Resume - QA/QC Engineer / inspector -piping or structural, b.sc engineering

Misco Jobs

Resume #71935

CONTACT INFORMATION:
View contact information...

SEX MALE
DATE OF BIRTH 17th MARCH 1977.
MARITAL STATUS SINGLE.
PLACE OF BIRTH UMUOKWOR VILLAGE, OZA,ASA.

EDUCATION AND QUALIFICATIONS
Auto – CAD Drafting and Designs, Presco computer Institute, Calabar.( 2006 )

Bachelor of Engineering, Metallurgical and Materials Engineering, Enugu State University of Science and Technology, Enugu State. (1998 – 2002)

Senior Secondary School Certificate Examination, National High School, Aba, Abia State (1989 – 1994).

First School Leaving Certificate, State School I Sangana Street, Mile I Diobu, Port Harcourt, Rivers State.

SYNOPSIS OF PROFESSIONAL EXPERIENCE
Deputy supervisor Engineering and maintenance Department, Asaba Aluminium company limited, Asaba, Delta state. (NYSC March 2003-feb 2004).
Maintenance Engineer, Ikenga oil limited,Umuokwor,( Sept 2004- jan 2005)
Construction and QA/QC manager, Brown Rocks Nigeria limited. ( 2005-till date)

PROJECT TYPE

Project: Decks integration for Adanga North B platform.
Duration: March 2008- till Date
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria limited, Calabar.
Position: Contractor's Construction and QA/QC Manager.
Task: Quality management on construction Activities. As – Built packages / close out Documentation, Co-ordination of NDT Examination and collation of quality and construction report from field inspectors.

PROJECT TYPE
Project: piping pre-fabrication for Adanga North B platform.
Duration: feb 2008- till Date
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria limited, Calabar.
Position: Contractor's Construction and QA/QC Manager.
Task: Quality management on construction Activities. As – Built packages / close out Documentation, Co-ordination of NDT Examination and collation of quality and construction report from field inspectors and co-ordination of hydrostatics test etc.
PROJECT TYPE
Project: Deck fabrication for Adanga North B platform.
Duration: Oct 2007-march 2008
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria limited, Calabar.
Position: Contractor's Construction and QA/QC Manager.
Task: Quality management on construction Activities. As – Built packages / close out Documentation, Co-ordination of NDT Examination and collation of quality and construction report from field inspectors

PROJECT TYPE
Project: Oron west-south wellhead platform piping pre-fabrication.
Duration: march 2007-feb 2008
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria limited, Calabar.
Position: Contractor's Construction and QA/QC Manager.
Task: Quality management on construction Activities. As – Built packages / close out Documentation, Co-ordination of NDT Examination and collation of quality and construction report from field inspectors and co-ordination of hydrostatics test etc

PROJECT TYPE
Project: OML 123 Integrated facility upgrade project(Fabrication of 14'',12'', 10''ánd
8'', Risers and spools for ORWS and ADSI Platforms.
Duration: Feb 2007-August 2007
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria limited, Calabar.
Position: Contractor's Construction and QA/QC Manager.
Task: Quality management on construction Activities. As – Built packages / close out Documentation, Co-ordination of NDT Examination and collation of quality and construction report from field inspectors and co-ordination of hydrostatics test etc

PROJECT TYPE
Project: Tie in New 3'' and 2'' flow line and Gas lift for Ebughu well 12.
Duration: January 2007
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria limited, Calabar.
Position: Contractor's Construction and QA/QC Manager.
Task: Quality management on construction Activities. As – Built packages / close out Documentation, Co-ordination of NDT Examination and collation of quality and construction report from field inspectors and co-ordination of hydrostatics test etc

Project: Tie in New 3" and 2'' flowline and Gaslift for Adanga well 17 and 19
Duration: November 2006
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria limited, Calabar.
Position: Contractor's Construction and QA/QC Manager.
Task: Quality management on construction Activities. As – Built packages / close out Documentation, Co-ordination of NDT Examination and collation of quality and construction report from field inspectors and co-ordination of hydrostatics test etc

Project: OML 123 FPSO vessel changeout 2006
Duration: september 2006
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria limited, Calabar.
Position: Contractor's Construction Engineer, QA/QC Engineer / HSE Officer.
Task: Weld inspections and Quality management on construction
Activities. Assist in As – Built packages / close out Documentation/
supervision of NDT personnel / Conducting of tool Box meeting/
supervision of hydrostatics test and Assuring Project safety Management.

Project: Tie in New 14" Production Line From ORON Platform at ADRP – 1 Platform.
Duration: July – August 2006
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria limited, Calabar.
Position: Contractor's Construction Engineer, QA/QC Engineer / HSE Officer.
Task: Weld inspections and Quality management on construction
Activities. Assist in As – Built packages / close out Documentation/
Supervision of NDT personnel / Conducting of tool Box meeting/
Supervision of hydrostatics test and Assuring Project safe Management

Project: Halliburton Cement Bulk Tank Upgrade and piping
Duration: June 2006
Company: Halliburton Energy Services (Addax Logistics Base, Calabar)
Contactor: Brown Rocks Nigeria Limited, Calabar
Position: Contractor's Construction Engineer, QA/QC Engineer / HSE Officer.
Task: Weld inspections and Quality management on construction
Activities. Assist in As – Built packages / close out Documentation/
Supervision of NDT personnel / Conducting of tool Box meeting and Assuring
Project safe Management

Project: Baker Huges Base Oil / Mud Tank Farm upgrade and Piping.
Duration: May 2006
Company: Baker Hughes Inteq. (Addax Logistics Base, Calabar)
Contractor: Brown Rocks Nigeria Limited, Calabar.
Position: Contractor's Construction Engineer, QA/QC Engineer / HSE Officer.
Task: Weld inspections and Quality management on construction
Activities. Assist in As – Built packages / close out Documentation/
Supervision of NDT personnel / Conducting of tool Box meeting and Assuring
Project safe Management

Project: Mimbo Platform 6HT Flow line Repairs and Fabrications.
Duration: April 2006.
Company: Addax Petroleum Development Nigeria Limited
Contractor: Brown Rocks Nigeria Limited, Calabar.
Position: Contractor's Construction Engineer, QA/QC Engineer / HSE Officer.
Task: Weld inspections and Quality management on construction
Activities. Assist in As – Built packages / close out Documentation/
Supervision of NDT personnel / Conducting of tool Box meeting and Assuring
Project safe Management.

Project: Addax Logistic Base Jetty Caisson 'O', 'J' and 'F' Clamp Fabrications and Installations.
Duration: Nov 2005 Till Date.
Company: Addax Petroleum Development Nigeria Limited
Contractor: Brown Rocks Nigeria Limited, calabar.
Position: Contractor's Construction Engineer, QA/QC Engineer / HSE Officer.
Task: Weld inspections and Quality management on construction
Activities. Assist in As – Built packages / close out Documentation/
Supervision of NDT personnel / Conducting of tool Box meeting and Assuring
Project safe Management

Project: Adanga North (EWT) platform Hook-up and Piping.(Offshore Hook-up)
Duration: Jan 2006 – march 2006.
Company: Addax Petroleum Development Nigeria Limited
Contractor: Brown Rocks Nigeria Limited, Calabar.
Position: Contractor's Construction Engineer, QA/QC Engineer / HSE Officer.
Task: Weld inspections and Quality management on construction
Activities. Assist in As – Built packages / close out Documentation/
Supervision of NDT personnel / Conducting of tool Box meeting/
Supervision of hydrostatics test and Assuring Project safe Management

Project: Adanga North platform Structural Fabrication and Installation.(offshore)
Duration: Nov 2005 – Dec 2005.
Company: Addax petroleum Development Nigeria Limited.
Contractor: Brown Rocks Nigeria Limited, Calabar.
Position: Contractor's Construction Engineer, QA/QC Engineer / HSE Officer.
Task: Weld inspections and Quality management on construction
Activities. Assist in As – Built packages / close out Documentation/
Supervision of NDT personnel / Conducting of tool Box meeting and Assuring
Project safe Management

Project: Akam Platform De – Bottlenecking and Metering By-Pass / Deck
Extension and Oron Platform well Head Upgrade and piping.
Duration: August - September 2005.

Company: Addax Petroleum Development Nigeria Limited.

Contractor: Brown Rocks Nigeria Limited, Calabar.

Position: Contractor's Construction Engineer, QA/QC Engineer / HSE Officer.
Task: Weld inspections and Quality management on construction
Activities. Assist in As – Built packages / close out Documentation/
Supervision of NDT personnel / Conducting of tool Box meeting/
Supervision of hydrostatics test and Assuring Project safe Management

HOBBIES: Hard work, Reading and Travelling.

REFEREES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2701 to 2750 of 6411)

Go to Search Parameters...

Brief Description

My objective is to become an employee who is committed to contributing to professional/career excellence. Being an individual who is given to continuous learning and development, I am always willing to harness from my skill pool, experience, and specialized area of training; to be the best I can

Instrument&control engineer (DCS,PLC) oil & gas field

HSE advisor, also experienced as a Chief/ Safety/ Helicopter Landing Officer in organization Site Safety Procedures and practices, overseeing the construction and production of the large Storage tankers, FSO, MOPU

A dedicated professional with excellent technical, management and inspection skills. I maintain strong supervision, training and motivation abilities. Acknowledged as a dynamic performer with a high level of initiative and commitment to quality. A team player with superb communication skills.

Electronic Engineer

Entry level Process Engineer,BS and MS Chemical Engineer

A full time opportunity as an Aerospace Engineer to utilize my extensive skills in Management, Design, Manufacturing, CAD/CAE/CAM tools and Computer Programming.

11 years covered in Oil and Gas Plants Instructed as an Instrument technician with theoretical knowledge and practicing on equipments for measurement and control systems from electrical to pneumatic or hydraulic circuits. Worked for big companies: AGIP & SONATRACH (from commissioning to start up)

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

Pre-commissioning Engineer

Graduate engineer with specialization in metallurgical engineering and professional experience as welding engineer in the fabrication field for the past 10+ years. CEng MIOMMM MWeldI, ASQ-CQE, API 510 pressure vessel inpsector, CSWIP Senior Inspector

Senior level position with EPC company executing large scale infrastructure and industrial projects, where a strong background in contracts, project controls, engineering, and effective communication skills, and a complete knowledge of project management can be used to improve project

Worked 08 wells till completion

Planning Engineer with a vast knowledge of Industrial Engineering, self motivated totally reliable and ambitious, computer literate and willing to further my education to enhance my career in the field of planning

03 years Diploma of Associate Engineer in Electronics Technology. + 02 Years Apprenticeship in Electrical Technology from POFs IT Wah Cantt. + High School Certificate (Science Group)1st Division - Total 08 years Professional Experience

Proficiency in Process simulation on HYSYS. Proficiency in Gas pipeline simulation with TGnet, TLnet. Proficiency in application software such as MS-Office, MS-Access. Basic Exposure of HTFS.

Am M.H.Abdul Mujeeb, Bachelor of engineering holder working as a Mechanical(Field) Engineer in Anabeeb Arabian Pipeline and Services Co Ltd,Al-Jubail,KSA.My responsibilities are to handle Heatexchangers,Vessels,Coloumns and also Reformer.And also to prepare doucumentation for the projects.

application for the post of safety engineer/ safety officer having an experience of 6 years and 7 months of which 2years and 7 months in kuwait approved as a safety officer from koc kuwait and approved as a safety supervisor from knpc kuwait

I am post graduated from I.I.T roorkee and have 3 yr experience in oil and gas consultancy(offshore) after post graduation. I have sound knowledge of SACS, STAAD softwares

Lead Quality Engineer / Inspection Engineer / Welding Engineer

I am a Chemistry graduate having fifteen years experience from petorchemical and ammonia plants. At present I am working as a shift chemist in Saudi International Petrochemical Company. Previously I was worked in Madras Fertilizers Ltd as Senior Lab Analyst. Kindly consider my resume.

Experienced in analytical techniques in hydrology/hydrogeology. Expert in modeling of ground/surface water using a variety of software. Skilled at managing moderate teams through planning, execution and report writing. Excellent written and verbal communication skills.

Engineer PhD + 8 years experience in fluid flow and flow assurance including research and development with paraffin deposition problems. Extensive experience with modeling and analysis of multiphase flow problems.

Sr. instrumentation engineer with 11yrs of exp in the commissioning, startup and maintenance of petrochemicals and refinery.

I am a 39 year old South African Male seeking employment in the Petrolium/Oil/Gas Field. I am a qualified Fitter & Turner with relevant experience.

9 yrs experience in process engineering for Refinery, Natural Gas, Petrochemicals areas, worked on FED,DD projects; de-bottlenecking studies & residual engineering work. techniques of hazard analysis & HAZOP studies. used process simulation software ChemCAD 3.0, HYSIS,PipeSim & Pipephase

Working on campus at Texas A&M University–Kingsville has provided me with a variety of skills and talents. I also have an extensive knowledge of a variety of computer applications. I am always interested and open to further training & I am willing to relocate.

QC Geophysicist for 2D Seismic Reflection data acquisition. Geophysicist for data acquisition processing & interpretation of Seismic Refraction. Resistivity data acquisition processing and interpretation for water investigation Familiar with computer packages

Included in body & contact information.

hydraulic technician/fitter

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

I am looking for a job in the petroleum industry. I have a B.S. degree in petroleum engineering. I have over 11 years of experience and training related to petroleum engineering. Most of my experience was as a mudlogger. I am very interested in an office position relating to formation evaluation.

Looking for Field Engineering position.

My first 5 years of experience covers TURN KEY Project Management / Estimation / Execution-Supervision / Installation, Water Trials, Commissioning, Maintenance, Trouble Shooting, etc. & last 7 years in Piping Design & Eng.

QA/QC Engineer / inspector -piping or structural, b.sc engineering

GRADUATE PETROLUEM ENGINEER SEEKING JOB OPPORTUNITIES IN THE UPSTREAM OIL AND GAS SECTOR

I have completed Four Year Batchelor of Chemical Engineering from Pakistan and have 3 years of fertilizer industry experience related to basic and detailed engineering design of ammonia and urea plants.

Experienced in the CAD programs:PDS 8.0 (3 Months)

GOOD USER OF SOFTWARES LIKE PDS, MICROSTATION,MICROSOFT OFFICE , AND GOOD TEAM WORKER

Proficient in AutoCAD, Allen Bradley PLC, HART Communication Protocol (Rosemount, Foxboro, Yokogawa, Honeywell, and Endress+Hauser)

7 years experiense in Kazakhstan

Automation Engineer- PLC ,SCADA programming and Electrical Engineering

Electrical Mainteance & Repairs HND Elecct/Elect, City&Guilds Level 4 London (HNC/B.TECH.)

Mud engineer, drilling fluid engineer,computer skill, etc...

My career objective has always been to contribute my education and engineering skills within a growing and dynamic organization.

Bachelor Degree in Metallurgical and Materials Engineer in Brazil. I have 2 years experience working with quality inspection in a maintenance Company for Oil/Gas Industry, also 4 years of experience in laboratory on materials testing and characterization.

25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants

Total 6½ of years experience in the field of power plant and GOC in various projects. Preparation of GA and preliminary piping layout with Design principles, creation and review of P&ID’s, Review of vendor information, review of contracts with respect to system description, highly proficient using I

Automation Engineer, I have worked in different company for electronic devices and actually in Oil and Gas field us an engineer automation for DCS and Safety syetems, for more details Plaise see my CV here.

I am looking job in instrumentation field as instrument SUPERVISOR/INSPECTOR/SR.TECH

First Prev 51 52 53 54 [ 55 ] 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out