Resume - Instrumentation, Automation, control & electrical engineer with 3 years experie...

Misco Jobs

Resume #72565

CONTACT INFORMATION:
View contact information...

Experience
* Dates (from – to) January 2006 -Up to now

* Name and address of employer SCCT (Suez canal container terminal) Port Said, Egypt MAERSK, APM terminals

* Occupation or position held Electrical & Automation Engineer

Main activities and responsibilities
1- Working on a shift roaster as Electronic Shift engineer.
Make the required troubleshooting & PM for all kind of the STS (Noell &,ZPMC), RTG(Noell, ZPMC) & reach stacker, empty handler Straddle carriers, Road Heads, Forklift trucks, trailers and other associated equipment.
2- Working on all kind of generators
3- Managing, designing the required instrumentation projects for the plant.
4- Programming, installing, maintenance for: -
PLC (SIEMENS SIMATIC). Step 7
Drives (DC drives SIMOREG)
Drives (AC drives SIMOVERT).
PCS7, HMI, OP17 etc& design the required SCADA project with WINCC
5- Working on medium tension switch gear ABB type
6- Organizing required Electrical Preventive maintenance & Corrective maintenance
7- Faults & errors troubles shooting
8- Installing & programming for different types of position & incremental encoders.
9- Installing/programming / maintaining the DGPS system which used for auto-steering/container tracking system
11--Share at team of acceptance and commission of some devices (spreaders, RTG crane, man lifter …………)
12- Testing incoming store device and reporting its availability
13-training electrical technician staff "Programming PLC"

Education
Certificate: B.Sc in Electronics and communication engineering
: El Mansora University at 2005
Grade: Very good 77%
Project: Wireless control in robotics
Grade: excellent 100%
Another certificate: Diploma in spreaders from BROMMA university at 2006 Subject of diploma Hydraulic control of spreaders
Another certificate Profibus installer certification http://www.procentec.com/cpe/certified-list.php3

Training and certifications

A -Technical training in automation and control system
1-Certification in PROFI_BUS installer http://www.procentec.com/cpe/certified-list.php3
2- Basic& Advanced courses in TCC in hydraulic 2 week
3- Basic& Advanced courses in TCC in siemens PLC 2 week
4 - Training TLWTC Maintenance under high voltage 3 months
5- Fertilizer factory at talkh two month

B -Technical training in repairing communication system
6-Goldy factory IEP (International Electrical Product) for electronic communication devices two month
7-El Alamia maintenance center six month
8- Land mark maintenance center two month

C -Technical training in repairing biomedical system
9-UROLOGY&NEPHROLOGY CENTER for three months
10-Spectra Groups for instruments of blood disease
D –Business training
11- Communication skill 2days
12- Business writing 2days

E –International deign festival participating
13- Share at robocons festival
14-Supervisor and Trainer in club science of El Mansoura University
15- Share at week of universities

PC soft
* Adobe Photoshop, Premier, After effect 4.2
* 3D MAX
* Visual Basic 6

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5501 to 5550 of 6635)

Go to Search Parameters...

Brief Description

Experienced in design & engineering - feasibility, conceptual study, basic and detail engineering, project management(EPC,EP,MC,PMC), proposal preparing, in the field of oil and gas and petrochemical industry

B.Sc Engineer in Metallurgy & Materials Science with 10+ years experience in Quality and HR department

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Logistics ILS Provisioning LSA LSAR LMI Contract Mil-Std-1388-2B

Diploma in Mechanical Engineering

I am graduate and have a diploma of instrumention and process control with 9 years exp in diffrent industries

Facility Manager

Instrumentation, Automation, control & electrical engineer with 3 years experience

My skills and qualification are exemplary

Lead Drillig Fluids Consultant internationally for the past 6 years. Worked with the following operators: BPTT;TOTAL ; Maersk; Exxon Mobil;Rasgas. Worked with both oil and water based fluids.

Senior painting inspector (c swip grade 2)

. I am having vast experience (22 Years) in an integrated industry in construction, Projects & Maintenance and in Diverse fields. I am also suitably qualified (BE (M), ME (PROD), DIP. IN MGMT, PGDIT) for taking up any challenging assignment with a rewarding career anywhere in the Globe using the mos

Engineer in Saudi Arabia

i am Associate Engineer

Seeking a position to utilize my Knowledge, communication and leadership skills to the best of my capabilities for the betterment and development of self and my organization.

PLC/FPGA Process Controls Electrical Engineer Allen bradley and Siemens architecture proficent with Control Logix Design Experience.

Junior geologist with one plus year of experience including but not limited to geologic mapping, core and chip logging, soil sampling, drill logistics, and ARCGIS familiarity.

Peter is a highly experienced environmental engineer with significant expertise in oil, gas and mining, regulatory issues, sustainable development, corporate social responsibility and policy development. He is a Chartered Engineer (CEng, MICE), and an Environmental Professional (CEnv, MIEMA)

3 decades of environmental, health and safety experience in the private and government sectors

BE in Electrical and Electronic Engineer. Training in PSS/E Software. Able to perform Load flow analysis using PSS/E software and intepreat result.

Diploma in chemical Technology with 7+ years experience in Various process industries like Petrochemical,chlor-alkali,Soaps & Detrgents,Fatty acid industries, etc.

Proven problem solver with various experiences relating to offshore/marine and onshore oil and gas operations. Over 35 years experience with a major operating company and contract operating company in Gulf Coast oil and gas production operations; possessing strong interpersonal/communication skills

BSc in Mechanical Engineering (UCT) South Africa, Power generation experience (two years & nine months), Cement & Open Cast mining experience (seven months)

5-yr Graduation in Mining-Environmental-Petroleum Engineering, with international studies experiences.

Intenational welding engineer diploma from Austria (IIW)

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

Set-up, operate & maintain Document Control Area required for distribution, storage, retrieval & management of Vendor documents & dwgs, Proj. documents/drwgs; Electronic Document Management Systems Design, Operation & Maintenance; Supervision of Doc. Control Group & Precedures devt./implementation.

Graduate + Diploma in Materials Management, 12 Years exp., working as Purchaser in a Global Leading EPC Company in Qatar

Today professionals must become part of the company’s teamwork approach to accomplishing projects on time and budget. doing things differently, more effective, or more efficiently. I search for Early Responsibilities, achieve Technical Challenges.

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

Have around 17 years in the area of Industrial & Process Automation including Safety Systems, which involves Study of process, application development, testing and implementing Control systems Software and Hardware

2007 Geology Graduate 2:1 BSc Hons from Imperial College London

GIS Expert (Esri & Geomedia)

Gas Plant Operator

Mechanical Eng. knowledge and experience in auto industry, applicable to other areas of Engineering. Computer software & hardware knowledge including Simulations, FE analysis in PC, Unix workstation. Expert in developing new processes with implementation and training

Troubleshooting

multilingual engineer with significant experience in geographic information system, able to manage from technical components even administrative components, concentrate in the range of prevention, diagnostic, planning, design, assembly, administration and treatment in air, soil, water and territory

Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.

Sound skills on QHSSE matter and Solid knowledge of Chemicals Engineering and wide experience in processing of crude oil and raw sour gas processing (oil stabilisation, gas sweetening and dehydration, liquid-liquid and gas liquid separation).

Logistics Manager, Rig Manager, Materials Manager

Bachelors - B.A., Applied Mechanical Engineering

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

willing to work in a challenging Electrical carrier

DOCUMENT CONTROL MANAGEMENT, PROJECT SUPPORT, TECHNICAL & DESIGN COORDINATION, EDMS..ETC

Bachelors Degree in CHEMICAL ENGINEERING with Masters in BUSINESS ADMINISTRATION. Cumulative work experience of 8+ years in Hydro metallurgical Zinc manufacturing company.

I am a technical leader with experience of start up of automated plants. I have managed 27 maintenance persons in hiring and teaching the neede skills of that facility. I am licensed electrical contractor with two degrees,A.A. computer electronics engineering technology and A.A. mechanical engineer

Laboratory Analysis, Administration, Safety

I am a versatile professional, with experience in Construction and Oil/Gas industries. Have worked under very professional environment both onsite and, management levels. My experience and expertise in the field of management and or site, will be very beneficial for any hiring organization.

CIVIL ENGINEERING; LAND SURVEYING; COMPUTER AIDED DRAFTING (CAD)

ms project,autoCad 2008(2d,Isometric,3d modeling),B.Eng in Metallurgical and Materials Engineering,Planning,cost estimating and control,job schedulling,WBS,manpower and site mobilization,EVA,S-curves,Risk management,Project Evaluation

First Prev 101 102 103 104 105 106 107 108 109 110 [ 111 ] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out