Resume - Project Leadership: project development, estimation, engineering, installation,...

Misco Jobs

Resume #72327

CONTACT INFORMATION:
View contact information...

Licensed Electronics and Communications Engineer
Professional Regulations No. ECE 16606

SUMMARY

Project Leadership: project development, estimation, engineering, installation, field start-up and commissioning.
Project Engineering: instrumentation and control projects, distributed control systems (DCS), programmable logic controllers (PLC), human machine interfaces (HMI), Nuclear Detectors, system interfaces, Fire & Gas and Cathodic Protection.
Industrial Academe: Electronics and Instrumentation and Control

EDUCATIONAL BACKGROUND

Licensure
Licensed Electronics and Communications Engineer
ECE 16606
Professional Regulations Commission ( Philippines)

College

Course: Bachelor of Science in Electronics and Communications Engineering
School: Polytechnic University of the Philippines
Inclusive Dates: 1992 - 1997

WORK EXPERIENCE

2007 - Present Petrofac Facilities Management
Dubai Petroleum
Senior Instrument Engineer

ƒæ Develops specifications for field instrumentation.
ƒæ FEED and offshore surveys
ƒæ Reviews detailed specifications to assure conformance to all applicable codes and standards.
ƒæ Prepares requisitions for all instrumentation.
ƒæ Preforms technical bid analysis for all instrumentation.
ƒæ Reviews vendor data for conformance to specifications.
ƒæ Develops Instrument Schedules and Index.

2005- 2007 Al Yusr Townsend & Bottum Qatar Co. Ltd. (AYTB)

Client: Qatar Petroleum, GTC-109/MCD/04 AND LTC/056/03
EPIC for Implementation of Minor Modifications in the Dukhan Fields and Replacement of Obsololete Junction Boxes and Associated Instrumentation Cables
Senior Electrical and Instrument Engineer

ƒæ Responsible for planning and coordinating the technical design, engineering implementation and commissioning of the project work.
ƒæ Estimation of E&I Tenders and bids includes project review, materials specifications review and related engineering modification and suggestions and tendering.
ƒæ Overseeing the activities of the E&I group from a scheduled work and assess its day-to-day progress on instrumentation, electrical, fire and gas and CP works.
ƒæ Supervising the engineering for E&I activities on assigned projects, proposals and studies. This included, but was not limited to, manpower scheduling and control, the development of P&D, loop and location drawings, installation details and instrument selection and commissioning.
ƒæ Develop Pre-commissioning and Commissioning Checklist for the projects

1999 - 2005 Al- Suwaidi Industrial Services

Al-Suwaidi Trading & Development Co. Ltd
Senior Project Electrical and Instrument Engineer
( November 25, 2004 - March 22, 2005 ) Projects

ƒæ Tapped as a permanent replacement for the outgoing Project Superintendent.
ƒæ Projects mainly involved project estimation, project overview, installation and commissioning of Ohmart Nuclear Detectors in various SABIC Affiliates kingdom wide.
ƒæ Responsible for planning and coordinating the technical design and engineering implementation of the project work.

Client: Saudi Aramco, 5 Additional Capacities Bulk Plants, KSA
Project E&I Engineer (January, 2002-Novemember 2004)

ƒæ Lead Engineer overseeing the Terminal Management Systems construction design, installation, and testing /commissioning of instrumentation, safety, and control systems for the Diesel and Gasoline Loading Islands and Tank Farms for the five Bulk Plant projects.
ƒæ Responsible for planning and coordinating the technical design and engineering implementation of the project work.
ƒæ Assisted with the commissioning activities for Radar Tank Gauges, Siemens TMS, Fire Alarm systems, Switchgears and other electromechanical equipments as used in the five bulk plants.
ƒæ Developed the project handling capabilities of the instrument section within the TMS engineering group and provided technical support to the field operations. Implemented a number of small on-site modifications to boost system works in addition to running a number of field development projects using outside contractors.
ƒæ Lead engineer supervising the engineering and drafting activities on assigned projects, proposals and studies. This included, but was not limited to, manpower scheduling and control, the development of P&D, loop and location drawings, installation details and instrument selection.
ƒæ Supervises and adequate number of E &I foreman and technicians in installation and commissioning of field instruments in the Five bulk Plants. Thus these includes the installation of all wiring and termination from the field going to the control panel.
ƒæ Assisted in the material take-off and procurement plan for the project.

Client: Saudi Basic Industries (SABIC), Riyadh, KSA
Instrument/DCS Engineer (September, 1999- January, 2002) Maintenance

ƒæ Developed and implemented construction of new Reactor for Polyethylene Plant by integrating Fisher Rosemount Delta V for process monitoring and gas chromatography analyzers. This includes liasing with vendor regarding design and configuration of the system, Modbus interfaces to Allen Bradely PLC, training to users and start-up.
ƒæ Developed and justified controls upgrade project for the existing Linear Alpha Olefins Plant, including identification of profit improvements, design of advance control strategies, and project justification. Supported plant during this period with measurement and control issues.
ƒæ Assisted and take part in coordinating and reviewing the contractor's design, installation, and testing of instrumentation, safety and control systems for SR15M PVC plant extension.
ƒæ Established and performed the Preventive Maintenance Program for both the Yokogawa and Rosemount Distributed Control Systems (DCS) in PVC, EPS, LAO, PE, and PPCAT control rooms.
ƒæ Executed the overall troubleshooting for the Distributed Control Systems and Electronics Equipments used in the plant as instructed by the direct supervisor.
ƒæ Prepares turnaround and modular shutdown plan and material requirement for instrumentation and control systems.
ƒæ Provides the functional support for the Engineering Group in the control system's modification and commissioning processes.
ƒæ Provides recommendation and suggestions regarding Distributed Control Systems improvement and efficiency.

1997 - 1999 Procter and Gamble Philippines Incorporated
Instrumentation and Process Control Engineer III / Technical Training Engineer

ƒæ In-charge of all maintenance and operational system program of Allen Bradley Programmable Logic Controllers (PLC) and all installed Field Instruments used in the manufacturing plant.
ƒæ Established and organized maintenance programs as well as manpower supervision and distribution. Performed daily site inspections and monitoring of control systems and field instruments. Attained all system troubleshooting and repair to avoid loss time or production loss.
ƒæ Execute up-grading with the latest design applicable in the system. Performed activities such as installation of additional units or components in the distributed control system.
ƒæ As a member of the E&I team of the plant, discussed relevant matters such system breakdowns encountered particularly in changing of parameters.
ƒæ Performed plant preventive maintenance of high-speed equipments that are used in manufacturing process.
ƒæ Was involved in the designing of the automatic palletizer systems that was used in t he loading and unloading docks.
ƒæ Was involved in the design and implementation of the automatic packing machine used in the synthetic detergents manufacturing.
ƒæ Supervised the implementation of the repair and maintenance of the plant's CCTV, Public Address Systems and Fire Alarm systems.
ƒæ Has been involved in training needs analysis and making various technical handouts for Instrumentation and Process Control, Basic Industrial Electronics, Statistical Process Control, Computer Fundamentals, Total Quality Fundamentals and Industrial Hygiene and Safety Computer Based Training.
ƒæ Has trained more than 200 newly hired engineers in various technical skills such as, Instrumentation and Process Control, Basic Industrial Electronics, Statistical Process Control, Computer Fundamentals, Total Quality Fundamentals and Industrial Hygiene and Safety Computer Based Training.

1995 - 1997 Dynapak Philippines Incorporated
Senior Electronic Technician / Instrumentation Technician

ƒæ Troubleshoots electronic problems in the machines used in plastic making process.
ƒæ Assigned to maintain and troubleshoots problem in the control system and programmable logic controller console.
ƒæ Performed preventive maintenance of control system used in the making of plastic.
ƒæ Performed maintenance and troubleshooting of instruments used in the plant.

SEMINARS AND TRAINING ATTENDED

Basic Offshore Safety Induction & Emergency Training
Gulf Technical and Safety Training Center/ Abu Dhabi, UAE

Radiation Safety Officer Training Course
King Fahad University of Petroleum and Minerals
February 05-10, 2005

Fire Safety and SCBA Training
Saudi Basic Industries R&T, Riyadh, Kingdom of Saudi Arabia
June 22-23, 2003

Work Permit Issuer/ Receiver Training
Saudi Basic Industries R&T, Riyadh, Kingdom of Saudi Arabia
March 15-16, 2001

Server Side Web Page Development
Multipurpose Hall 1, University of the East, Caloocan city
January 11, 2000

Seminar in Mathematics and Science
Pamantasan ng Lungsod ng Maynila, Intramuros, Manila
February 23, 2000

Technical Seminar in Instrumentation and Process Control
Integration of Plant Manufacturing Systems - An Actual Study
The Evolution of HMI
Improving Plant Safety and Availability through Advance Measurement Diagnostics
The Use of Infrared Thermometers in Web-based process
Cooperative Strategy for Autonomous Mobile Robots
Transient Voltage Surge Suppression
Calibration in Aviation
CEMS Dynamic Opacity and Electrodynamics
Vibration and Seismic Measurement Technologies
Philippine Instrumentation and Control Society - Philippine Trade Training Center
October 3-5, 1999

24th Comprehensive Course on Instrumentation and Process Control
Distributed Control Systems
Honeywell
PID Calibration and Tuning
Reading and Designing- Piping and Instrumentation Diagram
Programmable Logic Controllers
University of the Philippines- ISSI
May 1 - 15, 1999

Security Contacts Orientation
Procter and Gamble Philippines In., HRD., Ayala Avenue, Makati City
July 30, 1998

Trainers Training in Electronics Technology
Instrumentation and Process Control
Industrial Electronics
Statistical Process Control
Center for Industrial Technology and Enterprise, (CITE), Cebu City, Cebu
May 1-15, 1998

Total Quality Fundamentals
Procter and Gamble Philippines Inc., HRD., Ayala Avenue, Makati City
February, 1998

Advance Trainers Training
Procter and Gamble Philippines Inc., HRD., Ayala Avenue, Makati City
January 22-24, 1998

Plant Technical Skills Training
Instrumentation and Process Control
Distributed Control Systems
Programmable logic Controllers
Pneumatics and Electro-pneumatics
Industrial Hygiene and Safety - CBT
Basic Mechanical Technology
Basic Industrial Electronics
Basic Motor Control
Process Equipment
Drive Systems
Procter and Gamble Philippines Inc., Technical Training Center, Cabuyao Plant
August 18 - October 9, 1997

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3501 to 3550 of 6411)

Go to Search Parameters...

Brief Description

Process/Production technician qualified to degree level. Operation experience within petrochemical/chemical/oil&gas industries including DCS panel operations.

Labview Programmer

Chemical Engineer with MSc. degree in Polymer Science & Technology

I have 7+ years of work experience in IT as a faculty & administrator. An IT Post graduate and strength in operating IT Training Centre, franchisee development and support coupled with training program in IT, corporate, policy and soft skills like presentation, language proficiency etc.

I finished Masters in chemical and process engineering in Otto-von-Guericke University, Magdeburg, Germany and I did Bachelors in Mechanical Production and Industrial Engineering in Andhra University, India. I am skilled to learn the new things easily and perfectly.

Stress analysed all of the critical piping systems in which are under critical conditions in onshore and offshore projects including PSV''s, piping connected to rotating/static equipments/1200 kW reciprocating compressors, piping subjected to tank settlements, bridge movements and etc.

Control Systems Engineer

Confident and experienced engineering professional.Skilled communicator and determined influencer. Computer literate.

Knowledge in Autocad 14, LT2000, 2002, 2004, Pipe Designer 3D.

I have a stable work history having spent four years working as a Mechanical Engineer within the Teyseer Group in Qatar. I have a broad range of experience including project management, site and field works, tender preparation, etc. On Sep 2004, I graduated as a Petroleum Engg (Masters Degree).

Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.

I am candidate who has excellent research and development skills along with good manufacturing experience.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

With a Hons. Diploma in Civil Engineering, I have totally 13 years of experience , 6 years experience in Large Engineering/Construction, oil & gas & Process Plants related industry and Post Diploma in Computer Application

Dear sir, I would like to submit my application form for the post of the petroleum engineer. Here is my Cv attached below. If you want to know other information or document, please let me know.

Geologist looking for employment in the Oil Industry

Oil and Gas Piping and Ppeline Designer And Expert in all Drawings and Design Related to Pipeline

More than five (5) years working experience in Non-Destructive Testing and Engineering Inspections for Onshore / Offshore and refineries industries. Worked with varios major client e.g Petronas Carigali Sdn. Bhd, Petronas Gas Berhad, Optimal Chemicals (M) Sdn. Bhd, Exxon Mobil Exploration And Produ

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.

Shaped Charge Engineer

Flow Assurance Engineer

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Petroleum engineering with reservoir engineering & field development experience

Knowledge of fire protection systems and maintaining the safety audit system

Bachelor degree in Petroleum and Natural Gas Engineering May – 2007.

GOOD APTITUDE,COMMUNICATION SKILLS,MANAGING SKILLS,TECHNICAL SKILLS

Piping Engg. skills including

Becholar in chemical Engineering (production / project)

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Mechanical piping supervisor

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Autocad & Inventor Draftsman

A Drilling Engineer with expertise in drilling rig supervision, development of drilling, work-over and abandonment procedures. Excellent interpersonal skills combined with the ability to work collaboratively with other team members have been my formidable strengths.

B.E. Petroleum, Working in Workover Department

Diploma In Instrumentation Engineering In Aug 1988 (3 Years Duration) +Amie Eqvt To B.E

DCS Engineer With Yokogawa CS3000 experience

An effective engineer possessing good communication skills, combined with proven technical and organizational abilities. Education, qualifications and experience gained through significant design applications and management positions performed in the US and the Middle East.

Project Leadership: project development, estimation, engineering, installation, field start-up and commissioning.

Electrical and Electronic background. Experience with ESPs, Completions and Production Engineering

Well Service Supervisor or Coil Tubing Supervisor

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 [ 71 ] 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out