Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #72852 next resume »»
CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:

May' 2008 – Present
PRODUCTION SERVICES NETWORK – Melbourne
ESSO TURRUM PHASE II – MARLIN A AND WEST TUNA OFFSHORE PROJECT
Sr. Piping / Mechanical Designer/Checker - 3D Model PDMS Plant.
Project Assignment: ESSO Offshore Brownfield Modification Project – Bass strait (East Melbourne).
Exon mobil oil Offshore Partner.
# Produce plot plan, equipment layout and piping plans. Identify technical conflicts in layout design, coordinate with other engineering disciplines on solutions of technical irregularities.
# Prepare layouts including 2D and 3D models with adequate dimensions necessary to assist the Engineering disciplines and Fabrication/Construction personnel. Identify layout feasibility, resolve design irregularities, prepare isometric drawings for stress analysis, provide stress and piping loads for civil engineering.
# Review the Technical Document Register (TDR), evaluate scope of work, number of required drawings and establish design and drafting requirements.
# Check and Revised Pipe Support Detail Platform Marlin A dwg.
# Check and Revised Isometric dwg.
# Check and Revised MTO list.
# Check and Revised P&ID dwg.
# Check and Revised TIE-IN List.
# Check and Revised Line list Index dwg.
# Check and Modified Piping Demolished dwg.
# Prepared and Modified Piping Model on Main, Cellar and subcellar Deck area.
# Prepared and Modified Equipment Model on Cellar Deck area.
# Prepared and Modified Existing Piping Model clashed as per Photogrammetry.

August' 2007 – March' 2008
Foster Wheeler Melaka - Malaysia
PSR2 Revamp Project - PETRONAS
Sr. Piping / Mechanical Designer/Checker PDMS/ Microstation V8
Project Assignment: PETRONAS - PSR2 Revamp Project.

# Check and Revised Piping GA Plant Unit 29 Distillate Hydro treater.
# Check and Revised Piping Isometric Unit-29.
# Site visit for Modification and demolish Piping and equipment unit-29.
# Check and Revised Piping GA Plant Unit 30 Hydro cracker.
# Site visit for Modification and demolish Piping and equipment unit-30.
# Check and Revised Pipe Rack Unit 30.
# Check and Revised Plot Plan Unit-29.
# Check and Revised Plot Plan Unit-30.
# Prepared and design Pipe Support Detail.
# Prepare MTO Piping.
# Prepare and Revise Demolishing dwg.

March' 2007 – August' 2007
Fabricom Stavanger - Norway
Ekofisk Area Growth 2/4M Wellhead & Process Platform
Sr. Piping / Mechanical Designer/Checker - 3D Model Plant PDMS/Microstation.
Project Assignment: ConocoPhillips Offshore - Greater Ekofisk Modification 2 Project – Norway.
Aker Kvaerner Offshore Partner.
# Check and Revised Pipe Support Detail Platform EKO-M and EKO-K Dwg.
# Check and Revised Isometric for Platform EKO-M and EKO-K Dwg.
# Check and Revised MTO for Platform EKO-M and EKO-K Dwg.
# Prepared and Designed Modification Piping Model Platform EKO-K and EKO-M.
# Prepared and Designed Modification Pipe Support Model Platform for Area EKO-K and EKO-M.
# Update 3D model with comments from offshore and comments on master file. Make sure all connections are ok and that there are no datacon errors in line.
# Extract new isometrics with all sheets from line included. Update isometrics in microstation.
# Make sure all pipe and supports are created according to requirements from stress calculations.
# Update support drawing to as-built status with information from red-line mark up and master file.

March' 2005 – March' 2007
WorleyParsons Services Pty Ltd
Hydrocarbon Pipeline Terminal Project
Sr. Piping / Mechanical Designer - 3D Model Plant PDMS/Autoplant.
Angel Offshore (FEED) – Project.
Alinta Pipeline Gas Expansion Project – Western Australia.
DBNG PIPE LINE STAGE 4B AND STAGE 5A EXPANSION PROJECT – Austrralia.
* Prepared & design for 3D Model plant - New Compressor Station area Dwg.
* Prepare drawings related to piping and general mechanical equipment including: layout drawings, general arrangement drawings, process and instrument diagrams, piping isometric drawings, and other drawings and sketches.
* Prepare drawing lists, equipment lists, line lists, valve lists, instrument lists, cable schedules, motor lists, load lists, and other lists and schedules which must be relevant quality system procedure.
* Design & Revised for GA Site Plan Dwg.
* Prepared Tie-in New Compressor area Unit to existing Pipe Line.
* Ensure drawings are checked, approved and filed in accordance with the relevant quality system procedure.
* Prepare drafting-related calculations as required for area of assignment, and have them checked, approved and filed in line with the relevant quality system procedure.
* Prepared Pipe Rack Site Plant Dwg.
* Design & Revised for Piping Tie-In Site Plan Dwg.
* Prepared & design for 3D Model Compressor Equipment Dwg
* Checked & Revised Piping 3D Model Plant - Clash Check (Rebis Explorer)
* Checked & Revised P&I D Dwg.
* Make MTO Piping Report.
* Checked & Revised for Pipe Support Standard dwg.
* Design 3D Model – Fuel Gas Skid Dw.
* Checked & Revised Piping Isometric Dwg.
* AS BUILT DWG.

June' 2004 – Oct' 2004
Technip - Abudhabi
Piping and Mechanical Checker / Designer – PDMS/PDS
Rumaitha, Al Dabb'iya & CPP – NEB ADCO Project

* Checked Piping 3d Model Plant Dwg (SPR Model Check).
* Checked & Revised Gas/Oil Production Manifold Dia 8",10" & 12" to CPP Pipe line
* SPR Clash Check for 3D Model Manifold & Mechanical Dwg.
* Checked & Revised Piping Isometric Dwg.
* Checked & Revised P&I D Punch List Dwg.
* Checked Piping Clash with SPR Model Plant.
* Checked & Revised for all Pipe Supports Dwg.
* Checked & Revised for Mechanical Detail Dwg.
* Checked & Revised for General Piping Plant dwg.
* Make Summary report of Isometric Progress.
* Check & Revised Piping Under Ground Utility dwg.

July' 2003 – June' 2004
PetroChina Intl. - Companies in Indonesia
Senior Piping Designer / Checker - PDMS/PDS/Autoplant.
Betara Complex Development Project.

* Prepared Piping 3d Model Plant Dwg.
* Prepared shop fabrication Dia 10", 12" Gas/Oil Production Manifold standard Dwg.
* Prepared 3d Model Plant Dwg.
* Prepared Piping Isoplant Dwg.
* Prepared Piping Isometric Dwg.
* Prepared Tie-in Point Piping 3d Model Plant Dwg.
* Prepared 3d Model for Mechanical Detail Dwg.
* As-built Piping Plant Dwg.
* Supervised Piping construction area plant.
* MTO List Dwg.
* Modified Material Data Spec and Catalog.
* Checked & Revised 3D Model Mechanical Dwg.

Dec' 2002 – June' 2003
PT. Ceria Worley
Senior Piping Designer – Autoplant/PDMS.
Kerisi Wellhead (WHP-K), Hiu and CPP Platform Project

* Prepared Piping 3d Modules Kerisi Platform Preliminary Dwg.
* Prepared 3D Piping/Mechanical Model for Kerisi Platform Dwg.
* Prepared 3D Model for Oil/Gas Production Manifold at WHP & CPP Platform Dwg.
* Prepared 3D Model for HIU, WHP-K AND CPP Platform Dwg.
* Prepared 3D Model for Piping Hook-up Platform Dwg.
* Prepared Piping GA for HIU, WHP-K AND CPP Platform Dwg.
* Prepared Piping Access safety layout Platform Dwg.
* Prepared Bill Of Material (general report) of Piping GA Dwg.
* Clash Check for Piping 3D Model Dwg.
* Prepared / Designed Isometric dwg.
* Prepared Pipe support standard dwg.

Apr' 2002 – Dec' 2002
PT. Enerkon Engineers and Contractors
Piping Designer – Autoplant/PDMS
LPG and Sulfur Recovery Project – Pertamina
Cilacap Refinery - Indonesia

* Prepared Plot Plant Dwg Area 90.
* Prepared Piping Plant Tie-In Point (Existing).
* Check & Revised for Gas/Oil Production Manifold dwg.
* Prepared Pipe Rack plant Dwg Area 90, 91, 91, 92, 93, 94 & 95.
* Prepared Fire Water Plant Dwg.
* Prepared Nozzle Orientation for Mechanical Dwg.
* Make M T O.
* Prepared Tie-in Hot Tap Point From Existing Line to New SRU.
* Supervised and Line check Unit Plant Area.

* As-built Drawing.
4
Oct' 2001 – Apr' 2002
PT. Enerkon Engineers and Contractors
Piping Designer – Autoplant / Microstation/PDMS.
Caltex Project
Gathering Station 4,5 & 6 – Caltex

* Design & Revision P&ID New Wash Tank area Dwg.
* Design & Revision P&ID Existing Oil/Gas Manifold Dwg.
* Design & Revision P&ID Shipping Tank area Dwg.
* Design & Revision P&ID New clarifier Tank area Dwg.
* Design & Revision P&ID Existing clarifier Tank area Dwg.
* Design & Revision P&ID New water Injection area Dwg.
* Design & Revision P&ID Existing water Injection area Dwg.
* Design & Revision P&ID water Injection & Gas Handling
* Facilities Dwg.
* Design & Revision P&ID On Skid CBE Gas Compressor
* Plant Dwg.
* Design & Revision P&ID On Skid AWE#1 Gas Compressor
* Plant Dwg.
* Design & Revision P&ID On Skid AWE#2 Gas Compressor
* Plant Dwg.
* Design & Revision P&ID On Skid Compressor Liquid Handling Facilities Dwg.
* Design & Revision P&ID Vapor Recovery System Dwg.
* Design & Revision P&ID Mechanical Flotation unit Area Water Treating Facilities – Losf Area-1 Dwg.
* Design & Revision P&ID Filter & Water Softener Water Treating Plant - Losf Area-1 Dwg.
* Design & Revision P&ID Feed Water Tank Water Treating Plant –Losf Area-1 Dwg.
* Design & Revision P&ID Brine Facility – Losf Area-1 Dwg.
* Punch list plant area / line checker for all piping & instrumentation unit.
* Validation Plant Area Recheck for all Piping & Instrument unit As per Gathering Station Area.

Feb' 2001 – Oct' 2001
PT. Tripatra Engineering
Piping Designer – PDS/ Microstation
Four Pile Drilling and Production Platform
Serang "SA" Facilities Upgrade

* Draft & Revision piping plant above access platform produce water system and reject oil pumps area Dwg.
* Draft & Revision piping plant below cellar deck
* IP separator area Dwg.
* Draft & Revision piping plant upper level
* Draft & Revision piping plant above cellar deck
* Draft & Revision piping sections & details Dwg.
* Draft & Revision piping plant upper Gas compressor inlet / after cooler area Dwg.
* Draft & Revision piping plant above cellar deck Gas compressor inlet / after cooler area Dwg.
* Draft & Revision piping plant above cellar deck Gas compressor area Dwg.
* Draft & Revision isometric Dwg.
* Draft & Revision pipe supports Dwg.
* Draft & Revision piping plant & section Dwg.
* Draft & Revision Gas/Oil Manifold Standard Dwg.
* Draft & Revision P & ID Dwg.
* Draft & Revision PFD Dwg.
* As-built Drawing.

Feb' 2000 – Dec' 2000
PT. Multi Structure Engineer
Piping and Civil Structure Designer – Autoplant.
Thames PAM Jaya Project

* Prepared drawing layout for pipe situation.
* Material take off.
* Design pipe bridge & steel details.
* Line check area.
* Design & checker all shop drawing.
* Drafting and revision piping plant drawing.
* As-built drawing.

Oct' 97 – Feb' 2000
PT. Petrosea
Piping Designer – CAD/Microstation.
Inco Expansion Project
Fourth Exp. Project
* Prepared shop fabrication dwg, for all pipe supports
* Prepared shop fabrication for Oil/Gas Manifold & Mechanical dwg.
* Prepared isometric drawing, from piping plant drawing.
* Prepared isometric drawing, for all small bore pipe
* Checker piping plant drawing.
* Checker Isometric dwg.
* Draft & revision fire water system for conveyor belt drawing.
* Make summary data for all pipe support.
* Make registered dwg for all pipe supports.
* Make punch list of Isometric drawing.
* Make punch list of piping plant drawing.
* As built drawing for all piping plant drawings.
* As built drawing for all isometric small bore drawings.
* Make technical query of pipe support drawings.
* Make technical query of piping plant drawings.
* Make technical query of isometric drawings.
* Make summary report for all pipe support drawings.
* Punch list plant area / line checker.
* As-built Drawings.

Apr' 97 – Sept' 97
PT. Hardy & Kee Engineering
Field Engineer
PT. IKPT – Bontang ( Train 'G' )
Expansion Train 'G' – LNG Plant Project

* Line checker plant area.
* Punch list plant area.
* Prepared shop Fabrication for Gas/Oil Manifold & Mechanical dwg.
* Supervised construction plant area.
* Material take off..
* Prepared Pipe support.
* Prepared Isometric drawing.
* As built Piping plant drawing.
* As built Isometric drawing.
* As built Pipe support drawing.
* Checked piping plant drawing.
* Checked isometric drawing.
* Make technical query of pipe support drawings.
* Make technical query of pipe plant drawings.
* Make summary report for all pipe support drawings.
* Make summary data for all pipe support.
* Supervised for leak test.
* Supervised construction plant area.
* Supervised blow down test.
* Supervised hydro testing pipe.
* Supervised Pressured test pipe.
* Checker internal vessels & tanks.
* As-built Drawings.

July' 95 – Apr' 97
PT. Polysindo Eka Perkasa II
Senior Piping / Mechanical CAD Drafter
PT. PEP II Plant Karawang Project

* Drafted piping plant drawings.
* Drafted piping isometric drawings.
* Drafted piping layout drawings.
* Drafted plot plant drawings.
* Drafted silo tank drawings.
* Drafted vessels & tank drawings.
* Drafted P & ID drawings.
* Drafted flow instrument diagram drawings.
* Data entry material.
* Material take off.
* Punch list piping plant drawings.
* Punch list isometric drawings.
* Line checker plant area.
* As-built Drawings.

July' 94 – July' 95
PT. Moeladi
Piping Designer
LPG Recovery Plant Project

* Prepared piping lay out drawings.
* Prepared piping plant drawings.
* Prepared piping isometric drawings.
* Prepared shop fabrication for Gas/Oil Manifold drawings.
* Prepared material of piping.
* As-built Drawings.
* Drafted Layout of lighting electrical drawings.
* Drafted Layout of electrical grounding cable drawings.
* M T O.
* Supervised construction plant area.
* Line checker plant area.
* Witness.
* Prepared Hydro testing pipe.
* Checker internal piping / mechanical.
* Supervised blow down and leak test.
* Inspection plant area.
* As-built Drawings.

Apr' 92 – Mart' 94
PT. Wira Matra Guna Engineering
CAD Drafter
Expr II Project Balongan (Arco Project)

* Drafted piping plant drawings.
* Drafted Mechanical & Oil/Gas production Manifold dwg.
* Drafted piping isometric drawings.
* Drafted piping layout drawings.
* Drafted piping spool fabrication drawings.
* Drafted piping support drawings.
* Make M T O.
* Punch list drawings.
* As-built drawings.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 4001 to 4050 of 6411)Go to Search Parameters...
Brief Description
Production engineer, with strong knowledge in Rod Pumping, ESP, Gas Lift and softs related. Also production and inyection follow-up, project evaluation. Additionally experience in managment and operation.
Creating the Spool drawings for fabrication purpose using the Spoolgen Software.Input Files Taken from PDS, the Output is generated in Microstation,Checking the Generated Drawings & Documentation preparation.
Civil Engineer. Developing the 40 + retail outlet fro IOCL.IBP, Essar Oil in India.
Application Manager - Control Valves and Engineered Products
Project Engineering & Management
Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.
3 Years Diploma in Mechanical Engineering with 11 years experience in valve Engineering i.e. Sizing, Selection, Maintenance, Repair and Implementation of all types of industrial valves.
I am doing job in wireline logging in H L S Asia Ltd in India on the post of an operator. I am doing independent cased hole and open hole jobs on onshore and offshore and driving LMV and HMV.
NACE CIP LEVEL II COATING INSPECTOR, CERTIFIED PIPELINE WELDING INSPECTOR, HAZMAT
A wide on-offshore range of experience in heavy equipment maintenance. Managing and supervising day-to-day preventive maintenance (P.M.) using a computerised maintenance management system. (C.M.M.S.) Modify equipment and machinery using management of change documentation (M.O.C.) to improve rel
Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)
Petroleum Engineer having work experice for five years with a gians multinationals lioke Halliburton & Schlumberger in Reservoir & Production Engineering Areas
Experienced Senior Electricial Technician in oil refinery. Familiar with maintenance motors, transformers, generators and protection for the sames, frequency converters, power regulators, installing and programming PLCs etc.
Chemical Engineering / Chemistry graduate from the University of Minnesota
Mechanical engineer-Masters-2 years experience as research assistant-proficient in development and usage of Finite element codes and packages-actively looking for a job.
The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.
B.S. CHEMICAL ENGINEERING UNIVERSIDAD METROPOLITANA, Caracas – Venezuela • Minor: “Oil/Gas & Petrochemicals, Production Engineering” • Graduation Date: February 2002 • GPA: 3.55 / 5.00 N°10 in 21 graduates.
• Excellent interpersonal skills • Excellent leadership abilities • Thorough individual with good analytical skills • MS Power Point presentation skills • 4 years experience spanning academia and industry
Degrees in BSc(GEOLOGY) and BCom(FINANCE). Experience in E&P companies undertaking economic modelling, reservoir performance and completions, and development geology.
Bachelor of engineering degree in metallurgical and materials engineering (b.eng). grade: second class upper division.
Engineering background consisting of manufacturing, project organization, and design disciplines. Experience with factory and marine environments, office and fieldwork, and ability to interface with a variety of people.
A Chemical / Process Engineer
Over 5 years of experience in petroleum industry, including, but not limited to various aspects of management and monitoring of the oil fields, wide usage of environmental engineering, performing general overall supervision, conducting communication with vendors and consultants.
An engineering position with potential for professional growth and advancement.
Mechanical Field Engineer; 5 years experience; Industries: Construction, Oilfield Services & Transportation; Areas of Interest: R&D, Field Engineer, Project Management
Chemical/process engineer
Seeking a long-term position in the field of Information Technology or Consulting where I can learn and grow in a fast paced and rewarding environment.
Working Experience with CADCENTERS PDMS and INTERGRAPHS PDS-3D in various aspects of Basic and Detail Engineering including Project Planning and Implementation right from Development of Plot Plan, Equipment Layout, Piping Layout, to Isometrics, Design Review and Material Take off.
I am now looking to apply my many skills in a pipe drafting position. And along with my drafting and field experience I am confident that my newly obtained skills in assisting fabrication coordination of this project will be of great use in the design phase of all future projects.
Site Safety
I'm a reservoir engineer working for rashpetco(JV.of BG&EGPC)for the following topics:runing eclipse 100 simulation,kappa saphir wt analysis,prosper nodal analsis,mbal(MB software),gap(netwark),floviz,reservoir coupling,office,pvti,schudule,pss,petrel ,controlling the multi segmented wells
I am Engineer, MBA, Speak 4 languages, Excellent Computer Knowledge, I have done several courses in the Petroleum Industry. I've worked in a Shell Petroleum Refinery in the Engineering Area, Inspection, Maintenance, and Projects. Also in Economy of the Refinery working on the MIS and KPIs.
Senior Engineer: PLC SCADA Systems Experience in the Oil and Gas Industry (ESD and F&G Safety Systems)
I have 6 years experience in multidiscipline oil-gas companies with every stage of drilling , completion and workover operations as planning , supervision , technical services , logistic , maintenance.
I am a Petroleum Engineer that possesses technical expertise in petroleum economics evaluation, and reservoir engineering analysis with some reserves booking experience. In addition, I am very eloquent with Microsoft's office software and all windows environments.
Cuban Petroleum Engineer looking for work.
Solid management experience in professional Procurement (purchasing, quality control and logistics)
Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm
I am a chemical engineer with 15 year experienced in oil, gas processing and petrochemical plants (Polyethylene-LLDPE/HDPE/LDPE). Extensive experience in gas separation, purification, refrigeration, all type of compressors. Day to day activities of production plant and catalyst manufacturing.
7 years experience in the oil filed, (Mudlogger, Data engineer and a pressure engineer)
The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder being associated with the Onshore – Offshore Oil & Gas Plant industry. Experience has been gained in all aspects of Engineering Piping Design & drafting activities with the emphasize on piping plan, isometric, pipe spoo
Ten Years Of Effective Managerial/Sales Experience At The Professional Level
I am in a position to take full and independent charge of major plant overhauls related to boiler and its auxiliaries, intake equipment, fuel gas station and fuel oil handling station
Electrical Technician/Cell Phone Technician
Project Management
Electrical Engineer - Design and Estimation
Oil and Gas Drilling Professional
Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.
• Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles
Eight - year experience in Civil Engineering Projects.
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   [ 81 ]   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com