Resume - Mechanical Design Engineer

Misco Jobs

Resume #72154

CONTACT INFORMATION:
View contact information...

STATEMENT OF QUALIFICATIONS
Intelligent, creative, and flexible Mechanical Design Engineer with wide-ranging experience and valuable heat exchanger design expertise
Specialist in the design of shell and tube heat exchangers for thermal heavy oil service
Other experience includes software programming and mechanical design
Professional exposure to the diverse areas of heavy manufacturing, medical, and oil and gas fields
Enjoys solving problems and being met with challenges; nimble and agreeable
Technical and computing skills include: HTRI, Compress, LabVIEW, SolidWorks, MS Office suite, MS Project, and Mathematica
Member of HTRI Canadian Communication Committee

PROFESSIONAL EXPERIENCE
IMV Projects Inc., Calgary, AB 2006 – Present
Mechanical Engineer (2007 – Present)
Focus on thermal heavy oil plant (SAGD, CSS) heat exchanger design in the Alberta oil sands, specifically: shell and tube exchangers, spiral exchangers, plate and frame exchangers, air coolers, hairpin exchangers, double pipe exchangers in both oil and water treatment areas
Also design pressure vessels and confirm pump designs
Originate design and requisition of mechanical equipment, including:
Review of initial data sheets and process flow diagrams
Create heat exchanger design in HTRI
Generate and revise data sheets, material requisitions, and material/equipment specifications
Serve as liaison to vendors during bid, proposal and cost estimation process
Review and approve drawings, calculations, and other ancillary documents to ensure that all requirements, specifications, and codes are fully satisfied with an eye to reduced capital cost and engineering hours
Provide general mechanical facilities design and coordination
Create and update mechanical specifications
Create and maintain equipment lists and cost estimates

Project Engineer (2006 – 2007)
Focused mainly on natural gas (conventional, CBM) pipeline and plant facilities design
Managed aspects of design and requisition process, including:
Generated material/equipment specifications
Created design basis memorandum
Prepared construction contract scope of work
Developed piping and instrumentation drawings
Created project schedule
Assisted in preparation of regulatory applications
Served as liaison to vendors during bid, proposal and cost estimation process
Reviewed drawings, calculations, and other ancillary documents
Estimated and tracked costs and man-hours
Provided mechanical facilities design and coordination and managed client relations

Advanced Flow Technologies, Calgary, AB 2004 - 2006
Design Engineer
Design and manufacture of a low cost, remote natural gas flow monitoring system
Served as lead mechanical engineer during product redesign phase
Reduced component costs by approximately 85% while further optimizing product functionality and ease of assembly
Developed, implemented, and supervised the initial testing and quality assurance program resulting in the increase of product quality and the decrease of costs related to product failure
Developed prototype software application for remote monitoring and reporting of natural gas flow, enabling producers a low cost means of monitoring production levels without visiting the well site
Performed research and product development duties during prototype stage, yielding improved product functionality while reducing product manufacturing and assembly cost
Developed software for testing and data analysis purposes allowing technicians to work in an expanded capacity and increase productivity

University of Calgary, Calgary, AB 2002 - 2004
Research Associate
Refined a titanium investment casting process in order to reduce pour wastage through the design and implementation of a neural network based predictor algorithm
Developed software applications for engineering laboratories using LabVIEW programming skills and knowledge of computer network structure, allowing unsupervised remote student access to laboratory equipment outside regular laboratory hours
Co-developed a patented device for the remote, accurate, and non-invasive monitoring of motion in the human elbow joint

Teaching Assistant
Delivered lectures to the fourth year mechanical and manufacturing engineering design course, 2004
Provided guidance and mentoring to first year engineering students as the engineer in residence for the common core first year engineering design course, 2004
Provided guidance and mentoring to first year engineering students as the senior TA for the common core first year engineering design course, 2003-2004
Provided guidance and mentoring to fourth year mechanical engineering students as a TA for the final year mechanical engineering design course, 2002-2003
Delivered laboratory sessions and review tutorials as the TA for the fourth year mechanical engineering vibration course, 2003

EDUCATION
Master of Science in Mechanical Engineering, University of Calgary, Calgary, AB 2006
Research focused on the application of a new design methodology and the design and construction of diagnostic medical devices for assessing low back pain
Medical device design featured by the Faculty of Engineering in February 2004 media presentation
Design methodology research presented at the 2004 Canadian Design Engineering Network inaugural conference

Bachelor of Science in Manufacturing Engineering, University of Calgary, Calgary, AB 2002
Minor in Mechanical Engineering
Recipient of special achievement award in fourth year engineering design course for the design of a modified bicycle to allow a woman with multiple sclerosis to safely ride without the risk of falling

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4451 to 4500 of 6411)

Go to Search Parameters...

Brief Description

I have worked during 9 years in the pumping services doing almost all the time cementing.

Projectmanager process watertreatment wastewater water biofuels bio fuels plantengineering plant engineering engineer claimmanagement commissioning basicengineering, detailengineering sitemanager tendering scheduling calculation

B-TECH ELECTRICAL

Well Test Interpretation in Horizontal and Vertical Wells

ESP Analyst, Senior Logging Engineer

Over 12 years experience of materials management in one of the largest oil fields of the World (Tengiz, Kazakhstan). I am looking for a Materials Coordinator, Materials Controller, Warehouse Supervisor or any other materials or logistics related job preferably in oil and gas industry.

Boiler operator& maintenance engineer (HRSG)

Master in chemistry with 2 years experience in quality control and production department. Handled pant manufacturing company as shift in charge, done various seafood analysis and water quality analysis, knowledge in plant safety,

Overseas and local experiences and intensive trainings in petrochemical, oil and gas fields

Multi Dsicpline Insepctor with working experience in both onshore and offshore fabrication/Installation/Hook-up

Degrees in Electronics and Instrumentation.Highly detail oriented, and organized. Good planner, a self-starter with ability to meet deadlines, and personable. International experience in & gas and other industries.

Senior Planning Engineer, > 15 years experience in upstream oil&gas projects, construction.

I am a fresh graduate from university of padjadjaran, basicly in geological engineering..I declare myself as nice and energetic person, hard worker, quickly adapted with a new condition, i'm willing to be located anywhere. I have some experiences project in oil and gas company as junior geologist.

To secure a senior level position responsible in Project Management, Engineering, Procurement and Construction aspects of heavy industrial petrochemical, chemical and power plant projects.

I have worked mainly on structural geology, exploration geology (boreholes) and applied geology. From February 2007 I’m working as Employer’s Representative Head Geologist in Ethiopia (Gilgel Gibe III Hydro Electric Power Project, EPC Contract). Since 2002 I’ve worked in Italy, France and Austria.

B.Tech (Chemical Engg.) from India's one of the premier institue , MBA(Operations Mgmt) from IGNOU . Wide and rich experience in Precommissioning, Commissioning, DCS operation, Field jobs supervision, Safety work permit system , Process Design review, P&ID , PFD , Mass and Energy balance , HAzop.

performining job as instrument technologist in pak arab refinery limited. pakistan

Position as Mechanical Engineer or any other suitable opening to enhance my career in oil/ gas or any related Industry to offer challenges and career advancement.

ENVIRONMENTAL HEALTH & SAFETY COORDINATOR : 5 years on sites (petrochemicals, chemicals, car industry, nuclear, steel, water industry)

In addition to Mechanical Engineering degree, completed academic part of Bachelor of Applied Petroleum Engineering Technology program from SAIT Calgary, (AB) and looking for a position to complete practical part of above program.

I am instrument technician

registered geologist and Incident Commander. His experience includes 3 years as a Student Trainee in many fields & Lab Technician for internship jobs and 3 mount as an Geophysics Research Assistant.

Experience in generation of petrophysical models in clastic reservoir (consolidate and unconsolidated sand) based in the integration of conventional and special logs techniques, geological and geophysics information and fluids.

Integral Geologist general knowledge about the exploration process, focused on the development of projects for the generation and evaluation of exploration prospects.

1. Work Experiences 2. Education Qualifications 3. Apprenticeships 4. Computer Proficiency

8 Years of Experience in IT Projects in PDVSA (Venezuelan Oil & Gas Company) and Contractors. I have worked in Infrastructure, Server/Client & WEB Projects in all activities involved

Mechanical Design Engineer

I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis

Piping Engineer (Construction) Diploma in Mechanical Engineering Forteen years experience

Detail and task-oriented Mechanical Engineering professional with an exemplary background in automotive and manufacturing industries. More than 10 years of experience with a track record of propelling technology to optimize performance and profitability. Creative and innovative in conceiving and de

Senior Project Manager, Quality Manager, International experience

I hold a Master Degree in Civil Eng. – Canadian Equivalent and possess 17 years of professional experience in Project/Construction Managt, Design and Manfg of Structural Steel and Pre-Eng. Buildings. Regstd PE in Canada on August 05.

A total of 9 years of experience of which 3 years at Bharat Heavy Plates &Vessels Visakhapatnam a leading Fabrication Workshop in various capabilities of production, welding, inspection of materials, construction, planning, project engineering and informatics

I have 15 yrs experience in Mechanical, Strustrual, piping in projects& running field in Refinery, petrochemical, oil & gas, chemical, ship repair maintenance & new building as a Sr. mecanical engg., mech manager, Sr. piping engg.

A petroleum engineer with over 9 years experience in surface and subsurface offshore and onshore operations of big oil and gas installation in different capacities.

Power Electrical Engineer (Power Transformer Designer)

Competent with use of ECLIPSE simulation package; Proficient with use of LESA to analyze well logs; Ability to use VIRTUWELL (Fekete) to analyze multiwell performance; Able to use ChemCAD to simulate oil field processes; Interpretat

I am looking for an Internship in the sphere of transportation/storage of oil and gas. I’m eager to begin at a position of engineer assistant or any other after I get my Bachelor Degree in Transportation and Storage of Oil and Gas at Ivano-Frankivsk National Technical University of Oil and Gas

Motor mechanic, ITI, Diploma, Six years Experience

Looking for a lucrative job in a challeging environment as a Petroleum Engineer

25 Years experience in Refinery Process, Boiler Plant Operations and Boiler Inspections

Chemical engg / MSCManagement

My Resume attached below outlines my career accomplishments very well. I have built a sucessfull career based on excellent service, leadership and hard work. I would be glad to discuss my qualifiactions further in an interveiw. Hope to here from you soon, Ryan

BSc. in Applied Physics & Instrumentation. Hands on field experience in Biopharma and the Oil & Gas Industries

All discipline Draughtsman w/ Architectural, Structural, and Electrical & Mech. experienced and more than five years in Design & Construction Environment both local & abroad.

Full Technician in Automotive engineering/ Marine

AutoCAD 2002 and Visio Technical 2000

My resume

Qualifications in oil field drilling supervisor two years on sonatrach in algeria hassi massoued , work in only section of drilling

27 years in manufacturing indusrty from panel operator to operations supervisor. Currently employed as a startup and commissioning consultant.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 [ 90 ] 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out