CONTACT INFORMATION:
View contact information...
OBJECTIVE
Exploring opportunities to apply extensive experience in Petrochemical, Chemical, Oil & Gas Refinery plant/facility operations, maintenance, and energy management, in a challenging career environment where strong communication, project management, troubleshooting, and performance optimization skills can be effectively utilized.
INSTRUMENTATION ENGINEER
Extensive engineering career featuring over 17 year's experience. Proven ability to deliver innovative solutions that serve corporate objects, Project Planning, Project Engineering (Instrumentation), Implementation, Procurement, Construction, Commissioning, startup and process monitoring for Petrochemical, Chemical, Oil & Gas Refinery.
RESPONSIBILITIES
* Responsible for the planning, evaluation cost estimating, specification and commissioning of Instrumentation systems for Petrochemical, Oil & Gas refinery.
* Co-ordination with client / process licenser for basic data's.
* Development of P&ID, Instrument index, Layout drawings, Instrument Hook-up drawing and installation details, documentation and instrumentation drawing reviews, location drawings, MTO's (Material Take-offs).
* Preparing cable schedule (CONTRO ROOM, JB, inter-panel), Air manifold schedule, I/O counts, In-line control devices, sizing of different valves, flow measurement, analyzers, conduit and cable routing, panel design, datasheet generation.
* Procurement & Inspection of instruments before shipping to site.
* Manage field installation for instruments installed in field, panels at control rooms & sub-station, Troubleshooting, On-line installation, Maintenance of field instrument, Interpretation of P&ID, reviewing single line diagrams, Schematic diagrams, Equipment and Mechanical drawings, Layout drawings, Vendor documents.
* Preparing reports for Instrumentation & Control installation on field and control room.
* Responsible for technical functions including design of temporary construction facilities, interfacing with Design Engineering, work planning, and materials Management, Inspection and acceptance of completed work.
* Assist Quality Assurance Department in implementation of projects Construction Quality Control requirements including inspection and testing of in-process and completed installations.
* Make as built drawings and documents.
WORK HISTORY
VELOSI LLC, Sultanate of Oman.
14th September 2007 to till date.
Designation: Senior Inspection Engineer - Instrumentation.
At present I am working at MARMUL for polymer project as Instrument Construction Supervisor-OSEP-33, PDO Site, presently I am responsible for all Construction activity and QA/QC Inspection-Instrumentation for behalf of PDO-Oman.
I was commissioned NAHADA booster project, PDO Site, I carried out all construction supervision and QA/QC Inspection-Instrumentation for behalf of PDO-Oman.
WORLEY PARSON-ARABIAN INDUSTRIES LLC, Sultanate of Oman.
7th December 2005 to 4th September 2007.
Designation: Sr. Instrument Supervisor.
Responsible for Engineering [Instrument index, Instrument Hook-up drawing and installation details, cable schedule (MCC, JB, inter-panel), Air manifold schedule, I/O counts, In-line control devices, sizing of different valves, flow measurement, conduit and cable routing, panel design, datasheet generation] Procurement & Inspection at vendor's shop, Follow-up with Client & Vendors, Finalization of Sub-Contractor, Planning, Supervision, Erection of all Field instruments & DCS/PLC.
BSPL – BASF STRYRENICS PVT. LTD. Dist. - Bharuch, Gujarat, India.
From – 7th July 1999 to 4th December 2005.
Designation: Instrument Officer.
BASF is the one of the largest polystyrene producer in the world. BSPL, a family member of BASF group, Germany with the technology of M/S MITSUI, Japan. The plant has two streams to produce HIPS & GPPS resins. Each Stream has the capacity of 30,000 TPA. Therefore total plant capacity is 60,000 TPA.
I had worked in Petrochemical plant & looking after
1)DCS of Yokogawa – CENTUM CS 1000
2)Programmable Logic Controller
Siemens SIMATIC S5 115U (CPU 944 B), Siemens SIMATIC S5 100U (CPU 103),
GE-Fanuc 90-30 series (CPU 340 & 311), LG master K 200 series, Allen – Bradley
(Micro logic 1000)
3)Cutter of HANJIN – Korea
4)Bagging and Packing machine (Fully automatic) - Chronos Richardson, U.K.
5)Field Instruments like: Smart Transmitters (Yokogawa, ABB& Rosemount), Electronic Transmitter (Alflow, Dynisco, A&D), Mass and Magnetic flow meter (E&H, Yokogawa), Nucleonic Level Gauges (Bert hold, Germany), Displacer type Level Transmitter, Control valves (IL, MIL, Virgo, Dembla, Mazda, Yamatake), On-Off valves (Virgo, Elo-matic, AUMA, Xomos), Conductivity and pH meter (BELA Instruments), Local Instruments like Gauges, Rota meter, Recorders and Electronic sensors)
6)Preventive maintenance, Calibration of Instruments and Modification Jobs.
* I was Radiological safety officer of BASF Styrenics PVT LTD.
RAJASHREE POLYFIL, Dist.-Bharuch, Gujarat, India.
From – 8th January 1998 to 6th July 1999.
Designation: Instrument Technician.
RAJASHREE POLYFIL (A Division of Century Enka ltd.) a B.K.Birla group of company. The plant has two streams for to produce PET (Poly Ethylene -Terepthalate), POY (Partially oriented Yarn)
Poly section design package supplied by ZIMMER (GERMANY), spinning section design package supplied by AKZO NOBEL (HOLLAND).
PET chips capacity – 30,000 TPA and POY capacity – 40,000 TPA
Rajashree polyfil is ISO-9002 Company.
I had worked in Petrochemical plant & looked after,
1)DCS of Honeywell – TDC 3000 X (GERMANY)
2)Programmable Logic Controller
Siemens SIMATIC S5 100U, Siemens SIMATIC S5 90U, Allen–Bradley (5/80E, 5/40E).
3)Cutter of RIETER – Germany
4)Bagging and Packing machine (Fully automatic) - Chronos Richardson, Germany
5)Spinning winder – BARMAG (Germany)
Field Instruments like: Smart Transmitters (Rosemount, Siemens), Electronic Transmitter (Dynisco), Mass and Magnetic flow meter (Rosemount), Control valves (Schmidt, Armaturan-astria, I.C-Kota, IL), Conductivity and pH meter (Rosemount), Local Instruments like Gauges, Rota meter, Recorders and Electronic sensors).
6)Preventive maintenance, Calibration of Instruments and Modification Jobs.
CONSOLIDATED CONTRACTORS COMPANY WLL, KUWAIT
From – 22nd September 1996 to 29th September 1997.
Designation: Instrument Technician.
Details knowledge of P&ID drawing, installation standards, cable schedule, loop diagrams, inter panel-wiring diagrams. Preventive maintenance, Calibration of all type Instruments, control valves, safety valves, Flow Measurement, Level Measurement, Temperature Measurement and Pressure Measurement, Modification Jobs, Installation of instruments, documentation and instrumentation drawing reviews, Loop checking, Trouble shooting, Commissioning and pre-commissioning, Assisted Quality Assurance Department in implementation of project Construction Quality Control requirements including inspection and testing of in-process and completed installations, Preparing reports for Instrumentation & Control installation on field and control room, Panel mounted instruments & DCS/PLC, Preparation of as-built drawings.
CONSOLIDATED CONTRACTORS INTERNATIONAL COMPANY, SAL, Abu-Dhabi, UAE
From – 21st April 1995 to 25th February 1996.
Designation: Instrument Technician.
Details knowledge of P&ID drawing, installation standards, cable schedule, loop diagrams, inter panel-wiring diagrams. Preventive maintenance, Calibration of all type Instruments, control valves, safety valves, Flow Measurement, Level Measurement, Temperature Measurement and Pressure Measurement, Modification Jobs, Installation of instruments, documentation and instrumentation drawing reviews, Loop checking, Trouble shooting, Commissioning and pre-commissioning, Assisted Quality Assurance Department in implementation of project Construction Quality Control requirements including inspection and testing of in-process and completed installations, Preparing reports for Instrumentation & Control installation on field and control room, Panel mounted instruments & DCS/PLC, Preparation of as-built drawings.
CONSOLIDATED CONTRACTORS COMPANY, WLL, King Dom of Saudi Arabia.
From – 16th February 1993 to 15th February 1995.
Designation: Instrument Technician.
Details knowledge of P&ID drawing, installation standards, cable schedule, loop diagrams, inter panel-wiring diagrams. Preventive maintenance, Calibration of all type Instruments, control valves, safety valves, Flow Measurement, Level Measurement, Temperature Measurement and Pressure Measurement, Modification Jobs, Installation of instruments, documentation and instrumentation drawing reviews, Loop checking, Trouble shooting, Commissioning and pre-commissioning, Assisted Quality Assurance Department in implementation of project Construction Quality Control requirements including inspection and testing of in-process and completed installations, Preparing reports for Instrumentation & Control installation on field and control room, Panel mounted instruments & DCS/PLC, Preparation of as-built drawings.
VIHITA CHEM. PVT. LTD, ANKLESHWAR, Dist.-Bharuch, Gujarat, India.
From – 1st May 1991 to 8th February 1993.
Designation: Instrument Technician.
Preventive maintenance, Calibration of all type Instruments, control valves, safety valves, Flow Measurement, Level Measurement, Temperature Measurement and Pressure Measurement, Modification Jobs, Installation of instruments, documentation and instrumentation drawing reviews, Loop checking, Trouble shooting, Commissioning and pre-commissioning, Assisted Quality Assurance Department in implementation of project Construction Quality Control requirements including inspection and testing of in-process and completed installations, Preparing reports for Instrumentation & Control installation on field and control room, Panel mounted instruments, Preparation of as-built drawings.
TECHNICAL EXPERIENCE:
I have experience in maintenance and as well as in, quality control and construction.
Working Knowledge of ISO 9001-2000 & 14001.
DCS of Yokogawa – CENTUM CS 1000, Honeywell – TDC 3000, Foxboro, Emerson-Delta V, Bailey-Signature series.
Programmable Logic Controller (PLC) – Hima PLC, Siemens SIMATIC S5 115U (CPU 944 B), Siemens SIMATIC S5 100U (CPU 103), Siemens SIMATIC S5 90U, GE-Fanuc 90-30 series (CPU 340 & 311), LG master K 200 series, Allen – Bradley (Micro logic 1000), Allen – Bradley (5/80E, 5/40E), Triconex PLC for ESD System, SCADA System, Modicon PLC for Fire and Gas system by Cerberus pyrotronics.
Bagging and Packing machine (Fully automatic) - Chronos Richardson, U.K. & Germany.
Preventive maintenance, Calibration of Instruments and Modification Jobs.
EDUCATIONAL QUALIFICATION:
DIPLOMA IN INSTRUMENTATION with first class 69.7% from National Polytechnic, Bharuch, Gujarat, India.
TRAINNING:
* I have successfully completed the course in NUCLEONIC LEVEL GAUGE at BARC, Mumbai, India. (Radiation Safety Officer)
* I have successfully completed the course in CS-1000 FUNDAMENTALS & ENGINEERING conducted by Yokogawa India Ltd. Bangalore.
SAFETY COURSE:
* PERMIT TO WORK-SIGNATORIES
* BASIC GAS TESTING
* BASIC LIFE SUPPORT (FIRST AIDER)
* JOB HAZARD AWARENESS
* SUPERVISING SAFETY
* INCIDENT INVESTIGATION
* ENHANCED SITE SUPERVISION WORKSHOP
* H2S (HYDROGEN SULPHIDE) AWARENESS
PERSONAL DETAIL:
* AGE: 37 YEARS
* DATE OF BIRTH: 10-06-1970
* PLACE OF BIRTH: VILLAGE – NABIPUR, DIST.-BHARUCH, GUJARAT
* LANGUAGE: ENGLISH, HINDI, GUJARATI
View contact information... |