Resume - mechanical structure engineer

Misco Jobs

Resume #71807

CONTACT INFORMATION:
View contact information...

Age: 31
Marital status: Single

SKILLS SUMMARY:
- Mechanical engineer,
- Engineering calculations,
- 3D modeling skills (MSC Patran, Maestro Modeller, Genie Framework, Mechanical Desktop, AutoCAD),
- Use of FEM analysis in stress and self vibrations calculations (MSC Nastran).

PROFESSIONAL EXPERIENCE:

Present
Freelancer engineer. Conducted work:
Freelancer engineer (stress calculations). Conducted work:
- Stress calculation for conrod models in Abaqus ver 6.7-1.
- Stress calculation of engine mounting brackets in Abaqus ver 6.7-1.
- Thermo mechanical calculation of cylinder flame head in Abaqus ver 6.7-1.
- Use of Genie program (SESAM package) for frame check,
- Preparation of load cases for conducted analyses,
- Stress calculations for pipelines in CAESAR II (ver 4.5) according to ASME B31.3 standard,
Review of design for lifting appliances (stress evaluation) i.e.
- 100Te spreader bar,
- Rigitiser used for transportation,
- Chute handling system capacity 45Te, installed on board of vessel,
- Cable drums ~400Te gross including lifting arrangement,
- Offshore containers used for transportation and equipment handling i.e. valves (gross weight up to 25Te).

06/2004 - 10/2006
Mechanical engineer - numerical analysis specialist in Ship Design and Research Center.
Research and Development Department - Ship Structures Division.
Work in stress and vibrations calculation group.
- Build of FE models in MAESTRO Modeller,
- Structure evaluation with help of MG/DSA (stresses and adequacy parameters),
- Structural analysis of structure regions,
- Build of FE surface and solid models for purpose of analysis in MSC PATRAN,
- Global–local analysis for structure with MSC NASTRAN and MSC PATRAN,
- Application of boundary conditions and preparation of load cases for conducted analysis,
- Fatigue assessment for specified areas of analyzed structure including scallops (on level and two levels pod foundations, seating for equipment and crane installed on board) with kelp of MSC NASTRAN and MSC PATRAN,
- Build of model of in AutoSEA2 for prediction of acoustic response of ship in the area of machinery space for fast container ship and car ferry (model included ship conversion according customer's request),
- Vibration analysis of pod foundations and the hull, natural and enforced vibrations analysis (including induced pressure pulses applied for the hull),
- Thermal analysis for exhaust pipelines (MSC NASTRAN, MSC PATRAN),
- Noise level measurements (use of B-K meter) and assistance at vibrations measurements during ship trials on car carrier,
- Supervision of conducted projects - stress calculations for ship structure and equipment installed on board and other mechanical facilities. Use of FEM Method (MSC Nastran, MSC Patran, Maestro Modeller). Contacts with customer and preparation of reports from conducted analysis.
- Impact of Phase Lag Between Propeller Excitation Components on Vibration of a Podded Propulsion Vessel - T-POD'2006. The Second International Conference on Technological Advances in Podded Propulsion

06/2002-06/2004
Senior assistant of designer at PROJMORS Sp. z o.o.
- Creation of technical documentation in 2D – assembly and fabrication drawings.
Preparation of technical directions for collaborating design groups. Projects for marine industry
(quay installations pumping stations), Oil Refinery, NAFTOPORT – fuel base, NATO organization and Polish Army
- Execution of technical expertises.
- Continuous use of AutoCAD 2002i - 2D design and conduction of necessary engineering calculations with help of MathCAD6.0 software,
- Occasional use of 3D modeling software - Mechanical Desktop ver 6.0,
- Preparation of technical specifications for projects,
- Execution of fabrication improvements according to construction company remarks.
- Making inventory of technological installations on fuel jetties.
- Design of handling system for tetrapodes - 50 tons star shaped concrete blocks.
- Improvement of design for slipway used to repair small ships.
- Design of technology for container terminal in Gdansk for Day &
Johnson Ltd. (Great Britain).

08/2000-08/2001
Intern, engineering dept. Advanced Machine & Engineering Co (USA).
- Design of the machines: handling systems, measuring system for automated cutting line series 100 and 200 (blade saws) offered by the company.
- Work within different workgroups: Design & Build Group, Fixture
Group designing workholding fixtures for parts of the machines (i.e.
castings) requiring machining.
- Creation of assembly drawings mentioned above machines and detail drawings for parts (with help of CAD tools such as Mechanical Desktop
5 & 6, AutoCAD2000i).
- Debugging of designed machines and conduction of all the necessary engineering calculations for designs (MathCAD 6.0).
- Supervision of assembly process designed machines and check of quality of made parts.
- Preparation of reports for customer containing description of work improvement in assembly of machines.

QUALIFICATIONS:
- Master of Science in Mechanical Engineering. Technical University of Gdansk. Marked out for very good marks archived during study. Graduated 2000.
- Languages: English (very good),
- A Level Exam (Polish, English, Mathematics, and Physics) passed with very good marks.
- FEM analysis in MAESTRO Modeler 8.1, MSC PATRAN, NASTRAN and Genie.
- Trained for API 579.
- Driver's license.

PERSONNEL ATTRIBUTES:
- Self motivated,
- Efficient in looking for solutions,
- Team player,
- Reliable.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5451 to 5500 of 6411)

Go to Search Parameters...

Brief Description

More than fourteen years of professional experience including six years of Saudia as Instrument engineer, Electrical engineer, Superintendent Electrical & instrumentation, Manger plant maintenance and Project Manager in the field of maintenance, construction and technical support services.

Supervises the installation, testing, pre-commissioning, commissioning & operation of Heating, Ventilation & Air Conditioning Systems comprising of Chillers, Heaters, Humidifiers, Air Handling Equipment, HVAC Equipments, Compressors, Cooling Towers, piping and control systems & Ducting work.

To secure a challenging position in Electrical / Instrument Engineer and Project Engineer in Refinery, Oil and Gas facilities and Petrochemical plant so that my professional background, extensive experience and technical abilities will be a valuable asset with in a progressive organization.

Instrument Engineer

Entry level Metallurgical Engineer; B.S. Metallurgical Engineering - University of Missouri-Rolla, EIT. Experienced in failure analysis, physical testing and microscopic evaluation.

Chemical Process Engineer

Laboratory Director, ISO certification and Quality experience, Environmental field, strong analytical background

2002–2004:Lecture Assistant at Fluid Machinery Laboratory, Mechanical Engineering Department ITB; 2003:Internship at PT. PUPUK KALTIM, Bontang, East Kalimantan, Indonesia, with subject: Thermodynamic analysis of CO2 High Pressure Centrifugal Compressor 3021, at KALTIM II Urea Unit Factory

I have completed my diploma in chemical engg and have done be in petroleum engg from mit pune. my project topic is "emulsified acid treatment for carbonate reservoir" which I have completed in ongc Mumbai

I am PhD in Geotechnical Engineering from Japan.

Over twenty years experience in tuning and repairing automated systems, proficient in problem solving and continuous improvement, focus on strategies to improve safety systems performance, resourceful in locating, storing and disseminating knowledge

Mechanical/Piping Designer with Experience in AutoCAD & PDMS

Possess degree in Mechanical Engineering (Hons.),

Project cost control / scheduling

Project Controls / Planning / Scheduler

I am a highly motivated and ambitious Senior Electrical Engineer who worked in Emirate , Saudi Arabia , Kuwait , Iraq & Lebanon since 1994 and interested to pursue my future professional career in your company. The scope of work I am looking for is a job in the field of Residential Industry ,

Over 26 years experience of Gological Explorations for various minerals in Government Sector. Now seeking for an upward change.

40 years in the land surveying profession, 30 years as a Licensed Land Surveyor, Multi-state Licenses

Diploma in mechanical engineer , i am working in mechanical supervisor in kuwait.

Telecommunications Professional Engineer with strong analysis capability, deep knowledge on telecommunications networks and telecom business processes. Outstanding operating, managing and administrative skills. Proficient usage of office utilities and advanced expertise with excel macros.

Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Account Management - International Department

I am a chmeical engineer having 11 years of expreince in diffrent chemicals fields

Painting inspector NACE level 1

Maintenance and Reliability Engineer with experience of 10+ years, working with Metals and mining Industry, Have experience of copper smelter, sulphuric acid plant and Phosphoric acid plant.

I am a geophysicist with a Ph.D. in Applied Science/Applied Physics. I am seeking a job in the oil/gas/mining industry. I have experience with GPR, seismology, computer modeling and C/C++ computer programming. I am a permanent U.S. Resident. I am willing to travel and/or live outside the U.S.

Dear Sir / Madam,

Onshore and offshore electrician. I worked on as a subcontructor with Imtech Marine on the ship Fairstar Fjord; as electrician on the Rig Sea Explorer (pride international); as painter on Rig Galaxy 2 (transocean)

MathCAD; Caesar II; Microsoft Office Applications

Marine Engineer from Greece, Languages: Arabic, English, Greek, Italian. Experience = 16 Y. Eni Oil Co. Ltd.1/6/ 1999. Title Senior Plant technician, skills: Microsoft word, excel, Amos, Internet

Mechanical engineer (4 yrs degree) with appx 15 yrs exp in Contract & Project management. LOOKING FOR CHANGE IN MIDDLE-EAST, CANADA OR INDIA (AVAILABLE FOR IMMEDIATE START)

Geologist with a very good computer literacy

Seeking a Management position where my considerable experience and knowledge of Construction civil estimating and project management that can be fully utilized to help drive employer profit margins and complete contracts on time.

Seeking a position as an Exploration Geologist/ Mining Geologist/Resource Geologist, utilising my past professional experience and educational background

Licensed Professional Geological Consultant

I am a B.E. Chemical with an aggregate of 72.73%. I will be much pleased to work in a competitive environment on challenging assignments that shall yield the twin benefits of the jobsatisfaction and a steady-paced professional growth.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

Computer Skills: Adobe Photoshop, MS Word, MS Excel, MS PowerPoint, MS Outlook, Internet; Programming Language: C; Design Skills: Pro-E2001i2 (Sketcher, Adv. Part Modelling, Surfacing, Assembly, Drafting, Mechanism); ABAQUS (Finite Element Analysis), ADAMS

Petroleum Engineer with Field onshore offshore experience. Experience in field operations and wellsite operations. Working in reservoir management and well testing.

Dear Sir,

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

Excellent PC knowledge and technical assistant experience

I have worked in management positions for over 15 years in both the construction and manufacturing industries. I have had up to 120 employees under my supervision at any given time. HR, production, purchasing, documentation and inventory all under my supervision. Workflow and quality #1 priority.

Metallurgical Engineer

I am an electrical engineer interested in the power field. I had an internship dealing with daily activities of an engineer and I have taken three power related classes.

I have over 20 years International Electrical/Instrumentation/Control Systems Construction and Commissioning Experience as Supervisor, Superintendent, and Managerial positions.

Ph.D. in Geology from IIT kharagpur, M.Tech.in Geology from IIT Roorkee, India

CSWIP 3.1 Welding Inspector, ASNT Level-II in NDT's RT/UT/MT/PT, ISNT Level-II in leak testing methods, Over 7.5 years in QC & Inspection with reputed Indian Multinational

Having 16 years experience in pumping and assescories of Pipe line, Motors, Engines, System study, Trouble shooting etc. Having abroad experince. Visited Lao PDR, Thailand, Srilanka. Handled Project works at varoius sites in India and in Abroad.

mechanical structure engineer

First Prev 101 102 103 104 105 106 107 108 109 [ 110 ] 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out