Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #73049 next resume »»
CONTACT INFORMATION:
View contact information...

APPLICATION FOR THE POST: "Field Operator / Production Chemist"
"Marine Cargo Surveyor"
I am working in petroleum field since 1985 and I have got 18 years actual working experience in different petroleum industries in different areas like Quality Control, Field Operations, Production and Administrations. The details are given in the bio data, which is enclosed for your perusal.

Progressive experience in petrochemicals, refinery & lubricating plants as a "Technician " for both Quality Control & Plant Operations hence wishing to use this practical & theoretical knowledge wherever needed in above said areas in any petroleum industries.

Being Science Graduate (Bsc.-Chemistry) from Bombay University, Successfully completed 3 years accreditation course in "Laboratory Technology "at Bharat Petroleum Corp. Ltd, in their 12 MMTPA, a grassroots refinery at Mumbai.
I am thoroughly acquainted & fully conversant with almost all crude & petroleum products tests as per ASTM/IP/BS/API/SMS approved test methods.

I can set up, run, maintain & standardize an independent laboratory for Crude & Pet.Products as per ISO-9002 with all lab equipments standardization & calibration.

Performed Crude Oil loading & Analysis witnessing operations at Dubai /Fujairah/Jebel Ali offshore Fateh oil field,Alshaheen Qatar offshore ( Maersk Oil ).

Complete Analysis of Lubricating Oil, Base Oils, Mineral Oils, their Additives & all kinds of Greases like Wheel bearing/Chassies/Complex/Graphite/Moly Greases.

Complete Analysis of other Industrial Speciality Oils like Hydraulic/Turbine oils, Circulating Oil antiwear/antirust type, Compressor oils, Industrial Gear Oils, Gas Analysis of Propane, Butane, Natural gas, and Refinery Flue Gas analysis (H2, methane, ethane, CO & CO2) using Gas Chromatography, Ammonia, H2S, Acid & caustic samples.

At present I am working with Intertek Caleb Brett, Abu Dhabi, UAE since April 2008 as a Senior Petroleum Inspector (Chemist-Surveyor).

1) Post Applied for: "Field Operator / Production Chemist / Surveyor "
3) Date of Birth: 19th July 1967
6) Marital Status: Married, 2 Childrens ( 15,7 )
7) Nationality: Indian
8) Educational Qualification:

Exam Year of passing University/Board Main Subjects Marks %
Bsc.-Chemistry Dec.1988 BOMBAY Chemistry, Drugs, Dyes First Class
Diploma. in Lab Tech October 1988 NCTVT Trade Theory, Work shop, Science & Calculations, Engineering Drawings 78.92
HSC March1985 PUNE Physics, Chemistry, Maths(Technical) 54.17
(SSC Technical) March 1983 PUNE Physics, Chemistry, Maths(Technical) 70.86
Primary Education 1977-1982 BOMBAY Physics, Chemistry, Maths 54.17

Work Experience:

No. Period Organization Designation
1 Sept. 1985 to Sept. 1988 Bharath Petroleum Corp. Ltd. Bombay Lab Technician
2 Oct. 1988 to July 1990 Modern Oil Industries, Bombay Chemist cum Supervisor
3 July 1990 to April 1991 Unique Oils India Ltd, Bombay Junior Chemist
4 April 1991 to March 1997 Nandan Petrochem Ltd, Bombay Lab In-charge
5 March 1997 to Dec. 1977 Intertek-Caleb Brett, UAE (Sharjah) Lab Technician
6 Dec. 1997 to Sept. 2006 Intertek- Caleb Brett, Kuwait Sr. Petroleum Inspector
7 Sept 2006 to April 2007 Saybolt Dubai, UAE Sr. Petroleum Inspector
8 April 2007 to April 2008 Intertek-Caleb Brett, Qatar Senior Petroleum Surveyor
9 April 2008 to Present Intertek-Caleb Brett, Ruwaise, UAE Senior Petroleum Surveyor

Contact No: 0097150 7210599 (Mobile, UAE) 009712 8772217 (Office)
009122 27716488 (Res. India) 00919821207906 (Mobile, India)
E-Mail: anilsawant2004@hotmail.com

* Highest Educational Attainments: Bsc with Diploma in "Laboratory Technology"
* Languages Known: Good in English (Speak/read/write), Arabic (Speak)
* Driving License: Holding Qatar & Kuwait Driving Licenses.
* Present Salary: 2,200 $ per Month +Accommodation + 4/1 On/off with ticket & Salary.

SUMMARY OF EXPERIENCE:

Working in petroleum field since 1988 & have got 18 years actual progressive working experience in diff. petroleum Industries in diff. areas like, Quality Control, Operations, Sales, Purchase & Office Administrations including last 11 years in Independent Inspections Industries & Marine cargo survey as a " Petroleum Surveyor ( Chemist Inspector )" at Kuwait, Dubai,UAE & Qatar.
I have successfully completed 3 years accredation course as a " Laboratory Technician " at Bharat Petroleum Cop. Ltd in their 12 MMTPA, grass root refinery at Mumbai from 1985 – 1988.

Nine years worked with Intertek-Caleb Brett Kuwait, Middle East since March 1997. Joined as Lab Technician at Sharjah UAE & then successfully promoted as "Petroleum Inspector (Chemist Surveyor)" at Kuwait Operation & Qatar Branch.

At present working with Intertek-Caleb Brett, Ruwaise/Abu Dhabhi, Middle East since April 2008 as a "Senior Petroleum Inspector"

STRENGTHS:

* Familiar with almost all petroleum products testing method as per ASTM/IP/BS/API/SMS standard Test methods.
* Handles modern sophisticated instruments like GLC, GC, AAS, UV/IR Spectrophotometers, Potentiometers, Auto Titrators, Metrohm's Titrino & Colorimeters, Auto Karl-fischers Analyzers, JFTOT & WSIM Analyzer, and Research & Motor Octane Engines.
*Can setup run & standardize an Independent Laboratory for Crude & petroleum product as per ISO-9002 quality system.
*Fully acquainted with ISO-9002 Quality assurance system to conduct internal/external audits
* Completed all mandatory courses for Offshore Platforms, Rigs & Merchant Navy under STCW-95 from D.G. Shipping approved Marine Academies.
* Accredited as a "Surveyor / Petroleum Chemist-Inspector" for Caleb Brett group of Companies from Energy Institute & International Federation of Inspection Agencies.UK (IFIA).

OTHER SKILLS:

* Besides Quality Control Chemist as a profession, overall experience covers other areas as well, such as Field operations, production; sales purchase Administrations & Research-Development.
* Prepare reagents, standard & bench chemicals used in the lab & also responsible in making purchase requisition of lab supplies & chemical reagents
*Operate automated analytical instruments for both qualitative & quantitative analysis. Responsible for its proper maintenance & calibrations whenever needed.
* Good knowledge in handling fire fighting equipments & handling Computers.
* Licensed Driver, fully conversant with MS Office & E-mail / Internet applications.
* Neatness, Accuracy Thoroughness & General Professionalism in presentation of works.

April 2008 – Present ITS Caleb Brett, Ruwaise as: "Senior Petroleum Surveyor"

Loading & discharging of Crude at Jebel Dhana, Products, LPG, dry cargo & chemicals at ADNOC Terminal & Refinery, Bunkering & On-Off Hire Bunker survey.Export survey for quality & quantity & Export costody samples analysis witnessing at ADNOC at Ruwaise Refinery lab & GASCO.Calculations of quantity on board/loaded on vessel & delivered from terminals. Attending Dry cargo loading like Sulphur & Urea at Fetil Terminal.

April 2007 – April 2008 ITS Caleb Brett, Qatar as: "Senior Petroleum Surveyor"

Attended loading & discharging of Crude, Products, LPG, dry cargo & chemicals at Mesaieed, Ras Laffans ports, Al Shaheen offshore, Qatar anchorage, Bunkering & STS transfer of vessels.* On-Off Hire Bunker survey * Attended crude export survey for quality & quantity at Halul Island & at Al Rayyan Anadarco offshore terminals.* Calculations of quantity on board/loaded on vessel & delivered from terminals.

Sep 2006 – April 2007 Saybolt Dubai, UAE as: " Senior Petroleum Surveyor "

Attend full Independent Marine survey at Fujairah offshore, anchorage station, Jebel Ali port, Hamariyah port. Port Rashid & Khalige port. Bukering & STS transfer of vessels prior to load, transfer & discharge. * On-Off Hire Bunker survey * Analysis witnessing at terminals & refinery laboratories as per client's request. * Calculations of quantity on board/loaded on vessel & delivered from shore.

Dec. 1997 - Sept. 2006 ITS Caleb Brett, Kuwait. as: "Petroleum Inspector"
(Chemist Surveyor)
Attend Independent Marine survey, Quality/Quantity inspection of vessels prior to load, transfer & discharge. * On-Off Hire Bunker survey * Inspections of LPG Shipments. * Analysis witnessing at terminal & refinery laboratories as per client's request. * Analysis of all kind of petroleum products. * Calculations of quantity on board/loaded on vessel & delivered from shore & thus investigate loss, discrepancies, demurrages, dead freight followed by issuance of protest to vessel/Terminal on behalf of receiver/supplier. * Run & maintained Caleb Brett Kuwait laboratory for full crude oil analysis as per ISO-9002 with due standardization & Calibrations of all instruments.
Handling instruments like Centrifuse Machine, Hot Air Ovens,Karl Fisher moisture meter,water by distillation,Analytical balance,Salt in Crude Analyzer,Sediment in crude by Membrane & Thimble extraction methods,Digital density meter,Sulphur Analyzer,H2S/RSH meter.

Mar.1997 - Dec.1997, ITS - Caleb Brett, Sharjah: "Laboratory Technician"

* Analysis of all petroleum product, crude gas & chemicals as per ASTM/BS/API standards.* Attend loading & discharging operations of petroleum products at Jebel Ali port, Dubai for the Terminal/Depot like..Shell Caltex, Dugas, Emirate & Star Energy. * Attend De-Ballasting survey to control oil in ballast water discharge.* LPG (C3 & C4) loading & Analysis witnessing, re-certification at Dugas Terminal, Jebel Ali port, Dubai. * Attend Methanol discharge & MTBE loading operation at Jebel Ali port, Dubai. * Handled Bunker Quality/Quantity survey & claims for discrepancies at Fujairah, UAE.* Attended loading & Analysis witnessing at Offshore Dubai Fateh oilfield & Qatar offshore Alshaheen Terminal.

From April 1991 to March 1997 Nandan Petrochem Ltd: "Lab Incharge"

Responsible for Quality Control, Formulations, looking daily production & other Administrative works related to sale dispatch. Analysis of raw materiel, Base oils Additives & all finished products. Carryout diff. formulations at lab scale Research & Developments. * Also responsible for develop & formulate new Industrial specialty products such as Lead Naphthanate, Rosin Concentrate, Sulpharised Fats, Soluble/Neat/Synthetic Cutting Fluids, Textile Auxiliaries, Rust preventive Oils, Oil//Solvent base De-Watering Fluids, Oil Degreaser & Metal drawing Compounds. Carryout pilot blends & introduce them into the market & then re-improved them as per client's requirements against their feedbacks. * Formulate & supply other lube oils, which are raw materiel for other lubricating manufacturing industries.

From July 1990 to April 1991 Unique Oils India Ltd. as: "Junior Chemist"

Analysis of raw materiel, Base oils, Additives & finished products.
Blending of Automotive engine lubricants, Hydraulic Oils, Greases, Turbine Oils & Industriel Speciality Lubricants.

October1988 to July 1990 Modern Oil Industries as: "Chemist-cum-Supervisor"

LDO //LSHS distillation plants manufacturing Spray Oils, Calibration Oils & White Oils by distillation & refining which are used as a raw materiel in manufacturing Rust preventive oils, Metal working fluids, Textile Auxiliaries, Flushing Oils & other industrial Oils. Responsible for all plant operations, production, Quality Control & Administrations.Tested all products for Flash Point, pour points Kinematic Viscosity @ 40/100 C, Karl Fischer Moisture analyzer& Metrohms Auto Analyzers for Sulphur & TAN/TBN.

From Sept. 1985 to Sept. 1988 Bharat Petroleum Corp Ltd: "Lab Technician"

* Thoroughly acquainted & fully conversant with almost all Refinery petroleum products test as per ASTM / IP / BS / API. Test methods covering Physical, Chemical & Instrumental Analysis. Analysis of Bitumen,Reformate,Naphthas,Kerosenes,Motor Spirits,Gasolines,Fuel Oils,Hexane,Benzene,Toluene,Mineral Turpentine,Gas Oils,High Speed Diesels,Waxy Distillates,LSHS,Water Analysis ( Boiler blow down / Effluent & De-mineralized water ), Gas analysis & Catalyst analysis.
Analysis of all types of oils steams samples from all refineries' unit as per IP/ASTM test methods for the operation specification on round the clock basis.
* Responsible for the preparation & standardization of Analytical reagents and periodically check their concentrations to maitain highest level of accuracy.
* Operated automatic Analytical instruments for both Qualitative & Quantitative analysis.Also responsible for their proper calibrations & maintenance.
Handles all types of sophisticated fully automatic petroleum Testing Instruments like.GLC,GC,AAS,UV/IR,Spectrophotometers,Potentiometers,Auto Tritrators,Metrohm's Titrino& Colorimeters,Auto Karl-fischers,JEFTOT & WSIM Analyzer,Research & Motor Octane Engines.Oil & Grease Analyzer

*************************************************************

View contact information...
«« previous resume next resume »»
Search Results (Resumes 3951 to 4000 of 6411)Go to Search Parameters...
Brief Description
Seeking a position as an executive with responsibilities for better performance, skills improvement and emphasis on environment for teamwork for company as well as personnel growth.
A Process Engineer with 2 years oil and gas experience covering appointments in operational support, offshore operation and engineering design. Demonstrates first-class academic results alongside strong problem solving and communication skills.
I am currently a Reservoir Engineer working for an engineering firm in Houston, Texas. I graduated from Petroleum Engineering at the University of Alberta in May 1999. Academic qualifications include a GPA of 7.75 out of 9.00 in the year of my graduation.
It is the summing up of what I have done in my career till today.
A qualified Engineering (Electronic Instrumentation & control) professional with core strength in the area of automation.
CV
Chartered Staff Process Engineer with over 5 years experience covering North Sea Oil & Gas Production and UK Refining. Currently responsible for both short and long term process optimization for a Chevron Texaco Platform.
Dear Sir, APPLICATION: DRILLING ENGINEER EDUCATION LEVEL: UNIVERSITY DEGREE COURSE/ CERTIFICATE: BSC MECHANICAL ENGINEERING EXPERIENCE: MOBIL PRODUCING NIGERIA - DRILLING ENGINEER
Breakdown Quantity for Project Construction, Mining and Project Control specialist.
SCADA/Automation/Electrical and Controls Engineering Management
Chemical Enginering, Refineries, Process Eng., Production, Gas, & Quality Control
Science Chemistry graduate with total 18 years experience in petroleum field in Quality control & operations. Last 12 years in Gulf countries as Petroleum Inspector- Chemist Surveyor in Marine cargo inspection business.
I am skilled in an oiled servicing company and I hold an ND in electrical/electronics engineering.
As an experienced civil/Building engineering (more than twenty years) I am willing to participate in your construction projects.
Respected Sir > I am BTech in Chemical Engineer as well as Diploma in Petro-Chemical Technology. Having 2 + years of Gulf Sales experience in the Oilfield Industrial product& equipment
I have completed three years diploma in chemical . and now i work in pakistan oilfield as plnt operator last three years. and now i want join internationl level compane
Instrument Technician
Field Engineer, Strong Electrical Background
I Have 4 years of exp in design of diesel engine power train components in reputed R&D AVL Technical center,Having good knowledge in PRo-e,got 1 year special training in Graz Austria on engine design
December 2000 to 2003 Field technician in the field of power system protection. Power Industry.
B.E mechanical + piping in petrochemical /power plants + service of diesel engines + autoCAD
Certified Tester and a Bachelors Degree
Chemical Engineer with 08 Yrs Exp. in Operation/Technical Sevices/Project Execution-Erection,Commissioning and Start Up
Piping Designer
Knowledgeable in electrical technology 1&2, Three phase AC machine, Overhead line system, Electrical motor & controller, PLC, Power Supply Unit, Main Switch Board, AC Generator, Power Electronics, Electrical Sub Station,Fire Alarm System, High Voltage Underground Cable.
You can rest assured that I am mature, organized, self-motivated and possess good communication skills in my daily task activities
I consider myself responsible, available, an esaygoing person at the sometime i serius in job and my personality and i like to be sociable
service engineer with six years experience
SADRA Shipyard at Neka-Iran-Caspian Sea Manager of Planning of the Projects Work Schedule for the Khazar Semi Submersible Drilling Unit,(Project value: USD 300 million)&Oil tanker 4800dwt&Tug boat1200&4400hp&Sincro lift(Capacity3000t)&Oil storage tanks Capacity9000&6000m3)&Cutter Suction Dredger
I would like to apply with your organization for the position of an Offshore Telecommunications Specialist where I can use my extensive background and significant experience to help you obtain your company's mission.
Over 10 years of oil field production experience. With expertise in the following: supervision, operations, acidizing, fracturing, maintenance.
Engineering Professional with over four years experience in the oil and gas industry in reservoir development with expertise in the design, execution and evaluation of production projects
I have been working in this field for over 10 years now. Done work in both maintenance and construction in the past. In dealing with the Start-up/Commissioning of various projects, I have gained knowledge of Computer control systems, DCS, PLC, Pneumatics and dealing with customers one-on-one.
Background in OLGA modeling of subsea tiebacks and dry trees. Analyzed steady-state and transient multiphase flow fluids through wells and pipelines. Posses a good understanding of wax deposition and gas hydrates in flow lines.
OBJECTIVE I would like an opportunity with a world-class operation in which I could utilize my experience with advance technologies and modern production methods to achieve the profitability, quality and service goals of the organization.
I am a young, dynamic, confident result-oriented and self-motivated graduate of Chemical Engineering with two years of experience in the Oil and Gas industry.
engineering in dcs and plc system specialy YOKOGAWA CENYUM CS et CS3000 Prosafe PLC and APACS DCS of MOORE. GE MARK V and SUVIMAC II+
Over 5 years experience in Steel Structure
I got extreme training in Radiographic , Ultrasonic, MagneticParticle, and PenetrantTesting. I have 3 years of experience in Ultrasonic Testing Level II (UT).
Currently in Drafting and Design program @ ITT Tech. Over 10 years in QA & Document Data Control
All aspects of pipeline operations, surveying, vast array of computer knowledge
I quickly learn new concepts, am proficient at multi-tasking, work well under pressure, and communicate ideas clearly and effectively.
I hold MS degree in Environmental Eng and a BS degree in Civil Eng. I have hands on experience in implementing & leading ISO 14001 EMS, waste management, environmental audits, inspections, monitoring, risk assessments, EIAs, remediation studies, and for the last 6 years working in Oil & Gas industry
I'm mechanical engineer, I also have a mention in petroleum engineer, I did my practices in companies such as Repsol YPF, Pacifpetrol S.A, and I did visited Weatherford to get information for my thisis of degree.
Having Diploma(3 years) in Instrumentation Engineering with 8 years Exp. in Oil/Gas field (Offshore / Onshore) projects, commissioning, maintenance.
I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.
Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.
Free! i am a qualified Chemical and petroleum engineer with a masters degree, with upto 2 years experience in the exploration and production sector of the oil and gas field both in the field and design while using various softwares.
Geodetic Engineer exposed to various types of horizontal and vertical survey and can handle different geodetic engineering position.
Qualifications: Teesside University: 1st Year HNC Instruments, Cleveland College: BTEC National Cert Engineering, BTEC First Cert Engineering.
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   [ 80 ]   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com