Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #72447 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE
A challenging plus rewarding career, offering possibilities of growth and advancement. I am interested in any field position and will travel and or relocate as needed. I look forward to new and exciting opportunities.

EDUCATION
* Petroleum Chemical Degree – Houston
* Petro-Chemical Instrumentation Courses – Pasadena
* Houston Area Council Safety Courses / Including Confined Space, Supplied Air, PFT, Equ-LPO, Respertory, and BH reference.
* Accounting / General Studies – San Antonio

EXPERIENCE

Alpha Leak Detection Kemah, TX

Pipeline Technician
* Ran and maintained a wide variety of projects involving different sized pipelines with an extensive selection of such products including, Crude, Anhydrous Ammonia, Oxygen, Nitrogen, Natural Gas, JP5, LPG, Water, and so on.
* Learned and have since kept up to date with DOT regulations for the different types of products.
* Preformed leak surveys, maintained valves, risers, and stations, cleared and mowed ROW's, oversaw the One Call and cathodic protection, for several Company's while abiding by all safety and DOT regulations.
* Preformed many Leak Detection surveys using SF6 gas, also preformed many hydro pressure test while using this product.
* Calculated all flow rates, while determining the different variables, needed for the displacement.
* Implemented a data base for 180 mile stretch of Tejas Gas pipeline. This is still being used by the employee's and contractors.
* Oversaw and directly participated in some of the largest and most impressive Electronically Pigging projects in the North Western States.
* Directly participated in the revisement of blueprints and other data resources with GPS coordinates.
* Created specific spreadsheets designed for the Maintenance and Contracting personnel, which in turn sped up productivity resulting in higher profit margins.

Working Shutdowns for various Contractors

J V Industrial – TX
* Materials Handler
* Fire / Hole Watch

StarCon – TX
* Materials Handler
* Timekeeper

Zachary – NE
* Pipe fitter Helper, Fire/Hole watch, and Quality Control.
* Timekeeper
* Implemented training courses for the field crews.

Eclipse, USA Webster, TX

Project Technician
* Surveying and marking all locations with Timble GPS receivers, MetroTech and Fisher line locators.
* Site Plan Surveys, Boundary Surveys, Control Surveys, and Construction Surveys.
* Maintained all Insurance accounts including Workers Comp and Unemployment issues.

INTERESTS
South-Land Rodeo Board of Directors, Barrel Racing, Roping and all Fishing and Hunting activities.

REFERENCES
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 3951 to 4000 of 6411)Go to Search Parameters...
Brief Description
Seeking a position as an executive with responsibilities for better performance, skills improvement and emphasis on environment for teamwork for company as well as personnel growth.
A Process Engineer with 2 years oil and gas experience covering appointments in operational support, offshore operation and engineering design. Demonstrates first-class academic results alongside strong problem solving and communication skills.
I am currently a Reservoir Engineer working for an engineering firm in Houston, Texas. I graduated from Petroleum Engineering at the University of Alberta in May 1999. Academic qualifications include a GPA of 7.75 out of 9.00 in the year of my graduation.
It is the summing up of what I have done in my career till today.
A qualified Engineering (Electronic Instrumentation & control) professional with core strength in the area of automation.
CV
Chartered Staff Process Engineer with over 5 years experience covering North Sea Oil & Gas Production and UK Refining. Currently responsible for both short and long term process optimization for a Chevron Texaco Platform.
Dear Sir, APPLICATION: DRILLING ENGINEER EDUCATION LEVEL: UNIVERSITY DEGREE COURSE/ CERTIFICATE: BSC MECHANICAL ENGINEERING EXPERIENCE: MOBIL PRODUCING NIGERIA - DRILLING ENGINEER
Breakdown Quantity for Project Construction, Mining and Project Control specialist.
SCADA/Automation/Electrical and Controls Engineering Management
Chemical Enginering, Refineries, Process Eng., Production, Gas, & Quality Control
Science Chemistry graduate with total 18 years experience in petroleum field in Quality control & operations. Last 12 years in Gulf countries as Petroleum Inspector- Chemist Surveyor in Marine cargo inspection business.
I am skilled in an oiled servicing company and I hold an ND in electrical/electronics engineering.
As an experienced civil/Building engineering (more than twenty years) I am willing to participate in your construction projects.
Respected Sir > I am BTech in Chemical Engineer as well as Diploma in Petro-Chemical Technology. Having 2 + years of Gulf Sales experience in the Oilfield Industrial product& equipment
I have completed three years diploma in chemical . and now i work in pakistan oilfield as plnt operator last three years. and now i want join internationl level compane
Instrument Technician
Field Engineer, Strong Electrical Background
I Have 4 years of exp in design of diesel engine power train components in reputed R&D AVL Technical center,Having good knowledge in PRo-e,got 1 year special training in Graz Austria on engine design
December 2000 to 2003 Field technician in the field of power system protection. Power Industry.
B.E mechanical + piping in petrochemical /power plants + service of diesel engines + autoCAD
Certified Tester and a Bachelors Degree
Chemical Engineer with 08 Yrs Exp. in Operation/Technical Sevices/Project Execution-Erection,Commissioning and Start Up
Piping Designer
Knowledgeable in electrical technology 1&2, Three phase AC machine, Overhead line system, Electrical motor & controller, PLC, Power Supply Unit, Main Switch Board, AC Generator, Power Electronics, Electrical Sub Station,Fire Alarm System, High Voltage Underground Cable.
You can rest assured that I am mature, organized, self-motivated and possess good communication skills in my daily task activities
I consider myself responsible, available, an esaygoing person at the sometime i serius in job and my personality and i like to be sociable
service engineer with six years experience
SADRA Shipyard at Neka-Iran-Caspian Sea Manager of Planning of the Projects Work Schedule for the Khazar Semi Submersible Drilling Unit,(Project value: USD 300 million)&Oil tanker 4800dwt&Tug boat1200&4400hp&Sincro lift(Capacity3000t)&Oil storage tanks Capacity9000&6000m3)&Cutter Suction Dredger
I would like to apply with your organization for the position of an Offshore Telecommunications Specialist where I can use my extensive background and significant experience to help you obtain your company's mission.
Over 10 years of oil field production experience. With expertise in the following: supervision, operations, acidizing, fracturing, maintenance.
Engineering Professional with over four years experience in the oil and gas industry in reservoir development with expertise in the design, execution and evaluation of production projects
I have been working in this field for over 10 years now. Done work in both maintenance and construction in the past. In dealing with the Start-up/Commissioning of various projects, I have gained knowledge of Computer control systems, DCS, PLC, Pneumatics and dealing with customers one-on-one.
Background in OLGA modeling of subsea tiebacks and dry trees. Analyzed steady-state and transient multiphase flow fluids through wells and pipelines. Posses a good understanding of wax deposition and gas hydrates in flow lines.
OBJECTIVE I would like an opportunity with a world-class operation in which I could utilize my experience with advance technologies and modern production methods to achieve the profitability, quality and service goals of the organization.
I am a young, dynamic, confident result-oriented and self-motivated graduate of Chemical Engineering with two years of experience in the Oil and Gas industry.
engineering in dcs and plc system specialy YOKOGAWA CENYUM CS et CS3000 Prosafe PLC and APACS DCS of MOORE. GE MARK V and SUVIMAC II+
Over 5 years experience in Steel Structure
I got extreme training in Radiographic , Ultrasonic, MagneticParticle, and PenetrantTesting. I have 3 years of experience in Ultrasonic Testing Level II (UT).
Currently in Drafting and Design program @ ITT Tech. Over 10 years in QA & Document Data Control
All aspects of pipeline operations, surveying, vast array of computer knowledge
I quickly learn new concepts, am proficient at multi-tasking, work well under pressure, and communicate ideas clearly and effectively.
I hold MS degree in Environmental Eng and a BS degree in Civil Eng. I have hands on experience in implementing & leading ISO 14001 EMS, waste management, environmental audits, inspections, monitoring, risk assessments, EIAs, remediation studies, and for the last 6 years working in Oil & Gas industry
I'm mechanical engineer, I also have a mention in petroleum engineer, I did my practices in companies such as Repsol YPF, Pacifpetrol S.A, and I did visited Weatherford to get information for my thisis of degree.
Having Diploma(3 years) in Instrumentation Engineering with 8 years Exp. in Oil/Gas field (Offshore / Onshore) projects, commissioning, maintenance.
I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.
Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.
Free! i am a qualified Chemical and petroleum engineer with a masters degree, with upto 2 years experience in the exploration and production sector of the oil and gas field both in the field and design while using various softwares.
Geodetic Engineer exposed to various types of horizontal and vertical survey and can handle different geodetic engineering position.
Qualifications: Teesside University: 1st Year HNC Instruments, Cleveland College: BTEC National Cert Engineering, BTEC First Cert Engineering.
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   [ 80 ]   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com