Resume - B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Expe...

Misco Jobs

Resume #72859

CONTACT INFORMATION:
View contact information...

Professional Summary:
* Total Five years of experience as a Design Engineer.
* "PG Diploma in Piping Technology" from VIT, Pune.
* "Bachelor of Engineering in Mechanical" from University of Pune.
* Deputed to Jacobs Antwerp, Belgium Office for 3 Months.
* Working on CAESAR II, Piping Stress Analysis Tool.
* Codes used - ASME B31.3, B31.1, API 520, API 560, API 610, API 617, API 661, API 662, NEMA SM-23.

* Well familiar with: -
1.Critical Line list preparation & System Definition,
2.Line Modeling & Analysis of lines connected to Heat Exchangers, Pressure Vessels, Columns, Pumps, Compressors, Turbines, Air-Fin Coolers, Storage Tanks, Column-Reboiler, Steam Drum and Rack Piping & Reactor Piping using CAESAR II.
3.Support type selection & Preparation, Checking of Special Support Sketches,
4.Use of Springs, Rigid Struts & Preparation of Spring Data sheet,
5.Slug force calculation & Analysis of Two Phase flow lines.
6.PSV Reaction Force calculation as per API520 & ASME B31.1.
7.Trunnion calculation check as per Kellogg's method,
8.Displacement Calculation & Feeding in CAESAR II,
9.Load Case Preparation & Checking Displacements, Loads & Stresses on Equipment Nozzles,
10.Flange Leakage Checking with Equivalent Pressure Method & ASME VIII Div 1.
11.Support selection for small bore (< 4") high temp. lines without Computer Analysis,
12.Modal Analysis of Pulsating lines connected to Reciprocating Compressors.
13.Using following Europian Standards EN 10216 Part2, EN 13480 Part2 & DIN 2615, DIN 2616, DIN 2617.
14.Flange Joint calculation as per DIN V 2505.
Work Experience:
1) JACOBS Engineering India Pvt. Ltd. (From 26th March 2007).
a) Project: BASF's Debottlenecking Anon-Destillate & PA6 Capacity Increase, Belgium.
Job Profile: Assigned as a Lead Piping Stress Analysis Design Engineer on BASF's Project to meet all quality, scope of work, budget, and schedule requirement particularly as it applies to Piping Engg. & Design. Analyzing a Stress Critical lines Connected to Pumps, Columns & Reboilers. Standards Referring EN 10216 Part2, EN 13480 Part2 & DIN 2615, DIN 2616, DIN 2617 & DIN 2505. Review Drawing to ensure sufficient flexibility in critical piping. Flange joint calculation with Equivalent Pressure Method OR as per DIN V 2505.

b) Project: TOTAL France Lindsey Oil Refinery.
Job Profile: Worked as a Design Engineer in Piping Stress Analysis Department on New Distilate Hydrotreater HDS-3 Plant. Assigned as an Area Lead Engineer for SMR Area. Worked on SWS, SRU & HDS Area.
Responsibilities: Worked independently on project to meet all quality, scope of work, budget, schedule requirement particularly as it applies to Piping Engg. & Design. Establish Critical Linelist to be stress analysed, Perform and oversee all Piping Stress Analysis activities carried out by stress engineers, assuring compliance with applicable codes (ASME B31.3) pertaining to piping systems and strain sensitive equipment (API610, API661, API560, NEMA SM23 etc), Nozzle-pro calculation and in accordance with Clients procedures and Design Guides, Analysis of Fired Heater lines of material P11 & temperature upto 550 deg C, Selection of Spring Hangers and preparing Spring Hanger data sheet,Trunnion calculation check as per Kellogg's method and Relief Valve reaction force calculation as per API520 & ASME B31.1. Develop temperature profile of Tower, Reactors etc. and review equipment drgs. To establish fixed supports for exchangers and re-boiler. Piping Stress Analysis, Support selection, Flange Leakage Check, Load data calculation etc. Loading calculations of piping systems on Pipe racks, Various Structures, Grade etc and providing inputs to civil. Review Study Drawing to ensure sufficient flexibility in critical piping. Co-ordinations with civil & Mechanical groups for load data, Vessel clips etc.
2) Toyo Engineering India Ltd. ( Joined On 1st July 2005)
Project: Ethylene Oxide & Ethylene Glycol Plant (Yanbu, Saudi Arabia).
Job Profile: Worked as an Assistant Piping Stress Analysis Engineer on Ethylene Oxide & Ethylene Glycol Plant (7000 TPD Capacity) of Yanbu National Petrochemical Company (YANSAB) Yanbu, Kingdom of Saudi Arabia.
Responsibilities included, Piping Stress Analysis, Support selection, Flange Leakage Check, Load data calculation etc. Analyzed lines connected to Pumps, Columns, Exchangers, Column-Reboiler, Compressor, Turbine, Air-Fin Coolers, Reactor, Steam Drum, Vessels, and Storage Tanks etc. Loading calculations of piping systems on Pipe racks, Various Structures, Grade etc and providing inputs to civil. Review Study Drawing to ensure sufficient flexibility in critical piping. Decide on position of fixed saddle of horizontal Heat Exchanger and Vessels. Co-ordinations with civil & Mechanical groups for load data, Vessel clips etc..
3) Petrofac Engineering (I) Pvt. Ltd. (Joined on Oct. 2004).
Project: Kashagan Field Development Experimental Program.
Job Profile: - Worked as Stress Engineer through N D Engineering. Worked on "Kashagan Field Development Project for Agip Kazakhstan North Caspian Operating Company" as a Piping Stress Analysis Engineer & Perform the following activities on CAESAR II ¡V
System Definition. Line Modeling in CAESAR II. Displacement calculation & feeding in CAESAR II. Pump Suction & Discharge lines, Compressor lines, Column, Air Coolers & Heat Exchanger Piping Modeling & their Static Analysis in CAESAR II considering all conditions. Load Case Preparation. Checking Displacements, Loads & Stresses on Equipment Nozzles. Flange Leakage Check. Basic knowledge of Layout, Support Design, use of Spring Hangers & their selection, Expansion Joints & Different types of Supports & Support Selection from Standards.

4) ZF Steering Gear (India) Ltd. (Joined On Sept.2003)
Company Profile: Company is engaged in manufacturing of Mechanical & Power Steering Gear of Light, Medium & Heavy Duty Vehicles that has got ISO/TS16949: 2000.
Job Profile: - Worked as Jr. Engineer in Design & Development Department & Perform the following activities ¡V
„Ï Design & Develop the Jigs & Fixtures as per requirement.
„Ï Preparation of 2D Drawings using AutoCAD 2000 Software.
„Ï Assisting in process planning for optimization of process sequence.
„Ï Maintain the ISO/TS16949: 2000 documents, filling up of Process Flow Diagram, Control Plan & Process FMEA.

Academic Information:
* Nov. 2002 Degree In Mechanical Engineering.
P.V.G's College of Engg. & Tech Pune, University of Pune.
Secured 55.53%, with Higher Second Class.
* Mar. 1998 Higher Secondary School Certificate.
M.J. College Jalgaon, Board of Nasik.
Secured 84%, with Distinction.
* Mar. 1996 Secondary School Certificate.
L.M.Patil Vidyalaya Rajora, Board of Nasik.
Secured 77.73%, with distinction.

Software Awareness:
* Operating System: DOS, WIN - 9X, WIN - 2K, WIN - XP.
* Packages: CAESAR II, Smart Plant Review, Design Review, Nozzle Pro-6.0,
AutoCAD 2000, Pro-e 2000i, i2.

Personnel Details:
Date of Birth: 17th July 1980.
Gender: Male.
Marital Status: Married.
Nationality: Indian.
Languages known: Marathi, Hindi & English.

Reference:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6411)

Go to Search Parameters...

Brief Description

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

To become a successful Planning Professional in a professionally managed

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

hard worker, work under pressure, creative, learning fast, energetic, have 3 languages:(arabic native language, english perfect, french good)

Working as reservoir engineer at maginal field for 5 years, can do petrel simuation, reservoir management.

Process Engineer, Chemical graduate, experience with engineering services for refining and petrochemical industries

Procurement Engineer

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out