Resume - 20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

Misco Jobs

Resume #72721

CONTACT INFORMATION:
View contact information...

Objective:
A challenging and rewarding Drilling Engineering position specializing HPHT, Deep Water and/or Extended Reach Drilling.
------------------------------------------------------------------------------------------
Qualifications:
20+ years World Wide diversified drilling and Well Engineering experience.
Can perform detailed well design, planning and cost estimation from concept to execution.
Proficient with Well Engineering software including Compass, StressCheck, WellPlan, Casing Wear, etc
Possess a good understanding of the subsurface disciplines including geology, reservoir engineering, & petrophysics.
Experience in working in multi-disciplinary and multi-ethnic team environments
Strong business sense, combined with interpersonal, organizational, communication and facilitation skills.
Experienced with tendering processes (preparation & evaluation of) and the specifying and ordering of drilling equipment & services.
Highly experienced in ERD and horizontal drilling.
Experienced in Subsea and HPHT well design.
------------------------------------------------------------------------------------------
Work Experience:
ENI Australia, Sr. Drilling Engineer, 2007 to Present
All aspects of planning, programming and executing Subsea and Jack-up wells in Northern Australia. Currently planning the Blacktip Gas Development wells.

Contract Sr. Drilling Engineer: Shell Brunei Petroleum, BP and K&M Technology Group. 2000-2007
Brunei, Australia, New Zealand, China, GoM USA, Alaska, Indonesia, West Africa, UK Sector North Sea
Front End Project well planning including
Directional well design
Drillability and feasibility studies
Casing and Cement Design
Probabilistic and deterministic cost estimating
Drilling Operations Engineer
Well site engineering surveillance on ERD and horizontal wells
Contracts, Procurement and Tender Evaluation

Directional Drilling Engineer, Schlumberger Anadrill, 1997 - 1999
Duties included all aspects of onsite directional drilling supervision such as bit/BHA selection, well planning, drilling parameters and drill crew instructions. Worked in Australia and Saudi Arabia.

MWD General Field Engineer, Sperry-Sun Drilling Services, 1989-1997
Duties included field operation and interpretation of Resistivity, Gamma Ray, Neutron Porosity, and Formation Density Logging-While-Drilling tools. Researched, built, tested and documented Sperry-Sun's Downhole Drilling Dynamics sensor. Also operated all directional MWD tools, single-shot, multi-shot and Gyroscopic survey tools as well as downhole motors. Worked in USA, U.K., Norway, Australia, Brunei and Canada.

Drilling Supervisor, Industrial Pacific LTD, 1988-1989
Designed, tested and built drilling tools and equipment used in mineral exploration. Worked in Montana, USA.

Drilling Foreman, Diamond Shamrock Petroleum, 1985
On site supervision of oil drilling and completion operations in Wyoming's Powder River basin.

Rig Hand, 1977-1984
Various drilling, roughnecking and workover rig jobs in the Rocky Mountain Region of the U.S.
------------------------------------------------------------------------------------------
Drilling Courses
* IWCF Subsea / Supervisor Well Control
* Casing Design
* Cement Design
* Directional Drilling and Well Planning
* Formation Evaluation, I, II and III
* Decision Making and Risk Analysis
* Horizontal and Extended Reach Drilling
* Pore Pressure Prediction
* Advanced Concepts of Drilling Fluids

Safety / Health / Envoronment Courses
* Emergency Response Training
* Oil Spill Emergency Response
* Contractor Safety Managements Systems
* STOP and Advanced Safety Audit
* Basic First Aid, (USA, UK, Singapore and Indonesia)
* Cardio Resuscitation, (USA, UK, Singapore and Indonesia)
* HUET/Solas, (Aberdeen, Perth and Singapore)
* Firefighting, (Aberdeen, Perth, Singapore and Jakarta)
* Defensive Driving
* Radiation Safety Training
------------------------------------------------------------------------------------------
Dual Citizen, Australia and USA

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7051)

Go to Search Parameters...

Brief Description

Experienced on preparing Engineering Design such as FEED preparation package and Detail Design preparation package including procurement and planning support activities and projects involves are TOTAL FPSO, Off- shore Facilities, On- shore gas plant, semi- conductor plant, pharmaceuticals plant.

Experienced engineer-seeking position in management

Mech.engineer/18 yrs exp /petrochemical/refinery/power plants (Maintenance/Projects(Piping/pipe line/equipments)/shutdown maintenance)

Over 18 years of drilling and completion experience.

I am an highly skilled and ethical professional seeking employment as a Lease Analyst or Division Order Analyst in any Oil and Gas industy. I have been in the Land dept. in oil and gas since 2005, I have a bachelor's degree in business and currently taking a course in Land Analyst Institute.

I have more than 18 years experience in engineering .I am confident that with my experience in project Design, Planning, Scheduling, I can make a significant contribution to your projects.

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out