Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #73056 next resume »» CONTACT INFORMATION: View contact information... Electrician- Pellet Plant Maintenance Dept. Onesteel,So. Australia March 12, 2008 – Present Principal Responsibilities Support plant operations for continuous production of pellets. Switchgear operations. Conduct fault finding on the plant's electrical power and control system during malfunctions. Performs motor terminal disconnection, insulation testing and reconnection of AC and DC electric motors. Conduct inspections on electrical equipment using vibration and infrared instruments and provide recommendations according to recorded readings. Perform inspections on SCADA network devices/ PLC's. Performs electrical installations according to AS/NZS 3000:2000 Wiring Rules. Performs Low Voltage and High Voltage isolation and switching. Performs other functions as per Supervisor's directives. Switchyard Engineer September, 1997 – September 15,2007 (10 yrs.) PNOC–EDC, Transmission and Dispatch Department Principal Responsibilities Operates and maintains the high voltage switchgears and all electrical equipment of the power plant switchyard. Scope voltage is at 230 kV. Performs electrical installation, wiring, connections, testing and troubleshooting of control systems. Conduct report interfacing with CE power plant and FCRS operators. Performs control room operation at the Marshalling Substation. Logs hourly the system parameters as indicated in the SCADA computer display and control panels such as voltage, power, amps and vars on an official data form for future reference. Examines in detail any deviation of data recorded and reports to supervisor immediately so that preventive measures would be undertaken to avoid potential hazards to equipment and personnel. Prepares reports on all relevant activities and events that occurred on the switchyard such as trippings, equipment malfunctions, modifications on the equipment and safety issues. Gives briefing to incoming shift Engineer regarding the events that occurred, the present status of the high voltage system and all equipment of the switchyard, power plant status, steam production operation and explains the logged reports. Perform other jobs as ordered by the Supervisor. In the event of Power System Trippings and Switching Operations Coordinates with supervisor when doing switching operations on the high voltage equipment and switchgears in the switchyard and ensures that the tasks are properly carried out. Switches on / off PCBs done from the switch control panel or SCADA computer. Switches on / off DS done on the switch control panel or on the DS local control box. Switches on / off ES manually. Ensures they are engaged properly when closed. Put lock-outs and tags when doing repairs or servicing after de-energizing the high voltage bays Coordinates with power plant operators and gathers necessary information from the plant's protection relay indications and reports it to supervisor. Records relay indications of the switchyard protection system and report it to supervisor. Resets lock-out relays when faults are cleared to facilitate start up of generating units and auxiliaries of the power plant. Clears the area with personnel and other unnecessary materials prior switching on the DS and PCBs energizing the switchyard. Ensures that proper personnel protective equipment is worn when operating the high voltage switches. Implements housekeeping before leaving the area. Logs details of the activities. In case of Equipment Breakdown, Malfunction and Hazards Reports immediately any occurrence or early signs of equipment malfunctions, damages and hazardous conditions. Facilitates repair of the affected equipment thereby avoiding costly downtime, possible injury to persons and possible damage to company property. Operates the fire fighting equipment in case of an outbreak of fire to save company properties from being damaged. Comply all safety rules and regulations according to the standards set in the company policies on safety. Electrical Equipment Testing and Preventive Maintenance Testing of Switchyard HV and Auxiliary Equipment Tests the operating temperatures of the switchyard equipment live terminal connections with a Thermographic Scanner. Daily or weekly depending on the condition of the equipment. Tests the operating temperatures of the battery charger electronic components and power supply transformers using a handheld Infrared Thermometer. Daily or weekly depending on the condition of the equipment. Tests contact resistance of the power circuit breakers, disconnect switches and grounding switches using a Micro-Ohmmeter. Normally done during annual maintenance shutdown or depending on the condition of the equipment. Tests the contact time travel of the power circuit breakers using the Breaker Analyzer test instrument. Normally done during annual maintenance shutdown or depending on the opportunity and condition of the equipment. Tests resistance of the primary and secondary windings of transformer with Micro-Ohmmeter and compares resistance data against manufacturer's specifications. Tests specific gravities of batteries with a hydrometer. Measures cell voltage and cell temperature. Refills with distilled water if specific gravity and electrolyte levels are low. Clean battery terminals, apply grease and tighten connections. Done monthly or when condition permits. Tests the insulation resistance of power supply cables, using a Megger set at 5kV.Normally done during annual maintenance shutdown or depending on the opportunity and condition of the equipment. Measures the temperature of 480 V power supply circuit breakers and cables for overheating and overloading using Infrared Thermometer. Done daily Ensures that proper work permits are issued prior any maintenance activities involving single or several personnel. Proper safety, wearing of Personnel Protective Equipment and the established tag-out/lock-out procedures are strictly implemented Logistics Assistant May, 1994 – September, 1997(3 years) PNOC–EDC, Operations Services Division Principal Responsibilities Conducts outsourcing of hauling and lifting equipment for the transport of the consumable supplies and chemicals and rig equipment during the scheduled mobilization of the land based drilling rigs whether company owned or rented. Expedite shipment, domestically, of various supplies, chemicals, drilling tools and equipment, heavy and light equipment, rig components and other materials which are used by the Drilling, Civil Construction and Production divisions of the Company. Lecturer June 1991 – March 1993 Jose Navarro Polytechnic College, Leyte, Phil. Teach Mathematics AC and DC Motor Control Systems Power and Lighting Circuit Design SEMINARS/TRAINING Engineering/Technical AS/NZ 3000:2007 Wiring Rules 23 April,2008 PEER VEET,South Australia Basic Quadlog Safety PLC Programming February 18 – 29,2008 SS Technologies,Phil. Principles of Protective Relaying, Control and Monitoring February 07 – 11, 2000 ABB, Philippines IIEE 2nd 1997 Visayas Regional Conference July 17 -19, 1997 IIEE, Philippines Industrial Motor Control Wiring and Maintenance May 19 – July 01, 1992 Dualtech, Philippines Industrial Instrumentation and Process Control February 24 -27, 2003 Cal Energy, Phil. Operations Employee Orientation on Policies and Geothermal Operations November 17 – 20, 1998 PNOC – EDC, Philippines Safety and First Aid Basic Life Support July 15, 2004 Philippine National Red Cross First Aid Training for Industrial Employees July 13 – 14, 2004 Philippine National Red Cross First Aid at Oil and Gas Drilling Rig May 09 -10, 2003 ODTDCI, Philippines Introduction to Hydrogen Sulfide (H2S)/SCBA May 08, 2003 ODTDCI, Philippines IADC Rig Pass Orientation and Basic Safety Awareness May 5 – 07, 2003 ODTDCI, Philippines PROFESSIONAL MEMBERSHIP Institute of Integrated Electrical Engineers (IIEE) of the Philippines OTHER INFORMATION Computer Literacy – Intermediate in Microsoft Office (Word, Excel) Passed the AS/NZS 3000:2000 Wiring Rules, April 23, 2008 Australian TRA Assessment- General Electrician Temporary Working Visa SC 457 CHARACTER REFERENCES Will be provided View contact information... «« previous resume next resume »» Search Results (Resumes 3351 to 3400 of 6411) Go to Search Parameters... Brief Description Piping supervisor (fibrication,construction,test package reviewing , witness for pressure test with the consultant) i speak two language (english and italian) and i have 27 years of experiences 14 YRS EXPERIENCE IN OIL & GAS FIELD IN INSTUMENTATION. Seismic adquisition, oil data management, geology, mining management My name is RAJENDRA T CHAVDA, I am INSTRUMENT TECHNICIAN, I have working exp. in this field more then 7.5 years. before i was working Russia and Abu bhabi (OFF SHORE) and India chem. and petro. chem Being given to understand from reliable sourse that thei Supervisor, Quality, Process, wastewater Instrument and Electronics Technician SCADA Engineer I am graduated in Petroleum &Gas engineering and have total experience in drilling engg & Drilling technology, such as Drilling engineer, Night Pusher & Night Company man. 13 years experience in the field of QA/QC, inspection, NDT, welding, painting, ISO, mech. equipments etc. Chemical Engineer, PGDBM, Advanced Process Control Engineer (RMPCT,SMOC/RQE), DCS(Yokogawa CS3000, Yokogawa Centum XL, Honeywell TDC3000), Process Simulation To take all the assignments as a challenge in order to uplift and maintain the goodwill. Dignity and growth of the concern that providing me knowledge, experience and growth of my career. Extensively perform integrated study to generate reservoir characterization and geological modelling for field development plan within multidisciplinary team Performed all troubleshooting, preventive and predictive maintenance on monitoring and control systems for petrochemical production operations. I can test, troubleshoot and correct production related processes through monitoring and control systems, safety standards in accordance ISO 14001. As Reservoir/Petroleum Engineer, I have around 5 years of working experience with BP Pakistan E&P Inc. Earlier, I had done my Master's in Petroleum Engineering and bachelors in Mechanical engineering. Have excellent experience on the development of small oil and gas assets. I am a well rounded geologist and am excited about applying my skills, as well as learn new ones, to the benefit of myself and my company. My MS is in structure and mineralogy from UNC Chapel Hill and my BS from SUNY Binghamton in geology with a concentration in geophysics as well as geomorphology. -MS in Chemical Engineering -More than 3 years of experience in production and process upgradation with chemical process industry. -2 years of research experience in Natural gas processing -Proficient in CHEMCAD, ASPEN and HYSYS simulators. Numerical/Experimental Study of Flow through Porous Media, Flow Visualization, Extensive C/C++, Matlab and Fortran programming experience, Production Engineering, Subsurface Modeling, Reservoir Engineering and Simulation, Production and Operations Engineering and Petroleum Economic Evaluation. Objective: Career in Mechanical field, which affords an opportunity to utilize my qualification and join with a creative & innovative engineering team. I have graduated with honours as a Bachelor of Chemical Engineering from The University of Melbourne. My desire is to put the diploma to use in the marketplace and to continuously learn new skills and improve existing ones. Mechanical Engineer holding a Metallurgical and Materials Engineering Master of Science from the Colorado School of Mines, Golden, CO USA. Experiences in Automotive, Welding R&D, Welding Marketing. Eager to relocate and travel Internationally. Fluent in Italian, English, French and German Objective: To seek a position as Field Engineer in Petroleum/Oil/Gas company Seeking for Mudlogging job B.Tech in Electronics Engineering with over 8 years of professional experience in SCADA, PLC System and Control Panel Design in UAE, USA, and India. Experience in welding inspection for the past 14 yrs, onshore and offshore experience. Involved in fabrication of Offshore steel structures, Chemical plants, Refinery, FPSO Turret Fabrication, both structural/piping. Interpreter films, CSWIP certificates, Diploma in EWF, IIWI. I am an extremely committed and enthusiastic post-graduate with a wide range of skills. I am keen to learn new things, accept new challenges and firmly believe I would be a valuable addition to your team. High School Diploma A/B PLC 5, SLC 5/03 Wonderware HMI SCADA HVAC maintenance Generator maintenance Instrumentation technologies Electronics level 1 AC and DC drives Ross Hill SCR IPS SCR Instrumentation technologies Journeyman certificate (Alberta) With Red seal status I am procurement engineer who have worked several years in oil and gas fields in middle east. Dedicated and internationally experienced individual with a broad range of knowledge in engineering, finance, and consulting within the oil industry. Possesses a master's degree and five years of applied professional experience. Skilled in conducting economic portfolio reviews of various assets. I am an Electrical engineer working as Sr. Engineer Electrical in Cairn Energy India Ltd, a UK based Oil and Gas Industry in India. I am having nearly 7.5 years of Maintenance experience in large petrochemical and Oil and Gas Industry in India. Fourteen- (14) years experience of detail structural engineering in various on shore field which include oil refineries, gas treating facilities on shore platforms, well-head and inter-connection bridges, industrial building. To acquire a Full time/Internship position as Natural Gas/Chemical Engineer that utilizes my logical, interpersonal and technical expertise I would like to seek the new environment of working experience with the new culture religion, creativity and innovative which can increase my self-esteem to be a project manager in future. Graduated this year from IT-BHU( chemical engg.) More than 5 years of experience in office administration for domestic and international exploration and production corporations. Experience in geology and engineering programs. Strong background in user training and support documentation. Finished mechanical engineering with 68%.software skills: autocad,solid works, catia v5, ansys Electrical engineer with experiance in Testing, Quality, Maintanence MINING ENGINEER and SUPERIOR TECHNICIAN OF HYGIENE AND SAFETY ON WORK Over 18 years of proven expertise in Material Planning & Management, Negotiation, Procurement, Vendor Development, Logistics, and ERP System SAP. Entry level engineer with a B.S in Chemical Engineering. Internship experience at a quality control lab overseas. Basic HYSYS experience, Strong communication skills and fluent spanish. Power utilities equipment switching operation and maintenance.Fault finding ,rectification during breakdown of equipment.Computer literate. B.E Mechanical Engineering and also completed NDT Level II as ASNT Standards Ppetrochemical ngg, my completed pg dip in piping engg . Seven (7) years of experience in the application and exercise of Welding Inspection and Non-Destructive Testing in engineering industries, refineries, power plants, fabrication yard and general oil and gas industries. QUALIFICATION : DILOPMA IN MECHANICAL ENGG.,BASIC CORRSION PROTECTION I have 7 years international field experience as a Drilling Engineer and Supervisor with Saudi Aramco and Suez Oil Company SUCO (joint venture RWE) in drilling and workovers of Oil and Gas wells. MS Dos, Windows-98, 2000, XP.AutoDesk Inventor 11.0,Office-2007,XP,2003, Maintenance and troubleshooting all instrument devices such as flow,Temp,level,Pressure measurement,analytical devices (Gascromatograph,O2,Moisture,Co2,So2,No2,PH,Conductivity analyzers)including DCS,PLC,ESD and Fire Gas system. Familiar with Windows-based PC,Software/Hardware,Network and Office I'm recognized for my Confidence, Aggressive Nature,I had been involved in working on different kinds of projects like Batch process reactor, Building management system, Traffic management, A Technical Sales & Services officer with a comprehensive experience in plant maintenance instruments sales and services matters mostly in Power plants, Fertilizer, Cement, Oil & Gas and Sugar Industry. Able to work individual and as a part of team. BMSE with TX PE First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   [ 68 ]   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last Seach Parameters Change search parameters... CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com