Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #71734 next resume »»
CONTACT INFORMATION:
View contact information...

Career Objective

To actively participate in the improvement of the company where I work by further utilizing and enhancing my gained knowledge and skills, which I acquired through my job and training experiences, formal education and seminars in the field of Instrumentation/Analyzers and Control.

To help the company I belong, become successful by providing them quality and dedicated service in any position relating to my field.

Job Experiences

SIEMENS W.L.L.

P. O. Box 21757, Doha, Qatar
September 15, 2007 to present
Position Analyzer Technician

JG SUMMIT PETROCHEMICAL CORPORATION

Simlong, Batangas City, Philippines 4200
June 01, 2006 to September, 2007
Position I. C. E. Engineer

JDM AUTOMATIONSTECHNIK CORPORATION

Landayan, San Pedro, Laguna, Philippines 4200
June 14, 2004 to March 25, 2006
Position Instrumentation and Automation Engineer

JOB EXPERIENCES SUMMARY

Four years experience in industry in the field of On-line Analyzers, Instrumentations and Control. Worked both as technician and engineer in wide range of analyzers, instruments and control equipments. Has an excellent analytical skills in troubleshooting control related problems (experienced as PLC programmer) and other technical problems. Actively participated in maintenance of Process Online Analyzers and various laboratory equipments in JG Summit Petrochemicals. Has a strong diverse experience in commissioning, start up and maintenance jobs in Online Analyzer system in Dolphin Energy (LNG Plant in Ras Laffan, Qatar).
Main job responsibility is to properly and timely implement preventive and corrective maintenance activities including routine checks, servicing, calibrations, troubleshooting, shutdown activities and correlating process data with the analyzer and laboratory data.

SPECIFIC SYSTEMS, EQUIPMENTS AND INSTRUMENTS

On-line Analyzer System

- Gas Chromatographs, Tail Gas Analyzer, RVP Analyzer, IR Analyzers, Continuous Emission Analyzers, H2S Analyzers, Sulfur Analyzers, Hydrogen Analyzer (TCD), Oxygen Analyzers, Moisture Analyzers, Chlorine Analyzer and pH Analyzers

Process Instrumentation System

- Wide Range of Field Instruments like Pressure Sensors, Transmitters, Differential Pressure Transmitters, Level Gauges, Flowmeters, Temperature Sensors, Process Controllers, Converters, Transducers, Signal Conditioners, Positioners, Control Valves, etc...

Various Calibration Instruments and Equipments

- Laboratory Standard Reference Instruments for pressure, temperature, flow, relative humidity, weights, voltage, current and resistance
- Multifunction calibrators, industrial weighers and other process instruments

Seminars Attended

Field Service MAXUM Edition II
SIEMENS W.L L.
Ras Laffan Industrial City, Qatar
December 02 – 06, 2007

Reliable Solutions for HPI and Chemical Industries
SIEMENS Inc. Automations and Drives
JG Summit Petrochemical Corporation, Batangas City
June 04, 2007

Safety in the Use of Nuclear Equipment and Devices
Philippine Nuclear Research Institute
Commonwealth Ave, Quezon City
March 5 – 9, 2007

Sensing and Control Seminar
Omron Asia Pacific PTE LTD
Don Chino Roces Ave., Makati City
October 6, 2006

Natural Gas Exploration and Production
Shell Philippines Exploration B. V.
Batangas State University, Alangilan, Batangas City
February 04, 2004

ISO-14001, Environmental Management Systems
Batangas State University, Gov. Pablo Borbon Campus II
Alangilan, Batangas City
December 09, 2003

Understanding Fieldbus Technology
Trigon Management and Industrial Corporation
JEMTEE Bldg., 677 Boni Ave., cor Aliw st., Mandaluyong City
February 24, 2003

Factory Automation and Circuit Design
Intercoastal International Technologies Corporations
Sucat, Paranaque, Metro Manila
January 31, 2003

Pneumatic Technology
SMC Pneumatics Philippines Inc.
Carmelray Industrial Park II, Punta, Calamba, Laguna
December 13, 2003

Educational Attainment

College: Batangas State University
Gov. Pablo Borbon Campus II
Alangilan, Batangas City
1999 - 2004

Course: Bachelor of Science in Instrumentation and Control
Engineering
Honors Received: Outstanding

Secondary: Batangas National High School
Rizal, Ave., Batangas City
1995 - 1999

Primary: Simlong Elementary School
Simlong, Batangas City
1989 - 1995

Personal Data

Age: 26
Date of Birth: July 21, 1982
Place of Birth: Batangas City
Civil Status: Single
Nationality: Filipino
Religion: Roman Catholic
Height: 5'2"
Weight: 51 Kg
Mother: Gloria B. Blaza
Father: Samson D. Blaza
Language: English and Filipino

Character references available upon requests…

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2201 to 2250 of 6558)Go to Search Parameters...
Brief Description
Mech. Engineer & MBA with over eight (08) yrs of exp in Project Marketing. Engaged in BD activity for Process Package/ Eqpt required in Offshore/Onshore projects of Oil & Gas Sector with full exposure to Separation Eqpt, Process Heaters, Electrostatic Emulsion Treaters, Glycol Dehydrator, FG Skid.
I am a qualified mechanical engineer, graduated in 1993. Since than have been working in various projects of Power Plants. Presently, I am working as deputy manager (second to general manager). We are running furnace oil and gas operated power plants.
Third part analysis for field operation, Field Operation responsible, Risk analysis, Supplier responsible, Contact with the client responsible, Well Design Casing Design.
Having eleven years experience in field of Oil , Gas & Petrochemical industry
Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3
Passed Matriculation from Bombay Board in English,:Passed Diploma from Kohinoor Technical Institute in Industrial-Elect, Two years course.Attend Safety Training in QATAR GAS, SABIC,ADNOC . HSE Induction,H2S Awareness and Escape. Received Safety Award Certificate from ADNOC on its ongoing projects.
Bachelor of Electrical Engineering [BE] : 5 Years Hands On Experience in Power Utility Company in Medium and Low Voltage System Operations and High voltage 132KV/11KV Substation Protection Systems
Process Engineer, having 2 years of experience in Oil and Gas sector, working in FEED department. Having exposure to Process Simulation tool like HYSYS STEADY STATE HYSYS DYNAMIC SIMULATION, ASPEN PLUS, SULSIM and Equipment Design/Rating Software like HTRI, HTFS, KG TOWER, and SULCOL.
I am presently employed with Black&Veatch, a US based reputed company doing mainly Oil &Gas and EPC projects mainly in power plants.
Process engineer with two years of experience in the feild of basic enginnering, front end engineering design and precommissioning and commissioning of process plants.
Provide day to day on-site supervision of drilling operations to ensure operations are performed in accordance with the Drilling Program in a safe cost-effective manner.I m responsible for Health and Safety procedures being continuously enforced
Development, maintenance and utilization of the full field reservoir simulator
I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.
Total Exp. 2 years. Exploration, Drilling, Workover - offshore and onshore wells. Estimating cost of oprn., coordinating with service providers, supervising drilling operations.
PLC programming, installation and commissioning of motor drives/ process controller and instruments and have expertise in board-level repair of electronics controls and PC board.
•Leadership Quality,•Loyalty with the assigned responsibility,•Decision making •Desire to produce better results than previousability,
project and process engineering, erection and commissioing, trouble shooting, apicodes , hazop and iso.
Drilling supervision and engineering, well control instructor, rig commessioning
Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects
Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.
10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.
SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.
Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.
TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET
Welding Inspector
Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.
I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.
Master in Industrial Engineering (With 3.86/4 CGPAand BE in Mechanical engineering(With Honours) with adequate knowledge of computer including (MS Ooffice, autocad 200) and good communication skills.
Project Management
Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.
Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation
22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba
SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.
Senior Piping Designer PDS
Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.
Rig mechanic, mechanic supervisor, motorman, diesel mechanic
Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer
Mechanical Maintenance Engineer/contract and Procurement Engineer
Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat
QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.
Quality engineer in offshore and onshore fields
Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)
18 years in field operations, management, production engineering, gas processing. tight formations, CBM and shales.
B.Eng(Petroleum Engineering);Diploma(Object-oriented/Scientific programming);Experience in Cementing, Stimulation(CT/N2 jobs),Completions fluids/Wellbore clean-out tools
Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.
Petroluem Engineering
Electrical Engineer
Mechanical / Static / Pressure Vessel Engineer (~5 Years Oil & Gas Experience)
Worked both as technician and engineer in the field of Instrumentations, Analyzer and Control Systems
Wide range of well operations activities and also Onshore Support for Well Operations programmes / campaigns. Liaise directly with customers on and offshore ensuring that all activities, programmes and completions, etc. carried out meet the required safety and reporting standard
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   [ 45 ]   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com