Resume - Quality Assurance/Quality Control, Audit, Inspection & Testing, Welding, NDT

Misco Jobs

Resume #72236

CONTACT INFORMATION:
View contact information...

Quality Assurance ~ Quality Control ~ Audit ~ Inspection ~ Testing ~ Welding ~ NDT

APERCU An incisive professional with over 12 years including over +2 year of experience in Middle East encompassing Quality Assurance/ Control, Documentation, Testing & Inspection, NDT, Welding, Mechanical, Painting, Coating during construction & installation of various oil/gas projects and in service inspections in plant, Turnaround (Shut-down) and shipping Vessels. Demonstrated skills in developing & executing quality plan for the project. Deft in conducting service inspection related to Plant Air System, Vessels, Columns, Pumps, Pipes & all type of Valves, (NDT, Painting, Lifting Equipment, Offshore Equipment ¡V SPM & Cranes, Slings and other related in Service Inspections for Oil & Gas Companies. Skilled in developing QAPs, establishing systems/procedures for best quality Control/inspection. Expertise in collection of samples of production, analyzing and then making recommendations on how to increase the quality of goods. Implementing procedures for ensuring adherence to the quality standards. Adroit in maintaining in-house quality systems ensuring compliance to the defined quality guidelines. Possess a clear understanding of the industry, and quality control technique, international codes & standards. Proven expertise in conducting vendor inspections and laboratory testing. Accomplished several Cross-country Piping (Production unit), Petrochemical, Desalination Plant, Chemical Plant Projects in India, Saudi Arabia and U.A.E. Thorough professional with strong planning, interpersonal skills with abilities in liaising with people at all levels in the organization.

KEY FUNCTIONAL STRENGTHS

SUPPLIER QUALITY & TECHNICAL ASSURANCE
„X Assessing performance of the vendors based on various criterions like Supplier Verification, Vendor Ratings, Quality Improvement Rate Etc.
„X Approving control plans at vendor's end & undertaking finalization/ submission of PPAP, MSA & FPP activities.
„X Planning & carrying out process audits at vendor's end and to monitor trends.
„X Providing technical guidance to the vendor team, guiding them on resolving performance bottlenecks.
„X Maintaining Supplier databases, monitoring/ reporting of suppliers overall performance & resolving problems on suppliers end.
„X Coordinating & reporting supplier performance & quality issues to SQE's with respect to incoming quality issues.
„X Undertaking support localization which includes validation of localized components / vendor development activities (PSA & process audits).

TESTING & INSPECTION
„X Testing, inspection & certification of products of different nature, items & raw material used in related industries.
„X Executing method development and validation i.e. rigorous testing of methods to ensuring that the products are precise, accurate, reproducible, "fool-proof" and specific to product etc.
„X Conducing inspection of inward items such as Sub-contract works, Tools, Stationary and Brought out Items as per process layouts and materials are per test certificates.
„X Developing & executing Inspection Test Plan & Quality Records development for various Quality control procedure (if required) like Material control and traceability, Weld control, weld consumable control, post weld heat treatment, NDT controls, Pressure testing, Hardness Testing.
„X Observing Hydro test and Pneumatic test of piping system, Gross Leak testing of various systems.
„X Undertaking blasting & painting inspection as per specified scheme.
„X Verifying all applicable calibration certificates for Measuring Instruments and Machines.
„X Performing In-house and Sub-contractor Audits for verification of implementation of Quality procedure and Continual Improvement in Quality system.

QMS IMPLEMENTATION
„X Maintaining QMS as per Project specification, code, standards and Company's In house procedure.
„X Undertaking QC activities for fitness for purpose of job, continual improvement in various QC procedures as required.
„X Preparing and maintaining Quality records for final Handover.
„X Synchronizing calibration, maintenance and operation of test lab; devising & implementing process & quality plans & undertaking SPC study for critical parameters. Implementing customer specific quality system activities.

WELDING /FABRICATION
„X Monitoring & reviewing WPS, PQR, Welders qualification tests as per codes and specification.
„X Conducting inspection of piping and structural fit ups & installation of system piping.
„X Welding the parts together, repairing and maintaining equipment and machinery & constructing metal objects according to instructions.
„X Verifying all safety aspects for Welders, Fabricators and others working subordinates.
„X Supervising Non Destructive Testing on weldments (UT, MPI, PT) and Radiography Interpretation.

MATERIALS INSPECTION - INCOMING & IN-HOUSE
„X Maintaining quality standards for incoming materials, ensuring stringent adherence to quality standards, norms & practices, identifying gaps & taking corrective action
„X Handling in-house material testing/ inspection of components and undertaking In-house rejection analysis.
„X Monitoring mechanical testing (Tensile/Bend/Impact), positive material Identification test of base material & weldments.
„X Performing assembly checks in assembly section & maintaining assembly inspections reports, raw-material identification reports, components inspection reports, log books, calibration records, rework notes, rejection notes, route cards, non-conformity reports, test & clearance certificates.
„X Managing internal / external testing of material / components as per set standards as a part of localization programme.
„X Undertaking inspection activities during shipping Pumps installation.

CUSTOMER RELATIONSHIP MANAGEMENT
„X Monitoring the quality performance of all customer issues & carrying out product, process & systems audits as well as preparing & driving PPM reduction plan.
„X Tracking & improving customer satisfaction levels by enhancing quality & reliability levels through continuous improvement.
„X Analyzing the quality concerns, identifying root causes, finalizing & implementing correction action plans.

KEY PROJECT HANDLED ACROSS CAREER

„X DFA Project for Hindustan Lever Limited, Pondicherry with TATA Consultant.
„X LNG ¡V Terminal Project for Gujarat State Petronet Ltd., Dahej, India with Foster Wheeler (TPI).
„X Diesel Hydrotreater & Crude Column modification for Reliance Industries Ltd. (major turnaround).
„X Debottleneck Project for Yanpet, Yanbu (KSA) with ABBLYMMUS (TPI & Consultants).
„X World tallest Crude Column for ESSAR OIL with ABB Consultant.

EMPLOYMENT SCAN

Mar`07 ¡V May`08: Engineer QA/QC
M/s. NICO International - EPC Contractor Total Oil Storage Terminal Project

Role: Performing QAP & ITP of various items (Onshore Oil Storage & Offshore Pipe Lines). Undertaking Sub-Contactor assessment & QAP approval.
NOTABLE CONTRIBUTIONS
„X Awards/appreciation letters received from FAL Energy
„X Quality process/ procedure introduced and implemented

Dec`05 ¡V Feb`07: Sr. Engineer QA/QC
M/s. Essar Oil Limited

Role: Conducting Vendor & Crude Column Inspection & performing QAP, inspection activities during Erection & Installation of mechanical equipment for Piping. Managing Quality Control Operations for vendor inspection & expediting.

Dec`04 ¡V Dec`05: Engineer - QA/QC
M/s. Reliance Engineering Associates Limited

Role: Formulating & implementing Project Quality Plans, interpreting Drawings & Specifications. Conducting inspection of vessels, columns, reactors and heat-exchangers with assurance of materials and consumables correctness. Undertaking inspections of weld joint & design before welding, and visual inspection during and after welding. Determining type & extent of inspection required as specified in governing code for NDT and coordination with NDT crew. Re-assessing NDT reports. Carrying out Line check & punch list work. Reviewing & accepting QA packages and final handover document.

Apr`04 ¡V Sep`04: Engineer-QA/QC
M/s. Saudi Bin ladin Group-PCM Division

Role: Handling activities pertaining to piping replacement & structural works Modification and replacement of internals of Columns & vessels. Performing activites as per ASME, SABIC & Client Specifications/ requirements.

Aug`03 ¡V Mar`04: Engineer-QA/QC
M/s. Reliance Engineering Associates Limited

Role: Implementing contractor quality plant & producer for Pre- shutdown & shutdown activities. Reviewing control reports as per quality plan.

Mar`02 ¡V Aug`03: Engineer-QA/QC
Welspun Gujarat Stahl Rohern Limited

Role: Developing & implementing Quality improvement plan. Conducting internal quality audits.

Dec`00 ¡V Feb`02: Engineer-QA/QC
M/s. Neostructo Construction Ltd.

Role: Undertaking activities regarding inspection, testing & monitoring for pile fabrication & Painting. Maintaining documentation of all records & fabrication and erection of Piles & EOT Cranes (100 Tones, 60 Tones and 40 Tones) equipments are in state of valid calibration.

NOTABLE CONTRIBUTIONS
„X Successfully accomplished LNG Jetty project for key client's viz. PETRONET, BNI & TPI- Foster Wheeler.

Jun`98 ¡V Nov`00: Site Engineer
M/s. Hindustan Lever Limited

Role: Ensuring timely execution of fabrication, erection job, Inspection, testing and material reconciliation of the fixed roof tankages CS and CS with SS cladding, Silo, Piping.

PREVIOUS EMPLOYMENT

May`97 ¡V Feb`98 M/s. Toole (P) Limited, Pondicherry Tool Room Supervisor

May`96 ¡V May`97 M/s. Popular Engineering Site Supervisor
(HLL Site, Pondicherry)

CERTIFICATIONS

„X Certified:
- Welding Inspector (CWI) in Welding Research Institute in Tirchy (India)
- Welding Inspector CSWIP-3.1 (Cert No. 18102) from TWI, London (UK)- (Validity upto ¡V 20/November/2009)
„X Certification as:
- ASNT Level II in Ultrasonic testing¡V India.
- ASNT Level II in Radiographic film interpretation ¡V India.
- ASNT Level II in Magnetic Particle Testing ¡V India.
- ASNT Level II in Liquid Penetrate Testing¡V India

SCHOLASTICS

1996 Diploma in Mechanical Engineer from Elumalai Poytechnic.

PERSONAL VITAE

Date of Birth: 21st October, 1973
Marital Status: Married
No. of dependents: 04
Nationality: Indian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4201 to 4250 of 6411)

Go to Search Parameters...

Brief Description

Electrical Fitter with experience as a Condition Monitoring Technician/Project Manager since 1994. Highest skill level in Predictive Diagnosis. (Vibration Analysis, Oil Analysis, Wear Debris Analysis, Thermography, Ultrasonic Detection, High Voltage and Low Voltage motor testing).

Formation damage, workover candidate selection, hydraulic fracturing, production optimization, R&D for drilling, completion and production enhancement based on nano-technology, coiled tubing, matrix acidizing, acid fracture, cementing, multiphase flow simulation and programming.

I am a Bachelor degree holder in Computer Information Systems from Ajman University of Science and Technology in Abu Dhabi / UAE 2002 with excellent Analysis, Developing and English communication skills. I feel that I could be very useful to fulfil the work you are doing within your departments.

Totco Institute of Secretariat Studies .Diploma in Computer Science. Ladoke Akintola University of Technology, Ogbomoso.B Tech in Chemical Engineering Oil and GAs recording Using Oracle Database Programme. Calculation of deferment in Oil and Gas Computation Well Test monitoring and surveillance.

Objectives: As a mechanical engineer I am: - seeking an engineer position in oil & gas Industry - willing to get field experience and use gained knowledge in practice - able to study new equipment and technologies - looking for a new career opportunities

Objective: A challenging and rewarding position in a fast-paced, entrepreneurial corporate environment where my leadership and people skills will be utilized to my maximum potential.

Drilling Fluids Research.

To obtain an entry-level chemical engineering position in the Oil industries sector. Willing to learn and train in harsh condition. Will relocate to anywhere in the world.

C.V Diving supervisor---diving projects rep.

I have work in SICPA Inks Pakistan pvt ltd as trainee production officer. Presently I work in Riaz Engineering works as a design engineer.

Research, development, or technical support in organic analytical chemistry, particularly in the area of quality control or quality assurance [in petroleum or petrochemical products]

I have more than 7 years experience as a UNIX Administrator/Engineer. I have a 'make it work' attitude, and the experience to do it.

CV showing details of precious work experience and personal skills

Objective: To develop the knowledge acquired and apply them in the oil industry, as a Petroleum Engineer.

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

Trade Test Certificate

A qualified Mechanical Engineer with 10 years of diversified experience in Pipeline and Plant Installation and commissioning as well as Polymer production and Structural Repair of components.

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Senior piping designer

Caesar II expert, Piping Design

Production Supervisor ; Production Operator in oil & gas industry upstreem & downstreem

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

Over 6+ years of Experience as QA, Electrical and Commissioning Engineer in Shipbuilding and Plant Maintenance.Strong Technical Knowledge in all the aspects of Shipbuilding and Commissioning.

AS A CERTIFIED IRCA ISO 9001 LEAD AUDITOR I AM WORKING AS QUALITY MANAGEMENT REPRESENTATIVE AND ALSO I AM QUALITY CONTROL ENGINEER INCHARGE OF MORE THAN 12 INSECTORS AND ENGINEERS WORKING IN CALIBRATION AND INSPECTION. FURTHERMORE, I WORKED IN THE APIQ1 REGISTRATION AND OTHER API SPECS AS API6D

BE Chemical + MTech + 4 Yrs Exp.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

To obtain a position where I can apply my expertise in mechanical engineering to work on interdisciplinary engineering projects such as finite element analysis (FEA), mechanical design, test, vibration and acoustics.

I have more than 7 years experience in Offshore and onshore rigs in Pearsian Gulf and west and south of iran as drilling supervisor in Exploration, Workover and development wells and 1 year in AFD project as drilling Engineer, I familiar with high tech drilling tools such as power drive, auto trac

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

More than 6 years of working experience as Piping Designer (PDS) in the field of Oil and Gas, Refinery and Petrochemical Industries. Job involved preparation of Piping and Structural GAD & Isometrics generation using Plant Design System (PDS) and CADDWorx Software Packages.

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

Instrumentation & Control Engineer with over 14 year experience in Basic & Detailed Engineering, Supervision, Commissioning of off shore / on shore fields. Profitional in Field Instrument, DCS, Automation, HV/LV Elect Switchgears.

Structural Engineer

structural design engineer with 2 years and 6 months experience

WORKED IN PEB( PRE-ENGINEERING BUILDINGS), CONCERETE STRUCTURES( BUILDING , EQUIPMENT FOUNDATION etc), STEEL STRUCTURES( BUILDING,PIPE RAK, CABLE TRAY, PLATFORMS, PILING ) SKILLS - STAAD PRO, ANSYS, DYNA -5 , S-FRAME , S STEEL, MSA,

Quality Assurance/Quality Control, Audit, Inspection & Testing, Welding, NDT

Post graduate Engineer with experience in marketing, engineering, insurance survey.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 [ 85 ] 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out