Resume - 7-years High School. Experience covers surface and subsurface production mainten...

Misco Jobs

Resume #72547

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
I am now seeking a challenging and rewarding position similar to my previous ones where I can put to good use my over thirty years of experience to assist any corporation in achieving its goals while at the same time continuing my career with good earning potential and possibilities of future advancement.

SUMMARY OF EXPERIENCE:
- Commitment to Safety Management Systems including Permit to Work, Emergency Response Plan and Job Safety Analysis.
- Developed, initiated and implemented routine, preventative and predictive maintenance schedules for all equipment under my purview.
- Initiated and executed short and long term projects designed to enhance drilling and production facilities and equipment usage.
- Developed budgets for fiscal periods inclusive of operating and capital allocations and monitored expenditure to prevent overruns.
- Developed departmental organization structures through recognized manpower requirements and optimization of manpower usage, conducted annual assessments on subordinates and made recommendations for/initiated training, where necessary, for their development/progress.
- Conducted optimization of field and process facilities, production maximization and prepared and submitted all production reports, recommendations and final evaluations.
- Investigated failures and problems associated with production and maintenance operations and developed corrective measures on the principle of diagnostic recommendations and solutions.
- Efficiently and effectively managed the maintenance of heavy industrial and process equipment inclusive of mechanical, hydraulic, pneumatic and electrical systems. Extensive experience in the maintenance of land drilling and well servicing rigs, centrifugal and reciprocating pumps, compressors, beam pumping units, P.C.P's, miscellaneous drilling and production equipment, transport fleet (light and heavy}, onshore and offshore oil production facilities, etc.
- Supervised pre-fabrication and assembly of plant-piping from interpreting blueprints to commissioning. Fabrication and installation / repairs of inter / intra field trunk piping.
- Designed and supervised layout of intra/inter field piping for steam generating systems, water flooding, industrial water and oil transfer in accordance with API and ANSI standards.
- Supervised construction and installation of gas sweetening system for removal of (H2S).
- Supervised the construction of tanks, ring beams, pump and compressor foundations and all other mechanical and civil works associated with oil and gas production, storage and transfer.
- Prepared infrastructure for reactivation of idle wells which includes testing, pumping and bulk storage facilities.
- Conducted topographic survey and general preparation and construction of well locations, access roads and bridges for drilling rig intervention.
- Mentored and trained craftsmen and supervisors in the various aspects of the maintenance and construction of oil and gas production and drilling equipment and facilities.

CONTRACTS:
- Initiated and executed major and minor contract works on field installations from preparation of initial scope of works to commissioning.

PROJECTS:
- On behalf of oil companies, conducted site visits and prepared all relevant documentations to execute proposed work in a safe, cost effective and timely manner
- On behalf of contractors, attended site visits, prepared bid documents, work schedules etc. and supervised and managed projects to completion and/or commissioning e.g.
UMLE Project, Petrotrin F/R, Trinidad.

EMPLOYMENT HISTORY:

Nov 07 – Pres.
Mechanical Superintendent – Drilling International Service and Supply Company Ltd, Trinidad
Jan 07 – Oct 07
Tutor / Consultant in the maintenance field for Drilling Int'l Service and Supply Co. Ltd and Damus Oil, Trinidad.
Nov 05 – Aug 06
Petrokool (Drilling Contractor) – Drilling Rig Maintenance Supervisor.
Mar 05 – Oct 05
Project manager – Land and Marine Contracting Company Ltd - Trinidad.
Projects: Fabricated, installed and commissioned oil and gas storage and transfer facilities.
Laid, supported and commissioned 3 miles 8" dia. crude oil trunk line through forested area.
Replaced sections of corroded and ruptured, buried 10" L/P gas line.
Feb 00 – Sep 00
SADHNA Petroleum Services Co Ltd.
Drilling Rig Maintenance Supervisor – 24/7 maintenance of land drilling rig - Trinidad.
Mar 95 – Feb 98
PETROTRIN
Field Maintenance Superintendent (E & P)(Ag)
Responsible for the maintenance of entire E&P field and included mechanical, civil, electrical and HSE departments.
Trinidad
Mar 86 – Feb 95
PETROTRIN / TRINTOC
Field Maintenance Supervisor (E & P)
Responsible for installing and maintaining all surface equipment, facilities and other infrastructure in oil and gas exploration and production in various fields over the stipulated period - Trinidad.
Jun 83 – Feb 86
TRINTOC
Trainee Supervisor (Exploration and Production)
Mar 80 – May 83
TEXACO Trinidad Inc.
Student Technician (Exploration and Production Dep't)
Oct 76 – Feb 80
TEXACO Trinidad
Refinery Operations- Plant attendant.

ACADEMIC AND TECHNICAL EDUCATION:
- Mechanical Engineering Technician – San Fernando Technical Institute (Trinidad)
- General Certificate of Education "O" & "A" levels – Naparima College (Trinidad)

WORK-RELATED TRAINING:
Drilling and Production Trainee - TEXACO Trinidad INC.
Engineering Trainee - TEXACO Trinidad INC.
Supervisory Training – TEXACO and TRINTOC.
Pump Maintenance - ROOKS Oilfield and Engineering Supplies Limited.
Employee Assistance Outreach program – TRINTOC.
Lubrication of Machinery – TRINTOC.
3D Supervisory Effectiveness Seminar – TRINTOC.
Project Management for Supervisors - S.J. Management Services
Oil Analysis for Predictive Maintenance - Metal Industries Company Limited

SAFETY:

- Recipient of a twenty-two (22) year Accident-free PETROTRIN award.
- Defensive Driving, First Aid and CPR.
- Petrotrin's in-house training as Safety Officer.

COMPUTER SKILLS:
- Working knowledge in Microsoft Office suite {certified}.

OTHER:
- Ability to interact with other professionals and craftsmen for the expedient and safe completion of assigned work.
- Natural Team leader and Team player.
- Willing to relocate.
- Available at anytime with one month's notice.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5501 to 5550 of 6411)

Go to Search Parameters...

Brief Description

Conducting procurement, sales and foreign purchases of Zagros Methanol producing Company (Mega Methanol Plant)in Assaluyah

mechanical engineer having knowledge of AUTOCAD, IDEAS, CATIA v5

Certified civil engineer with a strong background in oil & gas, industrial, building projects

AT PRESENT I WORKING IN DUBAI ELECTRICITY AND WATER AUTHORITY ( DUBAI GOVERNMENT SECTOR) AS A ELECTRICAL SUPERVISOR . I HAVE 11 YEARS EXPERIENCE IN INSTALLATION & MAINTENANCE OF ELECTRICAL WORK ,CONTROL & MONITORING CONTROL OF CONTRACTORS WORK.

licensed automotive technician(redseal endorsement)other skills, welding, autobody, automotive electrical

I can work with any environment

Civil / Structural Engineer, Project Engineer

I have 8 Years exp in Oilfields & industrial: as an instrument forman to maintain all process erlated instrumentation works includes automation

QA/QC in Air cooled Heat exchangers, Boiler,Structurals, Wind mill tower, Mines equipments,etc..

Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,

PROCESS AUDITS/TROUBLESHOOTING,PROCESS OPTIMIZATION ,PROCESS PROJECTS,• Exp. in Project management - Erection and commissioning of 320 KA Pot room.

BSc (Hon) Mechanical Engineering; 3yr part time MBA, only report submission pending . Primary skills & experience include: Project Management, Engineering, Business Development and Relationship Management, Procurement Management, Financial Management, Health Safety & Environment, Engineering Design

Providing technical review and recommendation for peers. Knowledge in Project Managemant, HYSYS. Training in ISO 9001:2000, OHSAS, ISO 14001:2004

Chemical engineer seeking new oppertunities

S.S.LC. From Board of Kerala

Vast Experience in Document Control, Administration, Human Resourses and IT

I have previously worked as a Mechanical Engineer for a Japanese EPCC Company (Shinryo Malaysia Pty Limited) for five (5) years specializing in Quality Assurance / Quality Control. My last project for Shinryo Malaysia was for Malaysia’s largest Oil & Gas Company Petronas in Helsinki, Finland.

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

Civil, heavy, industrial, International, Construction

25 yrs mining experience. Engineering. Operations. Supervised heavy equipment. Team player. Give job 100%. Quick learner. Show respect to all individuals. Represent employer with professionalism. Impeccable attendance & safety. Open to international positions

I have had experience in most forms of drilling, workovers and stimulation. I have limited coil tubing experience, but have a good working knowledge. I am used to working overeseas with people whose first language is not english.

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

GIS analyst , GIS Developer , GIS Trainer SDE administrator , GIS Data manager

Professional Engineer, MBA, offshore oil & gas, Quality management, 11 years

Extensive experience in supervision and inspection of structural and architectural works for high rise buildings, residential, commercial, industrial, roads and bridges and large infrastructure with an over all responsibility for successful and timely project delivery

This is Rishikesh D from CHENNAI - INDIA, working in Ford India having 5 years Experince in Maintanence Field. Knowledge about breakdown maintanence, Preventive Maintanence, Predicitive, Condition monitoring, TPM systems and exposure in hydraulics, Pneumatics, Bearings and effective communicator

Professional Qualification: Bachelor of Engineering (Mechanical); Gulbarga University, Gulbarga. Year of passing Oct. 2000 With the aggregate of 78%, First Class with Distinction. Worked as Junior Erection Engineer for Power Engineers Under 2x25mw Wadi Power Plant

MIT educated program manager/engineer seeks full-time employment in engineering, financial modeling/investing, or engineering management involving optimization, system identification, simulation, graphical user interface design/implementation, and/or control system design/analysis.

A competent and enthusiastic hydrogeologist with 4+ years of experience in the field of earth science. Specialises in dewatering, recharge and groundwater management projects. Has experience in project management, river basin management plan, drilling and pumping test supervision,

Systems Engineer - Project Planning & Control Specialist. Oil & Gas / HVAC / Construction

Hand and computer skills+designs, calculation and workshop drawings+site coordination

Computer software as: Office - AutoCAD- mechanical desktop - working model + fluent in speaking, reading, writing English & Turkish + Farsi is my native language+ Azeri is my mother tongue

I am a Chemical Engineer with Masters in petrochemicals and polymers. Problem analysing and solving capabilities supported by strong technical background and enhanced by effective communication skills are my major competencies.

Project Management, Telecommunication

Diploma in Chemical Engineering and 11 yrs. of experience of refinery and petrochemical plant operation as a field/panel operator.

Skills in various disciplines such as Welding Inspection, Plant Inspection which includes static equipments and piping, Material Testing, Failure Analysis and Lifting Inspection.

Entry Level mechanical engineer

QS/ISO 9000, FMEA/ Control Plan/PPAP

Professional Engineering,construction & Commissioning of electronics and pneumatic Experience types of instruments such as transmitters, pr. switches, control valves, RTD's Leveltroll, I/P converters, mass flow meters,

Planning & Coordination Engineer

I have over 19 years of experience working in the Petroleum Pipeline Industry doing a variety of roles. Until very recently, I have been on a special assignment as a “Lead Project Inspector” on a new Pipeline Delivery Facility, but also have other additional managerial & supervisory responsibilities

Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation

Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance

Hands-on skill in Allen Bradley PLC, SLC, Panel Builder 32, RS logix, Frequency Drives,HMI software, SCADA-DCS, Industrial Mechanics and in Broadcast Transmitter.

Bachelor of Engineering (Electronics & Instrumentation) & Master of Technology (Process Control & Instrumentation). Experience in Advanced Process Control & Instrumentation. Total years of experience: 3 Years

Electrical, Instrumentation, SCADA

7-years High School. Experience covers surface and subsurface production maintenance operations, onshore and offshore facilities’ maintenance, engineering projects execution, drilling equipment maintenance, planning and training aspects in various supervisory and management roles.

2 years experience in power plant chemist, 3 years experience in industrial water treatment, well known water chemistry and corrosion chemistry, process and troubleshooting

Health safety and environment officer

Mechanical Engineer with 16 years experience in Saudi Arabia, Abu Dhabi, Malaysia, and India. Working in Oil and Gas Industry and Power Plant Construction / Commissioning and Maintenance.

First Prev 101 102 103 104 105 106 107 108 109 110 [ 111 ] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out