Resume - Lead Inspector For Pipe mill team for Kinder Morgan project ,Anadarco petrolium ...

Misco Jobs

Resume #72652

CONTACT INFORMATION:
View contact information...

QA/QC Inspector
___________________________________________________________________________________

OBJECTIVE Aspire to work in a challenging environment, where my progress as responsible individual & growth of organization will go hand in hand

OBJECTIVE Production Engineer specialized in welding/NDT technology/Inspection having more than 1.1/2 years experience in QC / WELDING & NDT activities of Fabrication Industry in the Engineering division sectors, fabrication of piping, various pressure vessels etc. having worked in position QC Engineer

QUALIFICATION

B.E.(Production) 60.66% First Division Dr.B.A.M.U.

CERTIFICATIONS

* ASNT-Level II in following NDT methods.
(a) Radiographic testing (R.T) Interpretation
(b) Ultrasonic testing (U.T)
(c) Magnetic particle testing (M.P.T)
(d) Liquid penetrant testing (L.P.T)

EXPERIENCE

Presently Working with Moody International (I) Pvt. Ltd. As QC Inspector since August 2007.

Inspection for Qatar Shell GTL Limited at AUDCO India Ltd./ L & T Chennai for Pearl GTL Qatar project for inspection of Gate, Globe, Check Valves of different Sizes.

Inspection for Kinder Morgan USA at MAN Industries –Anjar and Welspun-Anjar for Mid-continent Express pipeline Project for the Inspection of 42" Dia 14.1mm WT. API 5L X70 PSl2 and HSAW 36" Dia 12.09mm WT, API 5L X 70 PSL2, 3LPE Coating inspection of 42" Dia 14.1mm WT. API 5L X70 PSl2.

Inspection of API 5L X 60 LSAW (PSL2) PIPES,OD 711.2mm,14mm WT, Coating: 3 layer polyethylene, Quantity: 700 Weters. And API 5L X 60 LSAW (PSL2) PIPES, 711.2mmOD 14mmWT, Quantity: 540 Meters. On behalf of STEMCOR at MAN Industries Anjar.

Inspection for ANADARCO PETROLIUM CORPORATION at Welspun Bharuch for API 5L X 70 PSL2 LSAW PIPES, 30"OD x 11.13mmWT bare pipes.

KEY SKILLS
* Thorough Understanding of international Codes (ASME SEC IX, V, VIII, B31.1, B31.2, B31.3, & B16.5, API 1104, API5L.
* Preparation, approval & implementation of welding procedures (WPS, & PQR) for various ferrous, non-ferrous & dissimilar materials.
* Welding Inspection, Analyze & Trouble shooting of various welding activities in shop floor and site for various piping materials and equipments.
* Review and implementation of Inspection and test plans (ITP)
* Review and approval of various QC/NDT Documentation, Etc.
* Witnessing NDT tests and review of RT Films.
* In coming material inspection, with regards to actual tractability against manufacturer certificates.
* Command on process control
Work Experience: 1 years
Company's Name: Fluid Controls Pvt. Ltd.Mumbai.
Designation: QC Engineer
Duration: Aug 2006 to Aug. 2007

Responsibilities:
* Inspection of Tube Fittings
* Planning of Raw Material as per Order Receipt.
* Follow-up of Raw Material with the Suppliers.
* Vender Development.
* Sending Material for Testing Purpose and Keeping Record of that.
* Making Test Certificates for Finished Components for Clients.
PRESENT
EXPERIENCE

Organization: Moody International (I) Pvt.Ltd.
Client: Kinder Morgan
Project: Mid Continent Express Pipe Line, USA
Designation: LEAD INSPECTOR
Duration: Aug. 2007 to Continue
Industries: Welspun Gujrat, Man Industries Gujrat.

Responsibility:
* Command on Visual Inspection
* Inspection of welding of steel pipes according to WPS at the workshop and field area.
* Fit-up & welding inspection during fabrication as per applicable codes, client specification and related drawing.
* Visual inspection of piping joints from Fit-Up to weld completion stage.
* Monitoring of NDT activities performed by subcontractor.
* Lab Testing

Job Experience: Familiar with various International Standard codes & Specification (ASTM, API, ASTM, etc). Till now visited various Manufacturing Industries and have good knowledge especially in the following area.
. Inspection of Submerge Arc Welded Line pipe at pipe Mills.
. Inspection of Valves (Needle valve, Ball Valve, etc).
. Inspection of Pressure Vessel.

Job Knowledge
* API Auditing with Mr. Don Kemper (Moody USA, API Auditor) For PAN HANDLE Project, USA, at Welspun And PSL Varsana Plants Gujarat.
* Quality Control & Inspection of Submerge Arc Welded & seamless Pipes.
* Quality Control & Inspection of forgings & Casting.
* Quality Control & Inspection of Valves.
* Specialized in Manual & Automation NDT of plates, Welds & Pipes etc.

Implant Training
Successfully completed from 07th June 2004 to 25th July2004 implant training at Bajaj Auto Ltd, Waluj, Aurangabad, Maharashtra.

Personal Profile
* Date of Birth: 11th October 1980 Languages Known: English, Hindi and Marathi.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2901 to 2950 of 6411)

Go to Search Parameters...

Brief Description

3 years diploma in electrical engineering. Skills: involved in commissioning & maintenance of electrical equipment in upstream oil & gas /petrochemical industries.

Proficient in Excel and in Word. Proficient in Primavera Project Planning software.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

B.Eng. Electrical Electronics. CCNA-Abuja,Nigeria. IEEE-USA Member, Networking Telephony/Data, MicroSoftExcel etc, Travelling & Visiting New places

Engineering skills, AutoCad, MS Word

Petroleum and gas engineer.

Mechanical, Estimate/proposal engineer

Chemical engineer from pune university, looking for job in oil field .1 year exeprience in production unit

Highly motivated, creative and versatile chemical engineer with an experience designing refinery plant for a gasoline production from crude oil refineries. Especially skill in optimizing heat recovery by using pinch analysis. Excellent management, negotiation and public relation skills.

Instrument Engineer working in Consolidateed Contractos International company,Qatar.Working here in pre comissioning especially in loop checking and function tests . Have experience in DCS Foxboro and PLC Triconex with Invensys Systems.Working under Chiyoda Technip joint Venture for RasGas project-2

BS Electrical Engineering, 10 yrs experience instrumentation oil and gas industry, hardworking, computer literate: MS Word/Excel/Projects.

Electrical High Voltage Protection Technician

Specialist of Control System in Designation of Aromatic IV Plant in Borozouieh Petrochemical Complex in Assaluyeh and in consortium with LG E&C and Toyo, Preparation of DCS/ESD Loop/Logic diagram, Instrument Location Layouts.

I have over 13 years experience related to SCR drive Disel Electric Drilling Rigs, both in Service, Manufacturing, and Preventive Maintenance.

I am currently in my 4th year (finish Sept 2003)of a Masters degree (Meng) in Mechanical & Offshore Engineering at The Robert Gordon University, Aberdeen. Since May 2002, I have worked as a Student Engineer for a large service company within the petroleum industry, Weatherford

Project Information Manager/ Intergraph PDS Administrator & Support

Have a lot of experience if field operation specifically with coiled tubing.

Vibration Analyst / Machinery Engineer. 9 Years Experience. Working on Bently Nevada ADRE and CSI RBMWare. Fluent in English.

I also have 7 years of experience in analysis packages like STAADIII & In these seven years of service, I have directly worked in multiple functions proposal Engineering & Detailed Engineering. CAESAR,CFD.I am conversant with packages PRO-E, IDEAS, CFX.

Planning and Cost control Engineer with 10 year experience in Oil, Gas and Petrochemical Industry.

I would like to apply for Network Administrator or Network Engineer post in middle east countries

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

I am a Chemical Engineer from Texas A&M University-Kingsville. I have my Masters degree in Chemical Engineering .I have earlier worked with BetzDearborn Ltd. in water treatment field for a 27000 MT refinery. At present I am looking for a job in the Chemical/Petroleum sector.

I would like to express my interest in joining your company if there a vacancy for me as an experienced mechanical engineer graduated from K.F.U.P.M in 1993.

Looking for a mechanical working environment, with open atmosphere, welcome new idea.

Objective: Process Engineer where I can contribute technically to a growing, global and environmentally conscious energy firm. Currently a student of M.S. Chemical Engineering at Oregon State University Expected graduation date-June 2003.Worked as a process engineer in a refinery for three years

Lead Inspector For Pipe mill team for Kinder Morgan project ,Anadarco petrolium project from last six months.good command on handling team. For Onesty first priority

I am a graduate civil engineer.I am proficient in: Pdms11.6, Staad pro (Certified by engineering staff college, Bangladesh), Etabs, AutoCAD, Micro Station-V8, Microsoft Visio & Ms Office.

Planning, Scheduling, Computerized Maintenance Management System - CMMS,

I believe my experience and solid record of achievement make me an ideal candidate for any engineering position within your organization. My enthusiasm for the position and my interest in working for your Company were strengthened as a result of searching.

Diploma course in autocad, working as a design engineer for past 1 year

I am a hard worker, willing to learn a new thing, initiative and creativities problems solver. I have qualities such as good personality, strong communication skills, and excellent ability in team working. I can communicate well with other people and enjoy being part of a team-work, especially if it

I am an Electrical (Electronics & Communication) Engineer determined to get thru in expediting the Projects on the basis of self learning and self motivation I have the hands on experience while working as a Sr .Application/Project Engineer in Innovative Automation and Engineering Private Limited),

I am qualified Mechanical Engineering having 6 years of Experience in the field of Mechanical Design of Static Eqpt such as Pressure Vessels, Heat Exchanger, Column, Reactors, Indirect Hype Heater, Storage Tank etc. Well versed with International codes like ASME SEC. VIII Div.1 & 2, UHX, TEMA, PD550

Solid academic formation in petroleum engineering. Native Spanish speaker, proficient in English. Computer literate in Autograph (Esp design), FoxPro (inventories), and MS Office. Available immediately, willing to travel and / or relocate.

Analyzer Engineer

Instrumentation and Control Engineer

Lifting Equipment Inspection Engineer, Senior Welding Inspector, Material Inspector, Product Inspector.

I have 1 year field experience and 2 year off-shore process design experienced.

B.E,HAVING SKILLS IN PDMS 11.5,UNDERSTANDING P&ID'S ,preparation of piping layouts

Welding , QC , WPS , PQR , WQP, Inspection , NDT

Process Design Engineer (B.E. Chemical)

40 years, Production, Workover, Drilling Supervision, Land and Offshore

Degreed chemical engineering with an Engineer-In-Training certification and two years of process engineering experience.

I am a self motivated and well inspire graduate of Geology. With Junior to intermediate level job experience in Petroleum geology. With interest in reservoir engineering, mud logging, well logging, reservoir geology, wellsite geology, log interpretation, data entry and field engineering

I have very good experience in field management in installation, commissioning of rotating equipments and auxiliary systems such as pumps, diesel generators, compressor etc. and pipe works including piping systems. In selecting the types and standards for static equipments.

Instrument/Process Control engineer with more than 17 years of experience in Plant/Project engineering, construction and commissioning of Gas/Condensate and petro chemical industries.

17 years experienced engineer

More than 22 years (16 years in India and 6 years in Saudi Arabia) in Electrical Power/Substation/ Managerial/ Electro-Mechanical /Petrochemical/ Geographical Information System (GIS), fields.

Have a strong :Managerial and technical skill, leadership skill, agent of change, interpersonal and intrapersonal skill, Communication skill, Good motivator, Familiar with API and ASME Codes Standards, Familiar with P&ID, Familiar with ITP, Familiar with Rotary and Static Equipments, Installing Rota

First Prev 51 52 53 54 55 56 57 58 [ 59 ] 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out