Resume - Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies...

Misco Jobs

Resume #72839

CONTACT INFORMATION:
View contact information...

SUMMARY OF STRENGHTS
------------
New Business Development (Development Concept Selection, Well & Completion Design)
Field Surveilance
Well and Reservoir Management and Optimization
Production Engineering
------------

OBJECTIVE:
------------
Job opportunity to serve in a leadership role, managing both human and material resource to achieve company's development and growth aspirations.

WORK EXPERIENCE:
------------
2007 – Shell International Exploration & Production (SIEP) Inc., Houston, USA
Senior Production Engineer
* Implementation Lead, Subsea Multiphase Flow Meters in Bonga North
* Focal Point -Smart Well Design, Modeling and Implementation for the Bonga North Project
* Concept Selection and Completion design for Bonga North Wells
* Inflow-Outlow modeling and Fractured water injection modeling
* Well and Reservoir Surveillance Strategy development for the Bonga North Field
* Conceptual Field Development Plan for Bonga North
* Stakeholder Engagement for Concept Selection and Define Phases of the Bonga North Project.
* New Technology Champion for the project

2004 –07 Shell Nigeria Exploration and Production Company (SNEPCo), Ltd., Lagos, Nigeria
WRS and Optimization Engineer
* Lead Production Technologist for Bonga Start-up and Ramp up. Bonga FPSO produces over 220,000 bopd and supplies gas in excess of 160 MMscf/d to the OGGS line to Bonny Terminal.
* Co-lead a sub-team of engineers to design the wells and reservoir start-up procedures for the Bonga Field in deepwater offshore Nigeria (250,000 bopd FPSO production).
* Designed the initial unloading and pressure transient tests of the first batch of Bonga wells. Analyzed PTA data to derive well performance and reservoir properties.
* Ramp-up design for final unloading of the wells to the FPSO
* Developed a Well Operating Handbook for Bonga Subsea wells (Producers and Injectors) detailing the operating envelopes for each well.
* Built Integrated Production Systems models and used same to optimized production in the EA field offshore Nigeria (140,000 bopd FPSO production), leading to over 5000 bopd production gains.
* Championed Data acquisition campaign trail via slickline operations on the EA DPs originally designed for no-intervention.

2002 – 04 Shell International Exploration and Production Inc., New Orleans Lousiana USA.
Well Analyst / Production Engineer
Responsible for Production Surveillance and Optimization on Major fields of the Mars Basin (Mars, Europa, King, Ursa, Crosby, Princess and Mensa) Total gross production from these fields averages 330,000 bopd and 610 mmcfd from about 38 wells.
Technical responsibilities include:
* Real-time systematic review of key parameters for each well to identify changes in operating characteristics -surveillance.
* Well performance analyses, production optimization and monthly/quarterly integrated production plan forecast (oil & gas sales and availability) Specific work products include:
* Developed a SEPCo wide real time production monitoring tool (Sepco Radar Screen) to monitor real time production of all fields based on the PI system
* Production curtailment estimation tool for URSA field
* Data Quality Assurance tool development

2000 –02 Shell Production & Development Company (SPDC), Warri, Nigeria
Team Leader Production Planning and Programming
* Championed Target setting and deferment analysis process, Barrel Chasing initiatives -and reservoir management and production optimization
* Developed e- reporting tool (Division wide tool for production data reporting and storage)
* Developed Electronic Graphbook
* Guest Lecturer for Shell Foundational course on completions

1996 – 00 Shell Production & Development Company (SPDC), Warri, Nigeria
Production Technologist/Engineer
* Responsible for field development, field surveillance and production enhancement activities at the onshore fields –Western Division of SPDC. Was responsible for 319 drainage points, a mixture of natural flowing and gaslifted wells which all together contributed to 58% of the oil production (65,000 bbls of oil and 75MMscf of gas) from the Land area.
* Other Technical duties include co-ordination and implementation of realize-the-limit initiative, focal point for water-to-value initiatives, workover and short-term-oil generation proposal writing and activity execution.
* Served as Technical Integration facilitator for the Ovhor Project Team
* Guest Lecturer – Production Technology EP00 events (learning events for young engineering recruits)

RECENT PUBLICATIONS / CONFERENCE PAPERS –
* Ageh, E et.al "Bonga Main Completion Performance" Presented PT/CE Conference the Woodlands Houston Texas, USA October, 2007
* Inikori Solomon, Ageh, E. et.al "Bonga Field Development" SPE ATCE Conference Anaheim California, USA. November 2007
* Ageh, E, et al "Operating Envelope Determination and Sand Control Performance at the Bonga Field, Deepwater Nigeria Offshore West Africa" Offshore West Africa Conference Abuja Nigeria January 2008

PUBLICATIONS &
PRESENTATIONS:
[1] E.A. Ageh, "Produce the Limit" Barrel Chasing Initiave in the Land Area Fields Western Division SPDC, EPNL Publication, July 2000.

[2] E.A. Ageh, U. Akpan, J.C. Okoro "Flared gas management: Shell Nigeria's approach"
Proceedings of the National Conference of the Nigerian Society of Chemical Engineers, Port-Harcourt, Nigeria, 1999

[3]Ageh, E. A. "Terminal Operations" Internal Paper, Shell Nigeria –Western Division, June 1997.

[4] Ageh, E. A. "Basis for Design, Interconnecting Pipe Network between Ughelli West and Ughelli East Oil Fields" Internal Paper, Shell Nigeria –Western Division, January 1997.

[5] Ageh, E. A. "Overview of Wireline Services", Internal Paper, Shell Nigeria –Western Division, May 1997.

[6] E.A. Ageh "Evaluation of the performance of Ion-exchange train at the Demineralisation Unit of WRPC", An Industrial Project submitted to the Department of Chemical Engineering, Ahmadu Bello University, Zaria November 1991.

[7] E.A. Ageh "Simulation of DO-BOD Responses in River Kaduna", A Research project submitted to the Department of Chemical Engineering, Ahmadu Bello University, Zaria August 1992.

[8] E.A Ageh "Design of a Plant to manufacture 60,000 per annum of Phenol", Design project submitted to the Department of Chemical Engineering, Ahmadu Bello University, Zaria November 1992.

EDUCATION:

Master of Science (M.Sc.) in Chemical Engineering
Specialization in Process Engineering.
Ahmadu Bello University, Zaria, Nigeria, 1996.

Bachelor of Engineering (B.Eng.) in Chemical Engineering,
Ahmadu Bello University, Zaria, Nigeria, 1992.

Ongoing Studies:
University of New Orleans, New Orleans, Louisiana USA
Master of Business Administration (M.B.A) -Technology Management Concentration

Ahmadu Bello University, Zaria Nigeria
Doctor of Philosophy (Ph. D) in Chemical Engineering

ACADEMIC DISTINCTIONS:

Best Student in Petroleum Technology, Chemical Engr Dept ABU
Best Student in Design Project, Chemical Engr Dept ABU
National Prize -Design Contest, Nigerian Society of Chemical Engineers

PROFESSIONAL
MEMBERSHIPS: * Society of Petroleum Engineers
* Nigerian Society of Engineers
* Nigerian Society of Chemical Engineering

SKILLS:
Languages: Fluent in English,

Business Training: Strategic Cost Leadership, Organizational Behaviors, Corporate finance and financial policies, Organizational decision making and analysis, Project and Operations Management

Computational: Extensive experience with Microsoft Word, Excel, PowerPoint, and Project; Precision Tree (Decision Analysis). In depth knowledge of numerous petroleum engineering modeling and simulation packages (PETEX Suite, PWRI-Frac, IPM, PANSYS, WePs, Horvip Winglue for Gaslift designs, SAPHIR etc…) Surveillance applications such as PI ProcessBook and Datalink.

Others: Highly motivated and goal-oriented self-starter, Excellent working experience in a multi-disciplinary setting

ADDITIONAL
INFORMATION:
Relocation: Will relocate and/or travel worldwide.
Hobbies: Music, traveling, soccer.
Personal: Male, Married with 4 children

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 7054)

Go to Search Parameters...

Brief Description

Subject: Application for the Post of Geologist

Experience in commissioning 5MW wartsila diesel engines, underwater mountable Thrusters, marine systems, meeting with owner and class surveyor, technical management of ships, operation and maintenance of marine systems

An Instrument & Electrical Inspector/Supervisor with 15 years of extensive experience in the field of Inspection, Engineering, Construction, Hook-up, Commissioning and Certification of various kinds of Plants such as Petrochemical Plant, Desalination Power Plant, Sewage Water Treatment Plant, Oil &

I am a graduate Mechanical Engineer with over 20 years Oil & Gas Refining industry experience, out of which about 10 years at a AMOCO fuels and lube refinery at India. I am currently working as the Mechanical Design Engineer for a prestigious mega refinery project (world¡¦s largest grassroots refine

senior geologist

A qualified engineer with over 16 years of experience in production

"Rotating Equipment Engineering Specialist" with 17 years experience in refinery, gas plants, LNG plants and petrochemical plants for rotating equipment maintenance support, diagnostics, troubleshooting, reliability improvement and repair.

EM/MWD/LWD Gamma

I was assigned as Production Technologist for PETRONAS. My assignment mainly in Field Development Project whereby my job scopes are focusing on well &tubing design i.e. well completion design, artificial lift screening/selection & design, Sand prediction & sand control selection,

I am Expert on Reservoir Engineer, my capabiliity can cover whole petroleum engineering

Over ten years of experience in the design, troubleshooting, maintenance and optimisation of new and existing facilities including sweet and sour natural gas plants, oil batteries, water injection, water treatment and chemical plants.

This letter is to express my interest for a Senior position in oil & gas Exploration. Based on my skills in Geology and oil and gas Exploration and New Ventures, Experienced Geoscientist, Explorationist and new ventures activities; PhD graduated In Geology (1991), bachelor (structural geology).

Electrician - Canadian journeymen , Instrument Technician - Canadian certification,10 years Supervisory, Startup and commissioning expert. Offshore FPU FSO. PLC Expert/ DCS, Experenced Trainer. High Voltage, protection relay testing, Valve repair, Work exp. in Canada, Libya. Indonesia.

I have over 32 years in the Coatings industry, 22 years as a Coatings Inspector (British Gas/CSWIP BG57012), with 14 years as a Coatings Advisor to ExxonMobil Nigeria. My duties For Exxonmobile included Inspection of all onshore and offshore facilities also new construction projects. Other duties in

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Able to make piping design from conceptual to detail design and field engineering work( see career summary on my resume)

CATIA V5 (1600 Hours), Kaizen/Kanban - Continuous Production Improvement, Lean Manufacturing/Six Sigma, Microsoft Office Systems

QA/QC Engineer-International projects-Oil&gas industry

I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).

More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin

Analyst/Technical Assistance for reservoir/production operations

Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa

Electrical Engineer

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada

Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS

Under Ground Piping Specialist

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out