Resume - 6 years experience in the field of Mechanical, Piping Engineering Design / Draft...

Misco Jobs

Resume #71941

CONTACT INFORMATION:
View contact information...

D.O.B - 28 / 12 / 1973
Marital Status – Married
Linguistic Repertoire -Tamil (Mother tongue), English

- Diploma in Mechanical Engineering (April 1993)
VSVN Polytechnic, Virudhunagar, India
Attained an aggregate of 82.0 %

- Post Diploma in Metallurgy (August 1997)
Central Polytechnic, Chennai, India
Attained an aggregate of 61.0%

Certificate Courses Done:
- AutoCAD

- C-language

Computer software handled:

- PDMS v11.5 (Plant Design Management System)

- AutoCAD 2008 & CADWORKS.

- Navis Works Jet stream V5.0 (Model Review)

- Micro station V8

- MS-EXCEL & MS-WORD.

Familiar with ASME B31.3, also worked on API and SHELL DEP Standards.

Duties & Responsibilities (Design / Drafting):

- Process piping design, Utility piping and pipe rack arrangement.
- Preparation of Piping Layout, piping arrangement and equipment sections and piping details...
- Piping support detailing.
- Preparation of piping isometrics and piping spools for fabrication with BOM.
- Preparation of Bulk MTO for valves & special items.
- Check all detail design drawings before submitting for approval.
- Drafting of as built drawing for Pressure Vessels, Distillation Column
And its sub- assemblies.
- Co-ordination with other faculties like civil, electrical, instrumentation, telecom department etc..

Work Experience:
Organization: PETROFAC INTERNATIONAL LIMITED,
An EPC Contractor, Muscat, Oman.
Designation: Piping Designer – Senior Staff
Duration: 2nd June 2007 – till now.
Software used: PDMS(Equipment, Piping & Draft Module), ACAD 2008,
CAD Works & Navisworks Jet stream.
Projects involved: Harweel cluster phase-II, Gas & Oil Separation Unit.
Project value: US $ 1.6 billion.

Organization: FLSMIDTH PRIVATE LIMITED (A Danish company)
EPC Contractor, Chennai, India.
Designation: ENGINEER – Grade II
Duration: 15th May 2006 – 24th May 2007.
Software used: AutoCAD Mechanical 2004, Solid Works 2005.
Projects involved: St. Geneve-USA,
Keystone- USA.
Organization: M/s. KERY DRYING & CONVEYING SYSTEMS PVT. LTD.,
Chennai, India.
Designation: Designer-Piping
Duration: 16th May 2003 – 13th May 2006.
Software used: AutoCAD 2004 & PDMS (Equipment & Piping Module)
Projects involved: TISCO (India) & Vizag Steel Plant (India)

Organization: M/s. SICGIL INDIA LIMITED, Manali, India.
Designation: Shift Engineer.
Duration: Design Department: 1st January 2002 to 15th May 2003.
O & M Department: 1st April 1996 – 31st December 2001.
Software used: AutoCAD 2000 & Microstation.
Projects involved: Co2 Plant Design/Drafting of 6 units of the company in Manali,
Goa (India), Tuticorin (India), Bangalore (India), Vizag (India)
And Baroda (India). Job involves draft P & I diagram, Plant Layout, Key plan for approval in Inspector of Factories.
Duties & Responsibilities (O & M):
- Execution of Projects like pressure vessel and pipe laying work, modification in piping, erection of driers and heat exchangers with hot and cold insulations.
- Monitor the Plant parameters of Carbon dioxide liquefaction plant (75 Tons/day / Bottling plant (15 Tons/day) and make entries in the log sheet.
- O& M of Refrigeration plant (NH3 & Freon).
- O & M of utilities like compressor (Vapor and Refrigeration), Centrifugal pumps, Gear Pumps, Piston Pumps, Blowers and Cooling towers (150 TR & 80 TR)
- Observes and maintaining the following for smooth operation of plant are: Filters, Dryer Unit, Pressure Vessels, Heat Exchangers and all type of valves.
- Monitoring calibration validity and certificate for all the measuring equipment (Pressure gauge, temperature gauge, Safety valves, Weighing Scales etc.)
- Forward planning and timely execution of Scheduled Maintenance.
- Conduct Chemical Tests to evaluate the quality of gas using Gas Chromatography

Organization: M/s. ADDISON & CO, Chennai, India.
Designation: Technician Apprentice.
Duration: 22nd January 1995 – 21 January 1996.
Role & Responsibility: QC Inspector for Floor and Shop Inspection of cutting tools.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 6997)

Go to Search Parameters...

Brief Description

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

A well rounded drilling personnel with a unique experience in drilling and completion / work over operations

Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.

Quantity Surveyor/Estimator (Mechanical)

All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.

Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction

Primavera , MS Project

A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.

Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.

i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.

I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.

ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.

I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures

Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.

7 years experience in Mechanical maintenance

- Good at English and drilling software.

16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).

GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS

Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.

Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).

An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.

HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date

Oil and gas mechanical technician

I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.

Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.

See resume

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

Sr. Drilling & Completion Consultant

Chemical Engineer with 15+ years experience in upstream oil/ gas exploration & production industry. Experienced in equipment sizing, hazards and effects process tools application (i.e. HAZID, HAZOP, JHA etc.), process simulations, process optimization, feasibility studies, concept identification,etc

Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

Electrical Power Management and Control System, Offshore Electrical and Instrumentation Control System, LV, MV and HV power distribution, VFD, GE Multilin protection relays,DCS (Emerson DeltaV), PLC (Allen Bradley, GE Fanuc, Omron), SCADA (Citect) systems, Safety Instrumented System (HIMA), system.

Plant and DCS operator

I am interested in exploring the possibility of employment through your Organization. My background includes experience of over two years as a Trainee Mud Engineer on offshore platform in Petrobaltic S.A.

GIS Specialist

I am a Mechanical Engineer with over 20 years of oilfield experience in Drilling, Well Intervention, Cementing and downhole tools

B.E. Mechanical engineer with 6 years experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out