Resume - Total Exp. 2 years. Exploration, Drilling, Workover

Misco Jobs

Resume #72140

CONTACT INFORMATION:
View contact information...

Career Objective
As a Mechanical Engineer specialized in Gas Engineering, my interest lies in a career in the up-stream oil and gas sector, in a challenging and demanding environment, which will help me gain more knowledge and hone my skills.

Educational Qualifications
M.Tech (Gas Engineering): From University of Petroleum & Energy Studies, Dehradun, India.
Year of passing: May 2006 CGPA: 2.99/4.00

B.E (Mechanical Engineering): From Sri Venkateswara College of Engineering (University of Madras), Chennai (T.N), India.
Year of passing: May' 2004 AGGREGATE: 74. 00 %

Pre-Engineering:
Education Board College Percentage
Diploma in Mechanical Engg. Directorate Of Technical Education Panimalar Polytechnic, Chennai 83 %
Secondary T.N. State Board Examination Guru Nanak Mat. Hr. Sec. School 70 %

Experience
Present Employment: My first employer, a company based in Canada and operating in the upstream Oil & Gas Industry in India. I joined here as a Trainee Engineer in the Drilling Department on June, 2006. I was confirmed as an employee of this organization on February, 2007 and presently hold the position of Engineer – Drilling and was mostly posted at the company's rig site for both Drilling & Workover.

1. At Hazira asset, I was planning, coordinating and executing the activities at the rig site (Workover) based on the Work Plan given by the Manager – Petroleum. We did Workover operations in a total of 6 wells which included Gravel pack retrieval, Fishing operations, squeeze cement isolation of depleted zones, TCP/TTP, re-completion with Pre-packed sand-screen/flow-sub, slick-line operations (SSD open/close, gas lift valve/venturivalve installation, fishing, PX plug setting) & BHP survey on our land wells & offshore wells.

2. At Cauvery asset, I was involved in the Company's exploration project in the Cauvery. We drilled two wells in Nagapattinam district upto a depth of 1900m & 2400m, though both turned out to be dry. The rig that we worked was powered by hydraulic unit (non-conventional) using a hoist, with top drive & PLC controls.

3. At Hazira asset, I was involved in supervisory activity of Workover on offshore wells for recompletion, which included production string retrieval, perforations and Gravel pack completions.

4. At Surat asset, I was involved in estimating cost of operation, co-ordinating service-providers (from office) and co-ordinating & supervising drilling (on site) of 3 development wells for more efficient drainage of the reservoirs.

Internships & Projects worked on

M.Tech
Internship: Two months summer internship in GSPC – Niko Resources – Hazira Gas Facility, which covered the various operations and maintenance practices going on in a Gas Processing Facility, which also gave an exposure to the actual process flow and operation of the equipments in a Gas Processing plant.
Project worked on: Study of Hazira Gas Facility

B.Tech
Internship: Two weeks summer training in Sricom Communications Ltd., with the Manufacturing Department, at Chennai (T.N) during 3rd year of graduation.

Final Year Project: Grinding Studies on Titanium using Cubic Boron Nitride (CBN) Grinding Wheels

Fields of Interest
- Drilling & Production of Oil/Gas
- Pipeline Design, Operation & Maintenance
- LNG Plant Operations

Software Skills
- Operating System: WINDOWS Language: C, C++
- Package: MS Office, Auto CAD
- Basic Knowledge of Computer Hardware

Other details
- German Language: Passed 6 Levels in German Language.

Personal Details
- Date of birth: 16th December, 1982
- Marital Status: Single
- Nationality: Indian
- Passport: Holding an Indian Passport – valid till May 2011.
- Languages known: Fluent in English, Hindi and Tamil. Can understand and speak German
- Interests: Traveling, Music, Flute
- Strengths: Ability to adapt to changing environments

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 6411)

Go to Search Parameters...

Brief Description

Detail engineering

Electronics & Mechanical Engineering with QA/QC certification

Diploma of Associate Engineer In Electronics Technology(Supervised two shut-down at PARCO refinery in 2002, 2007 & my scope of work covered, Control valves, Compressor, Steam Turbine & high pressure Pumps instrumentation removal, overhauling, calibration check, reinstallation and start-up sport)

Having eleven years experience in field of Oil , Gas & Petrochemical industry

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Passed Matriculation from Bombay Board in English,:Passed Diploma from Kohinoor Technical Institute in Industrial-Elect, Two years course.Attend Safety Training in QATAR GAS, SABIC,ADNOC . HSE Induction,H2S Awareness and Escape. Received Safety Award Certificate from ADNOC on its ongoing projects.

Bachelor of Electrical Engineering [BE] : 5 Years Hands On Experience in Power Utility Company in Medium and Low Voltage System Operations and High voltage 132KV/11KV Substation Protection Systems

Process Engineer, having 2 years of experience in Oil and Gas sector, working in FEED department. Having exposure to Process Simulation tool like HYSYS STEADY STATE HYSYS DYNAMIC SIMULATION, ASPEN PLUS, SULSIM and Equipment Design/Rating Software like HTRI, HTFS, KG TOWER, and SULCOL.

I am presently employed with Black&Veatch, a US based reputed company doing mainly Oil &Gas and EPC projects mainly in power plants.

Process engineer with two years of experience in the feild of basic enginnering, front end engineering design and precommissioning and commissioning of process plants.

Provide day to day on-site supervision of drilling operations to ensure operations are performed in accordance with the Drilling Program in a safe cost-effective manner.I m responsible for Health and Safety procedures being continuously enforced

Development, maintenance and utilization of the full field reservoir simulator

I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.

Total Exp. 2 years. Exploration, Drilling, Workover - offshore and onshore wells. Estimating cost of oprn., coordinating with service providers, supervising drilling operations.

PLC programming, installation and commissioning of motor drives/ process controller and instruments and have expertise in board-level repair of electronics controls and PC board.

•Leadership Quality,•Loyalty with the assigned responsibility,•Decision making •Desire to produce better results than previousability,

Drilling supervision and engineering, well control instructor, rig commessioning

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.

FIELD PIPING ENGINEER - OIL AND GAS ONSHORE / OFFSHORE LEAD PIPING DESIGNER, CHECKER

Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.

TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET

Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.

I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.

Project Management

Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba

SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.

Senior Piping Designer PDS

Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.

Rig mechanic, mechanic supervisor, motorman, diesel mechanic

Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer

Mechanical Maintenance Engineer/contract and Procurement Engineer

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Quality engineer in offshore and onshore fields

Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)

Registered Mechanical Engineer Cert. No.61058,CSWIP 3.1 Cert. No.35530

Electronics Technician / Telecom / SATCOM / Electronic Tools

Specialised in PROJECT & PRODUCTION MANAGEMENT ,QUALITY , MANUFACTURING, HSE

Proficient in CAESAR II, Korf Hydraulics, AutoCAD, Primavera and MS Office.

ESSAR OIL LTD- FCCU (May 2005 to May 2008)

18 years in field operations, management, production engineering, gas processing. tight formations, CBM and shales.

B.Eng(Petroleum Engineering);Diploma(Object-oriented/Scientific programming);Experience in Cementing, Stimulation(CT/N2 jobs),Completions fluids/Wellbore clean-out tools

Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.

Petroluem Engineering

Mechanical / Static / Pressure Vessel Engineer (~5 Years Oil & Gas Experience)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out