Resume - Analyzer Technician

Misco Jobs

Resume #72064

CONTACT INFORMATION:
View contact information...

Date of birth: January 28, 1982
Place of birth: Batangas City
Gender: Male
Civil Status: Single
Nationality: Filipino
Religion: Roman Catholic
Height: 5'5"
Weight: 52kg

B. EMPLOYMENT RECORD:

Employer: I&E INDUSTRIAL SYSTEM SERVICES, INC.
#788 Libjo, Takad Batangas City
Philippines 4200

Date Employed: August 08, 2001-Present

Current Position: Site Supervisor (November 2006 – Present)
Analyzer Technician (June 2002 – November 2006)

Served Client at Present: PETRON BATAAN REFINERY
Bo. Lamao, Limay Bataan
Philippines

Contract: Maintenance of On-line Process Analyzer and Gas Detectors
Maintenance of Laboratory Instruments

Inclusive Date: June 03, 2002 – Present

Duties and Responsibilities:

* Represents the company on meetings and other engagements.
* Directly reports to the General Manager and proposes appropriate recommendation.
* Conducts site visits and assess work progress.
* Prepares accomplishment report for clients.
* Prepares cost estimates for prospective projects.
* Assign, schedule and check work procedures.
* Conducts daily briefing of technicians.
* Carry on any tasks required by the immediate supervisor.
* Supervision of other projects at Petron.

Other related skills (Analyzer Technician):

* Conducts Routine, periodic, or special inspections to determine repair and maintenance work necessary to prevent breakdown of instruments.
* Perform scheduled Preventive Maintenance work and complete test and maintenance reports.
* Integrate new control instruments on new or existing plant equipment.
* Responsible for the calibration of different kinds of Process Analyzers. Checking is based on conformation on required ranges from engineering data sheet, DCS tag number, DCS alarms/limits and wiring termination.
* Responsible for functional tests of various kinds of Process Analyzers systems, which are repaired and overhauled.
* Repair and adjust Analyzer systems components or remove and replace defective parts.
* Commissioning and Start-up upon project completion.
* Daily updating of established Analyzer Performance Database.
* Capable of reading and interpretation of piping and instrument (PI&D), Instrument/Analyzer Loop Drawing, Instrument/Analyzer Hook-Up Drawing, Instrument Index and Electrical and Instrument wiring termination schedule.
* Installation/Commissioning/Maintenance of Fire & Gas Alarm System.
* Basic Electromechanical Control system design based on ladder concept.
* Computer hardware and software repair/troubleshooting.

Major Analyzers Maintained:

* Yokogaw GC1000 Mark II
* Ametek 5000 – Moisture Analyzer
* Panametrics – Moisture Analyzer
* Shaw – Portable Moisture Analyzer
* Teledyne – Oxygen Analyzer
* Sarasota – Density Meters
* Guided Wave NIR Analyzer
* Rosemount Oxymitter 4000 – Oxygen Analyzer

Projects Accomplished at Petron:

A. Project title: Design & Installation of TCC KILN Gas 02
Analyzer w/ sample Conditioning System
Project No.: BE04-0012
Inclusive date: June 2004

B. Project title: Installation & commissioning of Sentrol Series 770 Beam Infrared
Smoke Detectors @ PBR warehouse
Inclusive date: July 2004

C. Project title: Installation of ultrasonic flow meter for cooling water, fresh water, sanitary water consumer
Project No.: BE05-0009
Inclusive date: July 4, 2005 to September 2, 2005

D. Project title: Segregation of Existing Power & Signal Wires from the Field
Junction Box to the Enraf Level Gauge Mounted at Storage Tanks
TK-201,TK-202,TK-205,TK-206,TK-209,TK-210,T-213,TK-214,
TK- 217,TK-218
Inclusive date: October 2004

E. Project title: Conversion of Manual to Auto Firewater Deluge System
Project No.: BE07-0039
Inclusive date: October 2007 to February 2008

Other Past Served Clients:

A. CLIENT: SIEMENS POWER Inc. 1000MW CCPP
Brgy. Sta. Rita, Batangas City

Responsibilities:

Calibration of all Process Control instruments such as Pressure, Level, Temperature Transmitters. Pressure, Temperature Gauges. Pressure, Temperature Switches.

B. CLIENT: SHELL PHILIPPINES EXPLORATION B.V.
Brgy. Tabangao, Batangas City

Responsibilities:
Perform scheduled maintenance for 2 units of multi component Gas Chromatograph.

C. TRAININGS / SEMINAR ATTENDED:

* Basic Safety Training
Presented by: Fernando D. Martinez
Organized by: Petron HSE Department
Global Safety Services

* Principles & Concepts of Validation/Calibration of
Process & Laboratory Instrumentation Equipment
Presented by: Filipino C. Sonido
Organized by: TESDA Regional Training Center (Region IV)
I&E Industrial Systems Services, Inc.
* Rosemount Oxymetter 4000 Training
Presented by: TRIGON
Organized by: Petron Engineering Department

* Fire Alarm System
Presented by: AMZEN Industries Inc.
TYCO Integrated System Philippines Inc.
Organized by: Petron Safety Department

* Instrument Calibration Fundamentals
Presented by: Filipino C. Sonido
Organized by: I&E Industrial Systems Service, Inc.

D. COMPETITION PARTICIPATED:

* Philippine National Skills Competition
Venue: Gokongwei Brothers Foundation Technical Training Center
Inclusive Dates: June 27-28, 2001
Field: Mechatronics

E. EDUCATIONAL ATTAINMENT:

Vocational: Electromechanics
2001 TESDA IV Regional Training Center

College: BS Computer Engineering (Undergraduate)
2000-2001 De La Salle Lipa
Lipa City, Batangas

Secondary: Saint Bridget's College
1995-2000 M.H. del Pilar St. Batangas City

Elementary: University of Batangas (Western Philippine Colleges)
1989-1995 M.H. del Pilar St. Batangas City

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3401 to 3450 of 6411)

Go to Search Parameters...

Brief Description

Currently Principal Commissioning Engineer on Gas To Liquids project (Qatar), with 16 years experience in chemical and gas industries as operations technician, supervisor and lead commissioning engineer. Experience includes project work control and management.

Experience with CAD/CAE expertise.

A challenging position in an industrial setting that takes advantage of my experience in polymer science & rheology, reaction kinetics, surfactant chemistry, process engineering, modeling and simulation.

I have been in the Petrochemicals/Refinery Industry for more than 8 years now. And I have gained some knowledge and acquired experiences from the projects that I’ve worked with. From making isometric sketches, taking the materials take-off, handling an organized team to lead in assigned plant scope,

Surface controls system specialist with 12 years offshore experience.

Masters Degree Maintenance Engineering and Asset Management/ Experienced Condition Monitoring Engineer/Vibration Analysis/Rotating Equipment troubleshooting, repair, overhaul/oil analysis/ reliability improvement issues/ please see full CV for details

I am a Chemical Engineering Graduate with an Engineering Certification from the Robert Gordon University, Aberdeen via the Shell Training Programme, SITP/1. I work as a Petroleum Engineer in an Oil & Gas consultancy firm. I possess Business Development skills and an interest in Project Management.

Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries, in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction management.

7 years of experience in E & P business. Has extensively used Landmark data management and interpretation applications to solve geological and geophysical problems for the local and international clients.

In response to your ad on Internet, I am writing this letter to apply for full time Chemical Engineering position in your firm. Myself Sravanthi Ragireddy a Chemical Engineering Graduate student (Dec 2008) from LAMAR UNIVERSITY, Beaumont, Texas. I am very interested to discuss possible opportunities

Creative, Hard Worker, Have Initiative, Fast Learner, Curiosity, Enthusiastic & Computer Skills

M.E.(Process Instrumentation),automation

Recent graduate with an MSc degree in Oil and Gas Engineering and looking for a role where I could use the engineering knowledge and academic skills that I have gained from my MSc degree, and develop a long term drilling and well engineering career.

B.Tech from IITK, 4 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

More than 10 years experience in piping engineering, project control and engineering coordination for Petrochemical customers.

I have been working at Total E&P Indonesie as a Well Service Supervisor since 1998 until March 2006 (supervise slickline, well testing and maintenance, electricline (perforation and logging), snubbing unit and coil tubing unit) and as a Contract Workover Barge supervisor (with workover RIG) at CNOOC

Engineering Degree and having experiances on several industries (Manufacture, Petrochemical and Oil&Gas) for Vibration or Mechanical Position

Rig Manager OBJECTIVE: To obtain a challenging and creative position as an Oil field Engineer, that will allow me to provide a meaningful contribution to the Organization, utilizing my acquired knowledge and skills in the field of Oil Drilling Engineering.

Proactive, Adaptable, Practial, Organised, Thorough, Skilled manager, Team Player, Personable. I am looking for a shore based opportunity to make use of my drilling engineer skills and industry knowledge

Available for a 4 month Co-op Education work term from May 2004 – August 2004. Will have completed 7 of 8 academic terms towards a bachelor of Engineering degree.

Primarily focus on well completion, stimulation, and optimization. Design fracture treatments, cement completions, acidizing, and all completion methods.

I am presently employed at Coastal Aruba Refinery, Co. N.V. affiliate of El Paso Energy Corporation, (formerly Lago Oil Refinery & Transport Co. Ltd., subsidiary of Exxon until 1985) in Aruba, where my current function is that of lab technician with a permanent contract.

¨ Over seven years of experience in the Design & Detailed Engineering of Piping Systems for various metallurgical & power plants. ¨ Working knowledge of computer software packages; conversant with international codes & standards.

Total 8 years of experience. Well experienced in specifying, designing, detailed engineering, requisitioning, bid evaluation and reviewing vendor data of various types of Pressure Vessels, Tanks and packaged units. I am working from Houston, USA office of Bechtel since 2nd Sept. 2002.

Graduate-level Reservoir Engineer seeks to be part of proactive team to use strong analytical and problem solving skills in production, reservoir and geothermal engineering for a full-time position.

Excellent oral and written communication ability. Computer literate, with proficiency in Word, Excel, PowerPoint, AutoCAD2000i, MS Project 2000, CAD, Matlab, Microcap, Internet, Programming languages Assembler, C and VHDL. Extensive use of laboratory test equipment

PDS, Microstation, AutoCAD 2D/3D Piping Designer

B.Tech(Chemical Engineerin),Highly proficiency in english and management and Technical skills

Naval Architecture

B.E.& DIPLOMA IN MECHANICAL,EXPERIENCE IN CADCAM DESIGN,SHOP FLOOR MANAGEMENT,MAN MACHINE MANAGEMENT,ERP ENDUSER,INTERNAL AUDITOR ISO 9000,ISO 14000,ISO 18000,VENDOR DEVELOPEMENT

BE - ELECTRONICS & TELECOMMUNICATION , Fresher From MUMBAI UNIVERSITY

I am a senior technician in gas exploitation lng option from algerian institute of petroleum(aip) and i had done my studies in english. i have 2 years experience in oil/gas production facilities in algeria. i am working with Americans.

Analyzer Technician

I am lookıng for engeenerın posıtıon.I dont have experience but I can learn quıcly.I do love my jop.If you ınterested ın my cv please contact whıt me.Many Thanks

Dear Sir/Madam,

SEEKING A POST IN ESTEEMED COMPANY

I'm a competent and experienced pressure vessel & heat exchanger design engineer with excellent communication, motivational, organisational and interpersonal skills. An individual who possess a hands-on pragmatic approach to work, able to work alone or as part of a team.

I have worked in an engineering consultancy firm for Petrochemical, Refinery and Oil and Gas. Currently, I'm an Electrical Design Engineer of JGC Philippines, Inc. performing 2d and 3d design and draft in Autocadd and Microstation and 3D PDS respectively, for electrical works like Lighting, Power

I have 11 years of work experience, in Designing & Drafting various types of drawings using computer software, I am well experienced in drafting of engineering deliverables for Electrical, and Instrumentation for Offshore and Onshore Oil & Gas, Petrochemical and Power Plants.

Now I am in USA as a Research Scholar. I have done masters in geophysics. Also I have done masters in computer science. I have one and half year working experiece of seismic data processing and Interpertation, Unix, OpenWorks and Seisworks software support. Good communication skills. Hardworker

CAN DO ALL TYPES OF MAINTAINENCE OF INSTRUMENTS,THEIR CALIBRATION,ZEROING,ERROR DETECTION ETC.

B.Eng in Metallurgical Engineering

Having 6months experience as instrument technician completing BE

Chemist/Lab technician

• Diploma with a total of 7 years experience in Construction & Maintenance of Plant Instrumentation systems from planning and scheduling to execution of the job.

I have 7 years experienc in oil &gas &power plant industry,my experienc is about piping engineer,i am experienced to work with pds software .i worked with 3 forign country(LINDE/TECHNIP/DOOSAN).

A sound technical chemical engineer with much back gound of marketing knowledge/ experience. Hence able to work techno-commercially

Strong experienced leader with very good communication, negotiation and analytical skills. Very familiar with related design software & MS Office applications. Looking for permanent/contract position as Senior Civil, Structural, Offshore pipeline or Project Engineer for Oil & Gas Projects

A Senior Electric and instrument Engineer with a wide range of experience in the copper smelter & refinery. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

I have completed the post graduation diploma in piping engineering from suvidya institute of technology,mumbai in june-2007 and looking for piping job.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 [ 69 ] 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out