Resume - Mechanical Engineer/Supervisor(rotating machinery)

Misco Jobs

Resume #71925

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
L.M.E.(Diploma in Mechanical Engineering)Please enter brief description of your skills and qualifications.
------------

OBJECTIVE:
I wish t work as aRotating Equipment Engineer/Supervisor
------------

WORK EXPERIENCE:
Assignments Held:
11/07/2004 to Till now; Eni – Iran BV:
Working with Eni-Iran (AGIP) through GPS,at Iran in South Pars Phases 4&5 as a Rotating Equipment Supervisor in Large Gas Processing Plant of Capacity 2000MMScFD of Gas and 83,000 Barrels per day condensate.Handling Rotating Machineries Maintenance in Large Oil & Gas plant viz. Centrifugal compressors, Reciprocating compressors, Gas Turbines of GE Make(40 MW & 33MW), Power Generators of GE Make(33 MW), Air fans, Centrifugal & Reciprocating Pumps of single stage and multi stage, Metering pumps, Cryogenic tanks and Pumps(make by Elliot Ebara-japan).
Gained Sufficient Experience in this Project various plants like…
Gas processing, Condensate processing, Mercaptans, dehydration and acid gas removal, Mercury removal, Sulphur recovery, Refrigeration, Liquefaction of process plants and Utility plants like, Air compression, Nitrogen, Steam boilers, Metering of Liquefied gases etc…
01/06/2002 ~ 30/06/2004; SHELL PETROLEUM DEVELOPMENT CORPO RATION:

* From 2002 working with SPDC through Dietsmann (Monoco) as Mechanical Supervisor (Rotating Equipment) / On job trainer with SPDC,(SHELL) Nigeria at SANTABARABAR,CWARTHON CHANNEL 1,2,&3, KRAKAMA AND AWOBA Flow stations in Delta region producing 135,000 BBls/ day oil and 200 MMSCF/ day pressurized Gas. SPDC is a Joint venture of NNPC, SHELL, TOTAL FINA ELF, and AGIP. As a Mechanical Maintenance Supervisor in SHELL Handling operation & maintenance. of Oil & Gas Project (Off shore Platform with 42/42 Days On/Off rotation).
* Carrying day to day Jobs on oil flow Platform, well head checking, maintenance of Diesel Generators (1050KW capacity), Gas Generators (980KW) of Caterpillar make, Oil Transport pumps, Gas flow compressors of Reciprocating & Centrifugal (Nuovo-Pignone make), HP, LP, Test Separators, Surge vessel, Control Valves, Safety Valves,Well head Valves, Air Compressor Maintenance...etc.
23/03/2001 – 27/01/2002; CONOCO – SYRIA (CSDGL PROJECT):

* As a Mechanical Maintenance. Supervisor in CSDGL -CONOCO Syria Dez gas plant in Syria. LPG gas plant..
* Erection & Commissioning of HP Compressor(Multistage) GE Make(NUO-PIGNONE) and YARK, including leveling, alignment checks, grouting, Piping and its Stress checking, hot & cold alignment checks as per vendor specification.
* Erection & commissioning of all types of pumps in the plants including its leveling, alignment checks with & with out piping.
3/11/97 ~ 15/03/2001; Reliance petroleum limited (RPL / RIL):

Asst. Manager (Mech. Maintenance) at RIL(Reliance Industries Limited)- Jamnagar in polypropylene plant having capacity of about 600,000 MTPY. Taken active part in erection & commissioning of HP compressors of Sulzer and. magnetic Bearing compressor of make Demag Delaval strake (Netherlands) leveling, alignment checks, grouting including its piping and accessories as per vendor specifications.
28/10/93 ~ 14/08/97; K.N.P.C. Mina Al-Ahmadi Refinery, Kuwait

As Senior Supervisor at KNPC Mina Al-Ahmadi Refinery Kuwait, Through M/S KREMENCO Worked in various units like Hydrogen production, Kerosene Desulphurization, Diesel Desulphurization, L. P. G. (Gas Plant), Utilities, Atmospheric Residue Desulphurization, Bitumen, Sulfur Recovery, and Crude Distillation Units.

In KNPC Refinery the jobs handled are:
* Day to day maintenance of Pumps, Compressors, Steam Turbines Etc...
* Preventive maintenance of all rotating equipment's such as…Pumps, Compressors, Fin fans, Gearboxes, Agitators, Dozing pumps etc… as per planning CMMS schedule.
* Making inventory of consumables and spare Parts
* Making time sheets for employees, preparing history sheets of rotating equipment's and filing.

From 1972 –1993: The Fertilizer Corporation of India Ltd. Ramagundam-India
As a Maintenance Supervisor in F.C.I. Limited, Fertilizer Corporation of India – a Leading organization. Carried out all types of maintenance jobs as specified above

EDUCATION & CERTIFICATION:
Education ional qualification:
Diploma in Mech. Engineering. (LME)

Computer knowledge: MS word, MS Excel, MS PowSpecial Training Undergone:
* Safety & Accident Prevention & Fire Fighting
* Special Training obtained from Nuovo-Pignone at Florence-ITALY for Gas Turbines and Centrifugal Compressors
* Special Training obtained from KSB Pumps at PUNE (India).
* Special Training obtained to implement SAP Program as an End User In RELIANCE INDUSTRIES LTD.
* CMMS(IFS)for maintenance and EDMS for Documents
* During Installation, Commissioning, start-up, and major overhaul during operation Maintenance stages on
* 1) Gas Turbines to Drive generators/ to Drive HP Compressors(General electric, Alsthom)
* 2) Centrifugal & Reciprocating Compressors (Nuovo-Pignone, Atlascopco, Ebara).
erPoint,
ERI: SAP R/3 and CMMS (IFS) System (End User

ADDITIONAL INFORMATION:
Other Specific Challenges Handled:
Maintenance Support and trouble shooting for all complex rotating equipments of running plants. Support team member for De-bottle necking projects installation, commissioning and trouble shooting of modified/new complex equipments. Preparation of failure analysis reports. familiar with international standards and codes for testing of rotating equipment's. Review and approval of drawings, specification and technical document rotating equipments. Witnessing factory acceptance tests for compressors, gearboxes, pumps with respect to the standards and procedure. Co-ordination with various departments on Plant changes, Supporting plant operations, maintenance and planning departments in meeting the plants availability requirements.
Meeting with Vendors for various engineering activities. Inspection of vendor supplied Equipments.
A loyal, team-spirited. Excellent forecasting and decision-making skills in high-stress Environments.
Skills acquired in trouble shooting on Rotary Equipments:
Centrifugal Pumps and Reciprocating Pumps (single stage and multi stage with diffirent manufacturers)
Centrifugal Compressors and Reciprocating Compressors (single and multi stage with diffirent manufacturers)
Steam and Gas Turbines (GE & NUO-PIGNONE make 40 & 33 MW), Gear Box, Generators, Fin Fans, Valves etc…
Screw Compressors, Blowers, Extruder, etc…

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 6411)

Go to Search Parameters...

Brief Description

In his twenty-eight years of Oil and Gas industry experience, Mr. Senulis has been responsible for finding a total of 141.5BCFG and 17 MMBO in his career at Gulf Oil, Amerada Hess, Trans-Texas, Apache Corporation, Meridian Resources and his own company, Epicenter Exploration. He has a well rounded b

Petroleum engineer with wide experience as Reservoir Engineer. This experience was obtained working more than 20 years in Venezuela as well as others three years of international experience working in USA, Holland and Trinidad

25 years experience as Water Treatment Specialist and Account Manager

+29 years of professional experience,7 years in materials laboratories and Seismological research Institutes, 22 years working for E&P oil and gas Companies in Venezuela.Expertise as Petrophysicist, background in science,extensive knowledge of computer language and application,experience in clastic

Electrical Engineer with more than 20 years of experience with PLC and HMI projects: Design, implementation and commissioning. I've worked in projectos for Food and beverage,

DRILLING ENGINEER

Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.

I GRADUATED FROM TULSA UNIVERSITY ,OKLAHOMA,USA,1985.WITH A BACHELORE DEGREE IN PETROLEUM ENGINEERING,I HAVE A 24 YEARS OF EXPERIENCE IN DRILLING INDUSTRY , IN THE PRESENT TIME I'AM WORKING IN AN OIL CO. AS AN OPERATIONAL MANAGER.

17 yrs of experience in oil and gas industry including current assignment on offshore installation operations support, most recent oil and gas terminal design projects, commissioning group support, treatment works and pumping stations rehabilitation, pipeline construction and offshore platform.

Thirty years of experience in EH&S in the oil, construction, and the insurance industries. Throughout my career I have managed the safety and environmental requirements for drilling operations, gas processing plants, and offshore platforms. Participated in design review, permitting, environmental

A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment.

Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys.

Has over 24 years experience in instrumentation oil and gas, power generation , and process industries. Working experience as Commissioning supervisor to carry out Erection and commissioning of Control Instrumentation system for process industries & Thermal power stations. Successful commission

Wellservices Slickline Supervisor for the past thirty years.

Work experiance in plant maintenace , hydrogen plant and rig component and complete rig manufacturing. Welding and metalergy testing. Rig inspections covering all aspects. Thanks.

Qualification: B.Tech - Chemical Engineering, Skills: Pre-commissioning, commissioning, start up, test run and handing over of the plant to the operation department

Engineer, since 1988 when I graduated the Institute of Oil and Gas ,Ploiesti, Romania (IPG Ploiesti)

Well Integrity Specialist, Completion Production Engineer

I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis

Administrative and Technical support Telecom, Electrical, Electronics and Instrumentation professional with 19 years of experience in India & Abroad, fast-paced environments demanding strong organizational, technical and interpersonal skills

15+ years of various jobs with Foxboro DCS, and Triconex IPS/FGS Systems

Sales and marketing,Business development

I senior completion and workover engineer 19 yeas experience

Integrity management engineer with world leading expertise

Corrosion and Metallurgy Engineer, Painting and Coating Inspector, Engineer, QA/QC Inspector, Manager

My working career was started from 1988 after pass out Diploma in Electrical Engineering 3 year’s course. I have total 20 years of experience in various fields. I will do all types of maintenance, troubleshooting & commissioning works.

C&I / DCS/Control System/Engineering/Project Management

Electrical and Instrument Project Execution, Installation, Precomm, commissioning and Estimating

Night pusher with 21 years experience in oil and gas industry

Installation, erection & Maintenance of rotary & stationery, light and heavy mechanical equipments on different projects such as continues Sand Casting plant, Textile Mills Machinery, automotive spare manufacturing industry , Caustic Recovery plant, Storage Tanks, Design / drawing and execution

I am a registered Electrical Engineer graduated from a reputed institution. I was connected with Philippine National Oil Company- Energy Development Corporation Geothermal Power Plant for more than twenty years. Ihandle the position as Shift Supervisor upon retirement.

Mud Engineer 20yrs + experience All mud systems

Working with FFC as a Senior Maintenance Engineer

21 years experience in Drilling Engineering.

Instrumentation Design and Drafting, Autocad and INTools user

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

chemical engineer, skills: process safety management, HAZOP/HAZID, LOPA/SIL, RISK ASSESSMENT, HSE audit, contractor HSE management, Project HSE management

SAP, Kronos, Orcale, crystal report, business object, java, sql server,

Graduate Instrumentation Engineer with 19+ years experience as “Instrumentation Engineer- PMT/ EPC” in Pre-commissioning, Commissioning/ Start-up, Construction monitoring and Project management of major Overseas Oil & Gas (onshore) Projects

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

Over 20 years experience as a prospect generator and evaluator utilizing 2-D seismic and well logs. Understanding of business and financial aspects of exploration and production through CPA experience.

MECHANICAL ENGINEER

Engineering graduate in instrumentation & measurement,rich experience in erection & commissioning of instrumentation part of big project in areas like refinery, petrochemical & process plant,field+residual engineering during construction stage, inspection,as-built documentation,can guide a team of

Electrical Engineer - Testing, Commissioning, Maintenance, Planning, Reliability

Master of science in chemical engineering, positions such as technologist, process engineer and commissioning engineer. Strong backround in commissioning and stertup.

Mechanical Engineer/Supervisor(rotating machinery)

Don Westacott Chief Petrophysicist reservoir characterization and development of conventioanl and unconventional oil and gas reservoirs within US domestic and global sedimentary basins.

I am a Malaysian citizen with over 20 years experience in oil and gas and is currently employed by Qatar Petroleum as a Senior Development Geophysicist. I am an expert in Landmark’s Seiswork, Geoquest's IESX and Charisma 3D seismic interpretation, Z-Map+ and CPS-3

Electrical Engineer with 23 years experience in Oil & Gas Field

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out