Resume - I have completed Four Year Batchelor of Chemical Engineering from Pakistan and h...

Misco Jobs

Resume #71931

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
\TO WORK IN A DYNAMIC AND CHALLENGING ENVIRONMENT WHERE I CAN PERFORM MY SKILLS AND KNOWLEDGE FOR THE BETTERMENT OF THE PROJECT.

POST APPLIED FOR: Process Design Engineer

ACADEMIC RECORD:
B.Sc. Chemical Engineering ICET, University of the Punjab
(2001-2005) Final Professional Result, 1st Annual Examination 2005 %age Obtained: 74.58
B.Com. University of the Punjab
(1999-2001) Punjab College of Commerce, Lahore %age Obtained: 69.15

WORK EXPERIENCE

CAREER MAJOR HIGHLIGHTS

1. I have an experience of almost 3 years of process engineering on fertilizer plants and have worked on ammonia, urea and utilities.

2. I have visited Japan for almost 2 months for Verification of Basic Engineering Documents of Urea Plant and attended meetings with Stamicarbon (Urea Plant licensor) and the contractor.

3. I have attended Urea coordination meeting at Netherlands with our engineering contractor and Urea Plant licensor.

4. Has obtained the training of Aspen Plus 2006.6 and Aspen TASC+ 2006.5 provided by Aspen Tech Partners.

Current Experience:

I'm currently working as a Process Engineer in Fatima Fertilizer Company Limited (initially was on Ammonia Plant) since September, 2006. Following are the lists of projects I have completed during my job:

AMMONIA PLANT (Sep 2006 – Jan 2007)
* Has reviewed the Process Flow Diagram of Ammonia Plant (Kellogg Design).
* Presentation on UOP Benfield and Eickmeyer Catacarb System.
* Has studied the Kellogg, UK Relocation Study Report.
* Has studied the Parrish Process Report.
* Has done the Cooling Water and Steam Balance of ammonia plant.
* Exchanger simulations of relocated exchangers such as Air Cooler, Ammonia Converter effluent cooler, Synthesis Gas Compressor Intercooler and CO2 product cooler.
UTILITIES (Feb 2007 –Feb 2007)
* Has worked on the economies of the chemicals used in Demineralization Plant.
* Has reviewed the documentation on the Reverse Osmosis Plant.
* Correspondences with various vendors.
UREA (Mar 2007 – Till Now)
* Has visited Japan for Basic Engineering of Urea Plant.
* Has reviewed the Cause and Effect Matrix of Urea Plant.
* Sizing of CO2 Compressor
* Vendor P&ID's of CO2 Compressor, HP Ammonia and Carbamate Pump
* Has been involved in Hazop Study of Urea Plant with the Stamicarbon (licensor).
* Has reviewed the equipment data sheets of Urea Plant.
* Has reviewed the machinery data sheets of Urea Plant.
* Has reviewed the Piping and Instrumentation of Urea (Stamicarbon Technology).
* Has reviewed the Piping Layout and Plot Plan of Urea.
* Has reviewed the Prill tower design and its related accessories.
* Has reviewed the Instruments Data Sheets (Control Valves, Flow meters, Analyzers etc)
* Has reviewed the DCS Configuration of Urea Plant
* Has participated in the Kick off Meetings with the licensor/ Contractor for Basic Engineering of Urea Plant
* Has reviewed the MOS/ POS of Urea Plant
* Has participated in other activities of Urea Plant such as Erection activities monitoring, preparation of Lay Down Area, Civil Structure Design, Plant Layout, Prill Tower Elevator, Steel Structure and color coding
ERECTION ACTIVITIES
* Has supervised the civil construction jobs of main melt structure and pipe rack
* Has supervised the piling activities of Prill Tower and other columns
* Layout for storage area
* Has participated in the Daily Construction Meeting and discussion of weekly construction plans.
* Other miscellaneous activities regarding review of vendor drawings, concrete outline drawings etc.

Previous Experiences:

1. Worked as a Process Design Engineer of Utility Boiler and Heat Exchangers in Descon Manufacturing Business area from July 19th, 2007 to September 22nd, 2007.

2. Worked as a BMR process engineer (NH3 plant) at Fauji Fertilizer Bin Qasim Limited, Karachi (25th April 2005-24th April 2006). Following are the lists of projects I have completed during my training:

PROCESS DESIGN:

1. Piping Design:
* Calculation of Pressure Drops across the piping of ammonia lines, water lines and process gas lines.
* Sizing of process gas, water and steam condensate lines using different piping criteria's.
* Selection of piping materials using API-941.

2. Process Simulation:
* Process simulation of ammonia plant.
* Process Simulation of Ammonia Storage Loop.
* Modifications in the P &ID's of ammonia plant.

PROJECTS ON HEAT EXCHANGERS:
* Process package of Methanator Trim Heater.
* Process Package of Methanator Effluent exchangers.
* Process Package of Synthesis Gas Chiller.
* Process Package of Converter Effluent Exchangers.
* Manual Thermal Design of Boiler Feed Water Heater.
* Manual Thermal Design of Ammonia Vaporizer.
* Pressure Drop calculations across the exchanger.
* Selection of heat exchanger materials using API-941.
* HAZOP Analysis of different exchangers for different services.
* Sizing of knock out drums.
* Studied GA drawings for different exchangers.

PROJECTS ON MACHINERY:
* Process Package of Air Compressor.
* Studied the Centrifugal Compressor Performance Curves
* Process Package of Turbine Driven Cooling Water Pump.
* Pressure Drop Calculations for the air compressor train.
* Centrifugal compressor sizing.
* Centrifugal Pump sizing.
* Antisurge Control Loop of Ammonia Refrigeration Compressor.
* Desuperheater calculations for the liquid ammonia injection nozzle.
* Calculation of NPSH for a centrifugal pump.
* Line sizing for steam turbine.
* Power requirement calculations for centrifugal compressors / Sizing of centrifugal compressors.
* Power requirement calculations for centrifugal pump / Sizing of centrifugal pump.
* Power requirement calculations for steam turbine / Sizing of turbine.

PROJECTS ON INSTRUMENTATION:
* Sizing of a PSV (spring operated and pilot operated) and development of specification sheet.
* Studied API-520 for PSV sizing.
* Sizing of different control valves and development of specification sheet.
* Flow meters sizing and development of specification sheet.
* Rupture Disc Sizing.
* Development of Pressure and Temperature gauges specification

PROJECTS ON OTHER EQUIPMENTS:
* Evaluating Benfield system of ammonia plant.
* Report on cooling water requirement for the revamp case.
* Correspondences with various Vendor Companies for BMR Projects.

TA-2006 ACTIVITIES:
* Have supervised the Catalyst unloading, loading and reduction activities of:
o Primary Reformer o Ammonia Converter o And Desulfurizor Beds.
* Have been involved in measuring reformer tubes differential pressure using a dP Guage.
* Have supervised the unloading, washing and loading of pall rings in the Ammonia Absorber.
* Have observed the waste heat boiler rigging activities, furnace (primary reformer) tube replacement & HP-Jetting of Heat Exchangers.
* Have been involved in the Waste Heat Boiler boiling and drying out activity.

SHUT DOWN-2005 ACTIVITIES:
* Have supervised the Catalyst loading, unloading and reduction activities of:
o Low Temperature Shift Converter o Primary Reformer, o And Desulfurizor Beds during shut down.

SAFETY TRAINING:
* Has participated in the BMR weekly safety talks
* Has been involved in the Safety Training Program by the Safety department

PRESENTATION:
* Have been involved in the final presentation on Centrifugal Compressor.

Industrial Training:

One month training experience at Pak Arab Fertilizer Corporation, Multan. Work on the ammonia plant.

Engineering Software's Skills:

* HTRI Xchanger Suite 4.0
* Aspen Plus 2006.5, 11.1
* Aspen TASC+ 2006.5
* HYSYS 1.1, HYSYS 2.2, HYSYS 3.2 (Process Simulation)
* Aspen Hysys 2004
* Aspen HTFS (Thermal Design)
* PRO-II (Process Simulation)
* CHEMCAD 513 (Process Simulation Software)
* CTI cooling water tool kit (cooling tower performance)
* Winsim
* Fluid Flow
* SINET 7.0
* AUTOCAD 2000
* KED (Boiler Design Software)
* Microsoft VISIO
* Microsoft Visual Basic
* First Vue, Valspeq, Masoneilan Quick Size, PROS (control valve sizing)
* Tyco Safety Size 2002, SRVS (safety relief valve sizing software)
* Rupture Disc Sizing Software
* Steam Trap Sizing Software

Projects:

* A Plant Design Thesis on the manufacturing of Benzene from Hydrodealkylation of Toluene.
* A Process Report on the Preparation of water based flexographic printing ink.

SHORT COURSES

* Course on Presentation Skills Improvement from FFBL.
* Course on Presentation Skills from Pak Arab Fertilizer Ltd.
* Course on Web and Graphic Designing from Department of Mathematics, University of the Punjab, Lahore.
* Course of AUTOCAD (2000) from Institute of Chemical Engineering and Technology, University of the Punjab.
* Participated in the seminar of TYCO Valves.

COMPUTER SKILLS

Well known with the Microsoft Visio, MS-Excel, MS-Word, MS-Outlook, Internet Explorer, Visual Basic, and MS-Power Point. I am well versed in computer operating, English composing, Internet (Browsing E-mail and Searching etc).

EXTRA CURRICULAR ACTIVITIES

Avocations:

Reading books, body building, snooker, table tennis, cricket, internet surfing, listening music, watching movies and writing poetry.

Achievement:

I have been awarded as one of the world's top ten amateur poets by the www.poetry.com.

LANGUAGES I SPEAK

* English
* Urdu

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2701 to 2750 of 6558)

Go to Search Parameters...

Brief Description

Sr. Drilling engineer - 8 years working experience - MS in Petroleum engineer - - Industrial engineer degree -

Production Technologist with 11+ years experience, expert in Field Development Planning/Implementation), Well Designs, Drilling/Workover, Productivity Enhancements-simulation/Water Shut-off etc., Production Optimization, Well Surveillance, Sand Prediction/Control, Artificial Lift etc.

Operate as part of a team of engineers in carrying out detailed engineering works and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

Process modelling using "ASPEN HYSYS" & PIPING ENGINEERING COURSE

ELECTRICAL TECHNOLOGIST/SUPERVISOR with proven leadership skills, vast experience in the chemical, Power and Research and Development industry. Worked for WATER AND POWER DEVELOPMENT AUTHORITY, ENGRO CHEMICALS PAKISTAN LTD AND SUPARCO. Examples of the plants and situations I have handled include, P

Seeking a petroleum engineering position where I can apply my analytical skills as part of a multidiscipline team to yield results and grow

Mechanical Design Engineer

Engineer with a scientific base, high analysis capacity, and development of projects guided to the exploration, drilling and development of oil fields in order to exploit our resources

HSE officer + + 3 Yr Exp. + B.E. + DIS, Work experience in Emergency Handling at various occupancies, Chemical Plant safety, Petrochemical Fire & safety, Plant Construction project, Natural Gas Pipeline Project & O&M Health safety Environment expertise Experience.

2001 to 2004 working at Smiti International Gulf Services (OMAN) as a Drilling Tubullars Inspector. 2004 - Cuurently working at MB Petroleum Servics as Completion Field supervisor

Process Design Engineer with 3 yrs exp.Basically a BTech Petrochemical Engineer,versed with Aspen Hysys,Flarenet,Aspen Plus,Process calculation worked for International FEED & Detailed Engineering projects

My objective is to become an employee who is committed to contributing to professional/career excellence. Being an individual who is given to continuous learning and development, I am always willing to harness from my skill pool, experience, and specialized area of training; to be the best I can

Instrument&control engineer (DCS,PLC) oil & gas field

HSE advisor, also experienced as a Chief/ Safety/ Helicopter Landing Officer in organization Site Safety Procedures and practices, overseeing the construction and production of the large Storage tankers, FSO, MOPU

21 Yr Exp Power Electronics - Electrical Engineer, Large Variable Speed Drives & Motors, Automation

Electronic Engineer

Entry level Process Engineer,BS and MS Chemical Engineer

A full time opportunity as an Aerospace Engineer to utilize my extensive skills in Management, Design, Manufacturing, CAD/CAE/CAM tools and Computer Programming.

BSc.(Engineering) and PGD (Engineering) in Petroleum Engineering - 2 Year experience and hand in Reservoir Simulations

11 years covered in Oil and Gas Plants Instructed as an Instrument technician with theoretical knowledge and practicing on equipments for measurement and control systems from electrical to pneumatic or hydraulic circuits. Worked for big companies: AGIP & SONATRACH (from commissioning to start up)

FEA ANALYSIS, HYDRAULICS DESIGN, MECHANISM DESIGN, MEDICAL DEVICE DESIGN

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

Pre-commissioning Engineer

Graduate engineer with specialization in metallurgical engineering and professional experience as welding engineer in the fabrication field for the past 10+ years. CEng MIOMMM MWeldI, ASQ-CQE, API 510 pressure vessel inpsector, CSWIP Senior Inspector

03 years Diploma of Associate Engineer in Electronics Technology. + 02 Years Apprenticeship in Electrical Technology from POFs IT Wah Cantt. + High School Certificate (Science Group)1st Division - Total 08 years Professional Experience

Proficiency in Process simulation on HYSYS. Proficiency in Gas pipeline simulation with TGnet, TLnet. Proficiency in application software such as MS-Office, MS-Access. Basic Exposure of HTFS.

i have B. ENG in Chemical Engineering with Second Class, Proficient in the use of Microsoft applications: word, Excel, and Core draw, MySQL, Oracle, and others. CAREER OBJECTIVE:To work assiduously towards the accomplishment of a challenging and reputable organization thereby attaining a higher lev

Am M.H.Abdul Mujeeb, Bachelor of engineering holder working as a Mechanical(Field) Engineer in Anabeeb Arabian Pipeline and Services Co Ltd,Al-Jubail,KSA.My responsibilities are to handle Heatexchangers,Vessels,Coloumns and also Reformer.And also to prepare doucumentation for the projects.

application for the post of safety engineer/ safety officer having an experience of 6 years and 7 months of which 2years and 7 months in kuwait approved as a safety officer from koc kuwait and approved as a safety supervisor from knpc kuwait

I am post graduated from I.I.T roorkee and have 3 yr experience in oil and gas consultancy(offshore) after post graduation. I have sound knowledge of SACS, STAAD softwares

Lead Quality Engineer / Inspection Engineer / Welding Engineer

I am a Chemistry graduate having fifteen years experience from petorchemical and ammonia plants. At present I am working as a shift chemist in Saudi International Petrochemical Company. Previously I was worked in Madras Fertilizers Ltd as Senior Lab Analyst. Kindly consider my resume.

Experienced in analytical techniques in hydrology/hydrogeology. Expert in modeling of ground/surface water using a variety of software. Skilled at managing moderate teams through planning, execution and report writing. Excellent written and verbal communication skills.

Engineer PhD + 8 years experience in fluid flow and flow assurance including research and development with paraffin deposition problems. Extensive experience with modeling and analysis of multiphase flow problems.

Sr. instrumentation engineer with 11yrs of exp in the commissioning, startup and maintenance of petrochemicals and refinery.

I am a 39 year old South African Male seeking employment in the Petrolium/Oil/Gas Field. I am a qualified Fitter & Turner with relevant experience.

9 yrs experience in process engineering for Refinery, Natural Gas, Petrochemicals areas, worked on FED,DD projects; de-bottlenecking studies & residual engineering work. techniques of hazard analysis & HAZOP studies. used process simulation software ChemCAD 3.0, HYSIS,PipeSim & Pipephase

Working on campus at Texas A&M University–Kingsville has provided me with a variety of skills and talents. I also have an extensive knowledge of a variety of computer applications. I am always interested and open to further training & I am willing to relocate.

QC Geophysicist for 2D Seismic Reflection data acquisition. Geophysicist for data acquisition processing & interpretation of Seismic Refraction. Resistivity data acquisition processing and interpretation for water investigation Familiar with computer packages

Included in body & contact information.

hydraulic technician/fitter

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

I am looking for a job in the petroleum industry. I have a B.S. degree in petroleum engineering. I have over 11 years of experience and training related to petroleum engineering. Most of my experience was as a mudlogger. I am very interested in an office position relating to formation evaluation.

Looking for Field Engineering position.

My first 5 years of experience covers TURN KEY Project Management / Estimation / Execution-Supervision / Installation, Water Trials, Commissioning, Maintenance, Trouble Shooting, etc. & last 7 years in Piping Design & Eng.

QA/QC Engineer / inspector -piping or structural, b.sc engineering

GRADUATE PETROLUEM ENGINEER SEEKING JOB OPPORTUNITIES IN THE UPSTREAM OIL AND GAS SECTOR

I have completed Four Year Batchelor of Chemical Engineering from Pakistan and have 3 years of fertilizer industry experience related to basic and detailed engineering design of ammonia and urea plants.

Experienced in the CAD programs:PDS 8.0 (3 Months)

GOOD USER OF SOFTWARES LIKE PDS, MICROSTATION,MICROSOFT OFFICE , AND GOOD TEAM WORKER

First Prev 51 52 53 54 [ 55 ] 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out