Resume - I am in a position to take full and independent charge of major plant overhauls ...

Misco Jobs

Resume #72800

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Seeking a challenging, creative position in a dynamic, growth-oriented company that will utilize my experiences and my potentials as an effective contributor to the work I will be handling.

EXPERIENCE
2001-Present Saudi Electricity Company Qurayyah, KSA
Generation Engineer
ƒÞ Assures the completion of day-to-day maintenance works in a 2600 MW capacity steam power plant, including but not limited to high pressure boilers, turbines, condenser, feed water heaters, pumps, fans, fuel handling, storage equipment, fire protection system, desalination plant, deminralizers, etc. ..
ƒÞ Troubleshoots, develops and advises on plant process and mechanical problems related to plant and equipment and supervising their development, manufacturing, specification, construction, installation, operation, maintenance and repair.
ƒÞ Supervises and performs inspection on several major plant overhauls.
ƒÞ Conduct engineering analysis and develop cost effective solutions of complex problems related to the operation of pumps and compressors.
ƒÞ Good understanding of vibration analysis to allow the interpretation of vibration data on plant rotating equipment.
ƒÞ Lead investigation and perform analysis of major failures of critical plant rotating equipment.
ƒÞ Oversee performance/capacity tests of plant rotating equipment.
ƒÞ Write high quality letters, reports, and design packages to enable implementation of engineering recommendations
ƒÞ Carries out various technical engineering tasks such as participation in modification projects, attending factory acceptance tests, reviewing and approving of design drawings and specifications, developing ideas for optimizing of plant operation.
ƒÞ Initiates visibility studies and evaluation, includes estimating labor, materials and other costs of manufacture, installation, operation, maintenance and repair requirement and responsibility for plant improvement, rationalization of raw materials, cost reduction and safety.

2000-2001 Halliburton Inc. Al-Kubar, KSA
Associate Technical Professional
ƒÞ Working as engineer associate in planning and executing of oil well fracturing job, pinpoint stimulation, acidizing/near-wellbore cleanout.
ƒÞ Implementing training courses for new recruits.

EDUCATION
1994-1999 King Fahad University Al-Dhahran, KSA
ƒÞ B.A., Applied Mechanical Engineering,

TRAINING & CERTIFICATIONS
Attended numerous engineering and management courses, seminars and workshops. Such as:
ƒÞ Centrifugal pumps for engineers
ƒÞ Troubleshooting turbine steam path damages
ƒÞ Boilers operation, maintenance and water treatment technology
ƒÞ Actuator maintenance Engineering
ƒÞ Machinery failure analysis & prevention
ƒÞ Vibration analysis for power plants
ƒÞ Practical piping fundamentals and troubleshooting
ƒÞ Safety Valves in Power Plant
ƒÞ Tahseen Primary (Team Leaders)
ƒÞ Communication skill program
ƒÞ Creative thinking

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4001 to 4050 of 6411)

Go to Search Parameters...

Brief Description

Production engineer, with strong knowledge in Rod Pumping, ESP, Gas Lift and softs related. Also production and inyection follow-up, project evaluation. Additionally experience in managment and operation.

Creating the Spool drawings for fabrication purpose using the Spoolgen Software.Input Files Taken from PDS, the Output is generated in Microstation,Checking the Generated Drawings & Documentation preparation.

Civil Engineer. Developing the 40 + retail outlet fro IOCL.IBP, Essar Oil in India.

Application Manager - Control Valves and Engineered Products

Project Engineering & Management

Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.

3 Years Diploma in Mechanical Engineering with 11 years experience in valve Engineering i.e. Sizing, Selection, Maintenance, Repair and Implementation of all types of industrial valves.

I am doing job in wireline logging in H L S Asia Ltd in India on the post of an operator. I am doing independent cased hole and open hole jobs on onshore and offshore and driving LMV and HMV.

NACE CIP LEVEL II COATING INSPECTOR, CERTIFIED PIPELINE WELDING INSPECTOR, HAZMAT

A wide on-offshore range of experience in heavy equipment maintenance. Managing and supervising day-to-day preventive maintenance (P.M.) using a computerised maintenance management system. (C.M.M.S.) Modify equipment and machinery using management of change documentation (M.O.C.) to improve rel

Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)

Petroleum Engineer having work experice for five years with a gians multinationals lioke Halliburton & Schlumberger in Reservoir & Production Engineering Areas

Experienced Senior Electricial Technician in oil refinery. Familiar with maintenance motors, transformers, generators and protection for the sames, frequency converters, power regulators, installing and programming PLCs etc.

Chemical Engineering / Chemistry graduate from the University of Minnesota

Mechanical engineer-Masters-2 years experience as research assistant-proficient in development and usage of Finite element codes and packages-actively looking for a job.

The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.

B.S. CHEMICAL ENGINEERING UNIVERSIDAD METROPOLITANA, Caracas – Venezuela • Minor: “Oil/Gas & Petrochemicals, Production Engineering” • Graduation Date: February 2002 • GPA: 3.55 / 5.00 N°10 in 21 graduates.

• Excellent interpersonal skills • Excellent leadership abilities • Thorough individual with good analytical skills • MS Power Point presentation skills • 4 years experience spanning academia and industry

Degrees in BSc(GEOLOGY) and BCom(FINANCE). Experience in E&P companies undertaking economic modelling, reservoir performance and completions, and development geology.

Bachelor of engineering degree in metallurgical and materials engineering (b.eng). grade: second class upper division.

Engineering background consisting of manufacturing, project organization, and design disciplines. Experience with factory and marine environments, office and fieldwork, and ability to interface with a variety of people.

A Chemical / Process Engineer

Over 5 years of experience in petroleum industry, including, but not limited to various aspects of management and monitoring of the oil fields, wide usage of environmental engineering, performing general overall supervision, conducting communication with vendors and consultants.

An engineering position with potential for professional growth and advancement.

Mechanical Field Engineer; 5 years experience; Industries: Construction, Oilfield Services & Transportation; Areas of Interest: R&D, Field Engineer, Project Management

Chemical/process engineer

Seeking a long-term position in the field of Information Technology or Consulting where I can learn and grow in a fast paced and rewarding environment.

Working Experience with CADCENTERS PDMS and INTERGRAPHS PDS-3D in various aspects of Basic and Detail Engineering including Project Planning and Implementation right from Development of Plot Plan, Equipment Layout, Piping Layout, to Isometrics, Design Review and Material Take off.

I am now looking to apply my many skills in a pipe drafting position. And along with my drafting and field experience I am confident that my newly obtained skills in assisting fabrication coordination of this project will be of great use in the design phase of all future projects.

Site Safety

I'm a reservoir engineer working for rashpetco(JV.of BG&EGPC)for the following topics:runing eclipse 100 simulation,kappa saphir wt analysis,prosper nodal analsis,mbal(MB software),gap(netwark),floviz,reservoir coupling,office,pvti,schudule,pss,petrel ,controlling the multi segmented wells

I am Engineer, MBA, Speak 4 languages, Excellent Computer Knowledge, I have done several courses in the Petroleum Industry. I've worked in a Shell Petroleum Refinery in the Engineering Area, Inspection, Maintenance, and Projects. Also in Economy of the Refinery working on the MIS and KPIs.

Senior Engineer: PLC SCADA Systems Experience in the Oil and Gas Industry (ESD and F&G Safety Systems)

I have 6 years experience in multidiscipline oil-gas companies with every stage of drilling , completion and workover operations as planning , supervision , technical services , logistic , maintenance.

I am a Petroleum Engineer that possesses technical expertise in petroleum economics evaluation, and reservoir engineering analysis with some reserves booking experience. In addition, I am very eloquent with Microsoft's office software and all windows environments.

Cuban Petroleum Engineer looking for work.

Solid management experience in professional Procurement (purchasing, quality control and logistics)

Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm

I am a chemical engineer with 15 year experienced in oil, gas processing and petrochemical plants (Polyethylene-LLDPE/HDPE/LDPE). Extensive experience in gas separation, purification, refrigeration, all type of compressors. Day to day activities of production plant and catalyst manufacturing.

7 years experience in the oil filed, (Mudlogger, Data engineer and a pressure engineer)

The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder being associated with the Onshore – Offshore Oil & Gas Plant industry. Experience has been gained in all aspects of Engineering Piping Design & drafting activities with the emphasize on piping plan, isometric, pipe spoo

Ten Years Of Effective Managerial/Sales Experience At The Professional Level

I am in a position to take full and independent charge of major plant overhauls related to boiler and its auxiliaries, intake equipment, fuel gas station and fuel oil handling station

Electrical Technician/Cell Phone Technician

Project Management

Electrical Engineer - Design and Estimation

Oil and Gas Drilling Professional

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

• Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles

Eight - year experience in Civil Engineering Projects.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 [ 81 ] 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out