Resume - Bachelor of Electrical Engineering [BE] : 5 Years Hands On Experience in Power...

Misco Jobs

Resume #72603

CONTACT INFORMATION:
View contact information...

Academic Qualification

Bachelor of Engineering [BE]
NED University of Engineering & Technology Karachi
Electrical discipline, first division—March 2002.
Pakistan Engineering council (PEC) ELECT/18124

Bachelor of Science [B.sc.]
University of Karachi
First Division—1996-97

Professional Chronology

Karachi Electric Supply Corporation [KESC]

March 2007 to date—Assistant Manager Grid System Protection.

March 2006 to March 2007—Assistant Manager Network (Distribution) Business Unit

May 2005 to March 2006—Assistant Manager H.T. Network (11 KV Operation and Control)

June 2004 to May 2005—Sub-Divisional Officer (Assistant Executive Engineer)

March 2004 to June 2004— Assistant Executive Engineer

September 2003 to March 2004—
Apprentice Engineer

Yunus Textile Mill [YTM]
July 2002 to September 2003—On Job Training in Yunus Textile Mills (YTM)
Trainee Engineer (Electrical)

Training and Other Practices

1. Local Training in KESC
Departmental training in Network Management, Business Administration, Customer Service Management, Office management and Human Resource Management.

2. PGC [ISP Engineering]
NED University of Engineering & Technology Karachi.

3. System Application Product [SAP-ERP-ECC 5.0]
Plant Maintenance (D) Module
Siemens Pakistan

4. PSS Sincal—Network Planning Software
On-job KESC Training

5. Computer Utility
Well versed in Windows O.S, Microsoft Office, local and wide area networks.

6. Communication Skills
Fluent in written and spoken English and Urdu.

Additional Information

The process of my immigration in Class BN Subclass 136 Skilled – Independent is under-process.

The details of my File Reference is:
CLF2007/140919
ICSE Request ID: 180519123
Case Officer: DONATI, COSIMO - Region 1
Adelaide Skilled Processing Centre
Department of Immigration & Citizenship
4th Floor, 55 Currie Street
ADELAIDE SA 5000, AUSTRALIA

Experiences—descriptions

Karachi Electric Supply Corp. (KESC)

March 2007 to date—Assistant Manager Grid System Protection

Working in the capacity of Assistant Manager (132KV/11KV, 220KV/132KV) Grid System Protection.

* Responsible for on-site testing of Power Transformers up to 40MVA.
* Responsible for rehabilitation of Under Frequency Scheme on 132KVGrid Stations.
* Hands on experience of 11KV Switches and Power transformers on site and at Siemens Pakistan.
* Hands on experience of testing of various instruments and components including C.T's, P.T's, Over current, Earth fault, Over voltage and Under-frequency relays installed in KESC Grid System Protection Network.

March 2006 to March 2007—Assistant Manager Network (Distribution) Business Unit

Served as an Assistant Manager Network (D) at Clifton Network.
* Responsible for maintenance of L.T and H.T network maintenance and Rehabilitation.
* Preparation and implementation of system improvement schemes.
* Load Management of Substations and Pole Mounted Transformers.
* Detection and removal of faults, occurs in 11 KV Network and L.T Network.

May 2005 to March 2006—Assistant Manager H.T. Network (11 KV Operation & Control)

Served as an Assistant Manager (Assistant Executive Engineer) in Operation and Control department.
* Responsible for the Operation and Control of 11 KV Network.
* Load Balancing of 11 KV Network.
* Managing the protection relay operations during the tripping of 11kV Feeders.
* Inspection, Detection and Declaration of faults, if occurred, in 11 KV Network.
* Co-ordination between Generation and Load Dispatch Centre for the management of un-interrupted Electrical Power Transmission and Distribution.

June 2004 to May 2005—Sub-Divisional Officer

Served as a Sub-Divisional Officer in KESC.
* Responsible for customer services management
* Revenue generation, Minimization of losses.
* Office and Human Resource Management.
* Fault analysis.
* Responsible for the maintenance of L.T mains.
* Load Management of Substations and Pole Mounted Transformers.
* Preparation and implementation of system improvement schemes.

March 2004 to June 2004—Assistant Executive Engineer

Served as an Assistant Executive Engineer in department of L.T Network maintenance of KESC.
* Responsible for the maintenance of Low tension (L.T) and High tension (11KV) Network.
* Load Management of Substations and Pole mounted Transformers.
* Fault analysis.
* Preparation and implementation of system improvement schemes.

September 2003 to March 2004—Apprentice Engineer

Extensive training in Power Generation, Transmission and Distribution Network as an Apprentice Engineer.

Yunus Textile Mills (YTM)

July 2002 to September 2003—On Job Training in Yunus Textile Mills (YTM)
Trainee Engineer (Electrical)

Served as a Trainee Engineer (Electrical) in Yunus Textile Mills.
* Extensive training in maintenance of Processing Plant.
* Trouble shooting of Siemens PLC S7/300 based textile machines.
* Erection and commissioning of new processing machines.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 6411)

Go to Search Parameters...

Brief Description

Detail engineering

Electronics & Mechanical Engineering with QA/QC certification

Diploma of Associate Engineer In Electronics Technology(Supervised two shut-down at PARCO refinery in 2002, 2007 & my scope of work covered, Control valves, Compressor, Steam Turbine & high pressure Pumps instrumentation removal, overhauling, calibration check, reinstallation and start-up sport)

Having eleven years experience in field of Oil , Gas & Petrochemical industry

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Passed Matriculation from Bombay Board in English,:Passed Diploma from Kohinoor Technical Institute in Industrial-Elect, Two years course.Attend Safety Training in QATAR GAS, SABIC,ADNOC . HSE Induction,H2S Awareness and Escape. Received Safety Award Certificate from ADNOC on its ongoing projects.

Bachelor of Electrical Engineering [BE] : 5 Years Hands On Experience in Power Utility Company in Medium and Low Voltage System Operations and High voltage 132KV/11KV Substation Protection Systems

Process Engineer, having 2 years of experience in Oil and Gas sector, working in FEED department. Having exposure to Process Simulation tool like HYSYS STEADY STATE HYSYS DYNAMIC SIMULATION, ASPEN PLUS, SULSIM and Equipment Design/Rating Software like HTRI, HTFS, KG TOWER, and SULCOL.

I am presently employed with Black&Veatch, a US based reputed company doing mainly Oil &Gas and EPC projects mainly in power plants.

Process engineer with two years of experience in the feild of basic enginnering, front end engineering design and precommissioning and commissioning of process plants.

Provide day to day on-site supervision of drilling operations to ensure operations are performed in accordance with the Drilling Program in a safe cost-effective manner.I m responsible for Health and Safety procedures being continuously enforced

Development, maintenance and utilization of the full field reservoir simulator

I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.

Total Exp. 2 years. Exploration, Drilling, Workover - offshore and onshore wells. Estimating cost of oprn., coordinating with service providers, supervising drilling operations.

PLC programming, installation and commissioning of motor drives/ process controller and instruments and have expertise in board-level repair of electronics controls and PC board.

•Leadership Quality,•Loyalty with the assigned responsibility,•Decision making •Desire to produce better results than previousability,

Drilling supervision and engineering, well control instructor, rig commessioning

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.

FIELD PIPING ENGINEER - OIL AND GAS ONSHORE / OFFSHORE LEAD PIPING DESIGNER, CHECKER

Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.

TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET

Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.

I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.

Project Management

Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba

SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.

Senior Piping Designer PDS

Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.

Rig mechanic, mechanic supervisor, motorman, diesel mechanic

Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer

Mechanical Maintenance Engineer/contract and Procurement Engineer

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Quality engineer in offshore and onshore fields

Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)

Registered Mechanical Engineer Cert. No.61058,CSWIP 3.1 Cert. No.35530

Electronics Technician / Telecom / SATCOM / Electronic Tools

Specialised in PROJECT & PRODUCTION MANAGEMENT ,QUALITY , MANUFACTURING, HSE

Proficient in CAESAR II, Korf Hydraulics, AutoCAD, Primavera and MS Office.

ESSAR OIL LTD- FCCU (May 2005 to May 2008)

18 years in field operations, management, production engineering, gas processing. tight formations, CBM and shales.

B.Eng(Petroleum Engineering);Diploma(Object-oriented/Scientific programming);Experience in Cementing, Stimulation(CT/N2 jobs),Completions fluids/Wellbore clean-out tools

Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.

Petroluem Engineering

Mechanical / Static / Pressure Vessel Engineer (~5 Years Oil & Gas Experience)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out