Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #72707 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATION
------------
From 2007-05 to 2007-05.
At Ecological monitoring center: Waste management course.

From 2006-06 to 2006-06.
At EMERSON, Moscow: Delta-V control system.

From 2005-10 to 2005-10.
At Schlumburger: ESP (Electrical Submersible Pump).

Ongoing since 2002-10
At Kharyaga training center: H2S Training, Risk Assessment Training, SCBA Training, First Aid Training, Permit To Work Training, Fire Fighting Training, Oil spill Training, Code of Business Conduct Training.

From 2002-09 to 2002-09.
At "Phakel" Training Center, Usinsk: Safe Operations in the Oil Fields with H2S content.

From 2002-06 to 2002-07.
At Sector 4-32, Nizhny Odes, Komi: Oil-and-Gas Production Operator, 5th grade.

From 1997-08 to 2002-06.
At Ivano-Frankovsk National Oil and Gas Technical University, Ukraine, Faculty: Oil-and-Gas Industry Specialty: Oil, Gas and Gas Condensate Fields Development and Operations Specialization: Oil Production.
------------

WORK EXPERIENCE
------------
Ongoing since 2006-12.
At Production Services Network Eurasia ltd as Production Supervisor. Responsible for the safe and efficient operation of the production facilities of Total Exploration & Production Russia. Manage the implementation of approved operating practices and improvement programs. Ensure proper and safe arrangement of the workplace. Minimize risks to people, environment and the facility. Control all production activities. Analyse of the production process and develop production operations improvement proposals.

From 2004-12 to 2006-11.
At KBR as Central Control Room Operator. Responsible for management of all well related activities, averting all activities which violate HSE. Issuing daily reports, oil quality passports, oil acceptance certificates, execute work permit control. Oil treatment, water injection related activities & supervision by means of DELTA V control system, TRICONEX safety system and ÌÅÒÅÎR & OMNI oil accounting system. Electrical Submersible Pumps start-up and Variable Speed Drives operations and control. Chemicals calculation.

From 2002-08 to 2004-12.
At KBR as Plant Operator. Responsible for Oil treatment equipment operations: centrifugal, piston, plunger pumps, separators, dehydrators, H2S stripper columns, low pressure air compressors, nitrogen units, fire heaters, diesel generators. Wells' head operations. Oil, water, gas sampling. Water content analyses.

From 2001-07 to 2001-09.
At Severgeoldobucha as Driller assistance. Responsible for drilling equipment operations. Deep-hole drilling, completion and coring. Well casing design. Good knowledge of safe works: at height, risk of contact with electricity and hazardous substance, operation with lifting equipment, etc.
------------

PERSONAL LETTER
------------
6 years of experience in the oil & gas industry as Plant Operator, Control Coom Operator and Production Supervisor at the Kharyaga Oil Field (North of Russia). Issuing of daily reports, oil quality passports, oil acceptance certificates, work permit control. Oil treatment, water injection and all relative activities supervision. During the work for a foreign company I obtained rather considerable amount of knowledge in crude production process and also the practical skills in process operational equipment.
I regard Safety as a priority in company's main tasks so I am always eager to study & follow Safety Rules & Requirements, safety policy & procedures of company. To follow these rules mean to defend ourselves against possible accidents & to prevent any emergency situation.
------------

View contact information...
«« previous resume next resume »»
Search Results (Resumes 3251 to 3300 of 6411)Go to Search Parameters...
Brief Description
Piping Engineer, Mechanical
Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation
Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.
Seeking a challenging career with in a reputed Company
This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.
Summary of Qualifications. Eighteen years of documented success in the design, oilfield and construction industry. ·Experience on project and design working extensively with the Designers and Engineers.
Engg.graduate with exp.in projects at various Breweries in India
Senior Qa/QC For Oil/Gas Projects
Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning
LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization
Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.
My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.
A challenging and rewarding position as a Instrumentation Technician in the semiconductor or semiconductor equipment industry.
Piping Engineer - Stress analysis specialist engineer high pressure and temperature piping. Worked with Babcock, Mitsui and presently working with UHDE.
Mechanical Engineer, with over seven years of experience in construction for Petroleum/oil/gas/power industry. I am certified associated welding inspector CAWI. QA/QC experience
Successful Project/Design Engineer experienced in cutting edge engineering technology. Outstanding record of achievement in managing projects from concept stage, to engineering design, to 1st prototype, to final product.
executing and completing the installation, testing & commissioning of the Medium Voltage (13.8 kV) Switchgears including the protection panels.
An experienced geophysicist with a Master's degree in Exploration geophysics and a second-class upper degree (with honours) in geology with interests in field geophysical surveys, seismic processing and geophysical data interpretation.
With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication.
I'm an apprentice trained Instrument Technician, trained by a major oil company. I have since gained a wide range of experience at technician and supervisor level in both commissioning and maintenance.
As you can see from my resume I am very familiar with engineering work through my education at the University of Pittsburgh at Johnstown and with my employment in different engineering fields after my graduation.
Seeking to advance my Mechanical Engineering career in the Oil and Gas Industry of the Houston, Texas area. I am a quick learner and detailed oriented.
Field Service Technician-National Oilwell Varco. Global installations, upgrades, maintenance, or troubleshooting of drilling equipment. I also served as a Pneudraulics Systems Specialist for the United States Air Force. I repaired and maintained numerous aircraft in adverse conditions.
Ms Office; MathCAD; AutoCAD; Internet
Bachelor¡¦s Degree in Mechanical Engineering & Manufacturing
Mechanical engineer.
Marketing Research
I am a production engineer with 6 years experience. My skills are: artificial lift design, optimisation and troubleshooting (gas lift, ESP, SRP, PCP); well production optimisation using nodal analysis (software Wellflo, PROSPER); network optimisation using software ReO; stimulation; well testing
SKILLS: WELDING, NDT
Undergoing graduate Engineering Training at Kochi BPCL
BE mechanical/fresher
I am Recent gaduted in petroleum engineering.I can easily can comuniocate.I have also experience in managment.I am also well known about MS office.
I am a first class degrees holder in BE (Mechanical) and M.Tech (Energy Systems) and I have 2.3 years experience in the field of piping design and pipe stress analysis engineering and looking for a job in a reputed concern
I want to work in your company to improve professional skills, to obtain an engineering position in a petroleum industry which will enable me to utilize my analytical and interpersonal skills. Engineer with broad experience in seismic exploration, especially in the sphere processing 2D/3D data.
Analysis and Design of various Structures Analysis and design of vessel
Early Career Petroleum Eng, with trilingual (Incl Arabic) and Dual Master's degree (Petroleum and Computer Science).
10 years experience in the maintenance of rotating equipment such as pumps, compressors, Gas turbines…etc out of which no less than 5 years in condition monitoring field.
Production Tech
I am working as a electrical maintenance and electrical cad design supervisor with an year experience
B. Sc. of pretroleum engineering with 5-yrs degree, have 1-yr experience in driliing, workover and well completion enginnering
A competent, dynamic, highly motivated and professional 35 years engineer, with 10 years excellent experience working oil industry and naval industry , possessing excellent communications and inter personal skills now seeking suitable position where I can apply these skills and further developed.
A motivated, Dynamic and result oriented Mechanical engineer having BINDT certificate and experience for more than 9 years with different international companies begins from Inspector to Asst superintendent.
Senior Instrumentation technical. Diploma in electronics.
I have approximately 12 years experience in oil & gas industry. I am presently considering a position change with a company offering greater responsibility and more career advancement opportunity.
Oil & Gas industry design of offshore living quarters, buildings, firewalls & helidecks.
More than three years of industry experience including asset evaluation, reservoir simulation, annual reserve reporting, long term depletion strategy, enhanced recovery evaluations, expert witness testimony, economic evaluation and forecasting.
SPECIALIZATION: Oil Drilling & Production - Equipment
6 years of experience in the oil & gas industry as Plant Operator, Control Coom Operator and Production Supervisor at the Kharyaga Oil Field (North of Russia).
M.Tech (HSE), B.Tech (Safety and Fire Engineering) specialized in oil and gas sector
Petroleum Engineer
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   [ 66 ]   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com