Resume - Process sr engineer

Misco Jobs

Resume #72438

CONTACT INFORMATION:
View contact information...

Over Fifteen years of experience as Consultant engineer for the oil, gas and petrochemical industries covering the conceptual, basic and detailed engineering in the utilities area (WWT,WT)
* Define basis of design and design criteria for new facilities.
* Perform feasibility, alternative evaluation and process planning studies.
* Selection of process schemes and process operating philosophy.
* Elaboration of process flow diagrams, including heat and material balance, sensitivity of process operating pressure and temperature, stream analysis and properties.
* Execution of process calculations and simulations.
* Active participation on Process Risk Management to provide discipline input for the Management of Change (MOC) and Process Hazard reviews (PHR).
* Active participation for all process related aspect at commissioning, start up and test runs.
* Active participation for detailed engineering, generate project scope, prepare estimated cost for facilities projects and/or up-grade of existing. Responsibility include de-bottleneck.
* Provide technical and project engineering support to field facilities team. Duties involve interfacing with production and oil delivery team for troubleshooting and de-bottleneck.
* Technical assistance for all production, facilities-engineering issues and facilities optimization

PROFESSIONAL EXPERIENCE

2006. 2008 FLUOR SPAIN. Process Sr. Engineer. Conceptual and Basic engineering for the WWTP (C-10 project-Expansion of Cartagena Refinery)

SINCOR (TOTAL, STATOIL& PDVSA association).

2005. Process senior Eng. Responsible of Performance Test procedures for the Produced Water Treatment Plant (120 MSPD). Conceptual &Basic Eng. for the upgrading.

2002. Utilities process Engineer. Main Shutdown &Debottlenecking project. Conceptual/Basic engineering to upgrade the existing WWTP (Anoxic stage +polishing + desalters treatment 200 MBSPD)

TECHNIP OF VENEZUELA

2002 Process Engineer as WWTP Specialist: Sincor Upgrader (Totalfina Elf &PDVSA association) Waste Water Treatment Plant Commissioning and Start Up procedures. Operational routine, training to operators and hand over of Unit to client. Performance Test procedures.

2001 Packaging Engineer as WWTP Specialist: BP AMOCO&Technip Italy -PTA Projects, Responsible of detailed engineering for the Wastewater treatment facilities ( anaerobic,aerobic,sludge handling units) Two petrochemical plants (PTA) plants located in China&Taiwan

1999 Packaging Engineer as WTP Specialist. Sincor Downstream Project (Total Fina Elf &PDVSA), Responsible of detail engineering of water treatment units for the Downstream facilities located in Jose-Venezuela. Units in charge: Demineralization, Side Filtration for cooling system, Potable water and Separation of Oily wastes.

ORTIZ & MEJIA (Graver Water of Venezuela)

1996/99 Sales Manager. Commercialization of equipment for water and wastewater treatment units in the oil industry by their exclusive representing companies such as Graver Water, Parkson Corporation & Neszcht. Participation in projects BOO & BOT for governmental institutions and PDVSA subsidiaries.

PROYECTA (Parson Engineering Subsidiary)

1995/96 Process Engineer IV. Participated on:
Wastewater treatment for Cardón Refinery. Basic Engineering.
Sulfreen technology for Sulfur plant at Refinery de Amuay. Conceptual engineering.
Osmosis Reverse plant for Venezuelan Navy. EPC contract.

JANTESA

1991/95 Process Engineer III.
Revamp at CD-3 unit-Refinery Cardón, para Maraven. Basic Engineering.
Secondary Recovery with Produced water. Injection of 1.0 MMBWPD at Jusepín Facilities.Corpoven. Basic Engineering.
Sulfur Recovery by modified Claus process. Refinería de Cardón,. Maraven. Basic Engineering.
Ballast water system for Lagoven. Basic Engineering.
Environmental Impact Studies for Pequiven.
El Palito Refinery Waste Water treatment. Basic Engineering.

LUMMUS CREST VENEZOLANA

1989/91 Process Engineer I.
Environmental Impact studies-Corimon Group.
Waste Water treatment for Contrenaca
Sludge Handling-Corimon Group.

EDUCATION

1988 Universidad Metropolitana B.A. Chemical Engineer

1996 Universidad Central de Venezuela Master Degree in Operations Research (*)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 6558)

Go to Search Parameters...

Brief Description

Having strong Process and Operations background, diversified knowledge and experience of Oil Industry for approx. 25 years in Process Engineering, Operation, Projects initiation, Coordination and commissioning, Product and Market Development, Pricing, Techno-Economic evaluation, Client / Customer

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

Experienced with trouble shooting all aspects ships electrical installation and automation, DP Experience

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

painting and insulation supervisor - oil and gas industries

35+ years of multi-disiplined engineering practice, 24 years of direct supervisory experience, in power, petroleum & process industries

Experienced Completing and Producing Petroleum Engineer

An astute techno-commercial professional having 13+ years (of 15+ years) diversified experience in grid connected wind energy sector.

Free! Top-notch Instrumentation Technologist and Process control Team Leader of an US based MNC for the Central Engineering Division in Mumbai to meet the requirement of Asia Pacific and Europe who are pioneer in the manufacture of specialty chemicals with over 18 years of notable experience in the field

High level technical knowledge and understanding of execution methodology on engineering aspect. About 5 years in a QA/QC jobs engage in Power Plant Construction under the management of Japanese Firm. Had a background on Piping/Mechanical Designs using Autocad. Advance computer literacy.

As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability

Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,

Highly qualified, and experienced Fully conversant with all aspects of evaluation and testing of drilling mud. Expertise in testing of all the mud parameters

I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.

Control & instrumentation

A HIGHLY ADAPTABLE CIVIL WORKS AND CONSTRUCTION SUPERVISOR/INSPECTOR

Degree in Mechanical Engineering & PG Dip. in Materials Management. Fully Conversant with the Materials and Maintenance modules of SAP system. Knowledge in materials standardization & cataloguing of upstream as well as downstream companies in Oil & Gas industries.

KEY COMPETENCIES

Extensive experience in commissioning, operation, maintenance and supervision of water treating, steam generation, power generation, and power distribution equipment and systems, and in the planning, design, and project development of electrical equipment in the power, oil and gas industries.

Highly aspiring to Excel in my Professional Career and seeking a Core Organization, which can provide a Motivational ambiance and Exposure to Creative Innovations in Advanced Technologies, where one can grow and benefit the Society Globally.

Expert knowledge in the integration of core and log data to help geologists, geophysicists and engineers be more productive.

I am having 21 years experience (10 years in supervisory cadre)in oil &Gas / Petro chemical / LPG Plant operation and maintenance . Experienced in the installation, maintenance and troubleshooting of a wide range of Power Generation and high voltage transmission equipment, distribution systems

Ram Babu Singh

I have 27 years in Petroleos de Venezuela (PDVSA) specializing in the area of Geodesic and Topography, developing activities related to several petroleum’s operational processes.

Design and Construction supervision experience in connection with Structural Steel Works and Steel Fabrication works using Code of Standard Practice of the American Institute of Steel Construction (AISC, ASTM), Mechanical Piping and Material Take-off required for Petrochemical Plant, Oil Refinery, P

Senior geophysicist, SMT and geographix work station expert,offshore data experience throughout world

Gradute chemical engineer

A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

Significant experiences in analytical and computational modeling in both structural and thermal-fluid areas. Working on offshore engineering design in shallow and deep water, which includes subsea pipeline, riser, and stinger design.

Project engineer with management skills

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

B. Sc – Engineering – Electrical & Electronic, Skill : · Trouble shooting, PLC programming, AC/DC VFD commissioning, Soft-starter,Experience in design review, erection, execution Plan, progress monitoring, punching-listing of Electrical, instrumentation, mechanical completion thru to commissioning,

Skills : Structural Analysis & Design with help of Engineering Software qualification : Master of Engineering (Civil) Specialisation : Structural Engineering

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

Process sr engineer

Over 18 years experience in Natural Gas Engineering Field including research, planning, route survey, design, implementation, installation, testing maintenance and supervision of Gas distribution and transmission line to Industrial, commercial and domestic connections under American standards and sp

DSV with over 20 years experience.

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Involved for more than 19 yrs in structural work related to oil and gas industry. Basic/Detailed Engineering, Installation Engineering and integrity assessment of Fixed Offshore Structures (Both jacket and topsides). Familiar with structural analysis programs like SACS, ASAS, SESAM, GRLWEAP, etc.

Plant inspection: with API 510, 570, 653. adttional qualification in welding inspection

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out