cleaners, Linear and Elliptical Motion Shale Shakers, Cutting Dryers, Mud Coolers, Cutting Conveyance Systems, Centrifugal, Positive Displacement and Diaphragm Type Pumps.
Additional Skills Microsoft Outlook Microsoft Outlook Express Microsoft Access PC Anywhere Adobe PhotoShop Windows NT/98/2000/XP/2003 Windows 3.1/95/98/ME/XP/2003
Training Certificates STOP Safety Training North Slope Safety Training H2S Confined Space Adult and Infant First Aid and CPR DRIVESMART Water Safety

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5801 to 5850 of 6411)

Go to Search Parameters...

Brief Description

I'm specialized in developing new water based decorative paints and in modifying existing decorative paint formulations.

Qualified Quantity Surveyor with experienced in Cost Planning, Estimating, Budget Control and Monitoring in building, construction and semicoductor industries.

Dynamic professional with BS in Mechanical Engineering from UCI seeking a challenging career in the oil refinery and/or power industries where technical and engineering leadership and direction are sought to execute projects from the developmental process to a finished state

construction/process plant cost estimator, certified project scheduling, projects control

Diploma in Mechnical Engineering with 5 years & 6 months of experience as Document Controller in Marine Tank Farm site of Reliance Petroleum Ltd. Jamnagar.

Dual Post Graduate Mechanical Engineer with 10 years of experience

Power Engineer/Operator Resume

Basic automotive schooling at technical school. One year automotive experience and three years work on Semi Tractor and Trailors

Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

M.Sc. Applied Geology (68%Marks), M.Tech Petroleum Geology(67%Marks). 1 Month industrial trainings in National Oil companies. Petroleum Geosciences is my career subject. Besides,having soft skills, i also am user of GIS softwares and also know some petroleum upstream softwares.

Management -Technical Skills: Catia,Solidworks-Mechanical Desktop-AutoCAD-FEA-Carrier-MasterCAM-Microsoft Office(Word,Excel,Powerpoint)-Windows(98,XP,Vista)

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

Automation Engineer having two years of practical experiance with various vendor products like Siemens, GE etc..

Environmental, Occupational Health and Safety Engineer

Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance.

AutoCAD, Office, CFD (Computational Fluid Dynamic), Basic Electric, Mechanical and Hydraulic.

Arc view 3.2a, ERDAS Imagine 8.7,Arc GIS 9.1, (All extensions),AutoCAD/DeskMap,Ms Office ,DEM,Spatial analysis,DBMS

Experience in ISO 9001, ISO 17025, ISO 17799 , Good Laboratory Practices(GLP) systems. The ISO 17025 and GLP are mainly focussed on testing and clinical laboraories. Almost 7 years of experience in Qulaity Management Systems as well as and System Administration activities.

BSc degree major in computer science; currently enrolled in CAPPA level 2; strong communication and analytical skills; self-motivated and positive attitude; efficient team player.

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Wide experience as HSE Coordinator as well as Safety Manager on several construction projects in live plants and heavy construction sites.

Lead Engineer for Aramco Transmission projects and Systems integrator also for Various overseas projects.

MECHANICAL ENGINEER

I have a University Degree in transport engineering. I’ve 3 years experience as cadet and OS. This year I’ll finish professional course and acquire navigator diploma. As beginner in offshore industry I’m ready to start at the bottom and begin my career on an oil rigs from entry–level positions.

Developement,depillaring with syowing,shortfirng,spporting,ventilation,surveying,

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Shift in-charge (Production Operator) & Maintenance Engineer-Electrical, 5+years experiences, MSc Power Engineering, Chalmers Technical University, Gotenborg Sweden, Management training, Computer operations (Windows application software, comsol multiphysics, Mathlab) skills, Plant safety training, p

Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in operations and maintenance field. Lead a group of technician troubleshoot and maintaining gas facilities such as valves, cathodic protection,pipeline inspection, regulating station etc..

I have work on 5 years experience in designing in mechanical engineering using Pro-Engineer, Pro-Intralink, Solidedge, Mechanical Desktop, Ansys

30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.

Scaffolding Engineer : Sales & Project Management, 6+ Years Exp

Experianced Petroleum Graduate

Technical, Managment, communication. Skills

I have over 5 years experience in the Electronics engineering field; and I am well versed in the areas of process control and Automation issues in conjunction with Software knowledge and Hardware design guidelines

Project Management

Enviromental Process Engineer/Technician

Over six years experience working as an engineering and environmental geologist. Manage, coordinate and field supervise all drilling activities and field work for large scale geotechnical and environmental projects for government and industrial clients in the eastern United States and Africa.

Document Control / Project Administrator

Currently working as a procurement engineer in an Engineering Firm in Tokyo Japan engaged in EPC contract works for Petrochemical Plants with minimum 3 years experience

To use and hone my technically organize skills, knowledge and experience to Attain excellence in the industry by providing total customer satisfaction in field of mechanical Industry.

Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.

Bachelor of Science in Mineral Engineering, eight years experience as a project/test manager for the explosives and ammunition testing industry. looking to transistion into the mining industry.

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

NSW Electrical Contractors Licence, OHS Safety Consultant Ticket, Qualified Electrical Fitter-Mechanic, Senior First Aid trained.

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

I have about 2 years experience as a Geologist.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 [ 117 ] 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out