Resume - 6 years experience of offshore structural engineering in FEED, detailed design, ...

Misco Jobs

Resume #73135

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
6 years experience in modeling, design, fabrication, installation, integrity assessment and decommissioning of offshore structures and facilities. Conversant with offshore structural analysis software such as SACS. Familiar with international codes and standards/procedures (AWS, API, AISC, BS, PETRONAS Technical Standards, SHELL Engineering Standards etc) with regards to design, fabrication, installation and HSE matters with working experience in various part of Asia Region.
------------
OBJECTIVE:
------------
To pursue and enhance skill, knowledge and experience in offshore structural engineering towards expert level.
------------
WORK EXPERIENCE:
------------
RnZ Integrated O&G Engineering (Malaysia) Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Structural Integrity Assessment of Erb West Drilling Platform
(EWDP-A), PETRONAS Carigali Pvt Ltd
DATE: 04/2008 - PRESENT
Part of RnZ Integrated O&G Consultant (M) team for EPCC of Melor Development Project (MLDP-A), PETRONAS Carigali which consists of 8-legged jacket with 8 skirt piles and topsides with facilities of drilling platform and helideck. The overall weight for the whole structure is 8000MT.

The assessment involved model review, soft mooring analysis and in place analysis which to be updated, justified and enhanced as per latest facilities layout, as built drawing, Soil Investigation report and previous Structural Integrity Assessment (SIA) report.

RnZ Integrated O&G Engineering (Malaysia) Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Detailed Design of Melor Development Project (MLDP-A),
PETRONAS Carigali Pvt Ltd
DATE: 02/2008 - 06/2008
Part of RnZ Integrated O&G Consultant (M) team for EPCC of Melor Development Project (MLDP-A) which consists of 4-legged jacket and topsides with facilities of drilling platform, vent boom and helideck.

Involved in Detailed Design stage for topsides structures with total weight of 1700MT. All analysis, calculation, AFC drawings and reports by using Structural Engineering Software (SACS) such as In-Place Analysis, Loadout Analysis, Transportation Analysis, Lifting Analysis and Miscellaneous Report (Plate Design, Blastwall Design, Boom Rest, Padeyes, Stringer Design, Telecommunication Tower Design etc) have been hands-on executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API RP-2A, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES). The Detailed Design stage have been successfully completed in 3 months period (ahead of 1 month schedule based on approved Planning Package).

RnZ Integrated O&G Engineering (Malaysia) Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Detailed Design of Laho Development Project (LHDP-A),
PETRONAS Carigali Pvt Ltd
DATE: 03/2008 - 06/2008
Part of RnZ Integrated O&G Consultant (M) team for EPCC of Laho Development Project (LHDP-A) which consists of 4-legged jacket and topsides with facilities of drilling platform, vent boom and helideck.

Involved in Detailed Design stage for topsides modules with total weight of 1500MT. All analysis, calculation, AFC drawings and reports by using Structural Engineering Software (SACS) such as In-Place Analysis, Loadout Analysis, Transportation Analysis, Lifting Analysis and Miscellaneous Report (Plate Design, Blastwall Design, Boom Rest, Padeyes, Stringer Design, Telecommunication Tower Design etc) have been hands-on executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API RP-2A, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES). The Detailed Design stages have been successfully completed in 3 months period (ahead of 1 month schedule based on approved Planning Package).

PETRONAS Carigali Pvt Ltd
POSITION: SENIOR STRUCTURAL ENGINEER
PROJECT: Fabrication of Sumandak Selatan Development Project (SUPG-B)
DATE: 05/2007 - 01/2008
Involved in fabrication activity at Sime Darby Engineering fabrication yard for 6-legged jacket and 5 topsides modules with MSF with total weight of 15000MT. All calculation, Shop drawings, NDE drawings and procedures such as Project Standard Procedure, Lifting Procedure, Trial Fitting Procedure, Weight Control Report, Management of Structural Surplus Material List, Shiploose list, Loadout Procedure and Weighing Procedure have been executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES). The fabrication activity have been successfully completed in 9 months with achievement of 1 day ahead of schedule, low repair rate of less than 0.5% and zero LTI.

PETRONAS Carigali Pvt Ltd
POSITION: SENIOR STRUCTURAL ENGINEER
PROJECT: FEED and Detailed Design of Sumandak Selatan Development
Project (SUPG-B)
DATE: 02/2007 - 05/2008
Part of PETRONAS Carigali team for EPCC of Sumandak Selatan Development Project Phase-2 (SUPG-B) which consists of 6-legged jacket and 5 topsides modules with MSF with total weight of 15000MT.

Involved in FEED and Detailed Design stages at RnZ Integrated O&G Consultant (M) for 5 topsides modules and MSF with total weight of 15000MT. All analysis, calculation, AFC drawings and reports by using Structural Engineering Software (SACS) such as In-Place Analysis, Loadout Analysis, Transportation Analysis, Lifting Analysis etc have been hands-on executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API RP-2A, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES). The FEED and Detailed Design stages have been successfully completed in 3 months period (ahead of 1 month schedule based on approved Planning Package).

Involved in FEED and Detailed Design stages and at Sime Engineering Pvt Ltd for 6-legged jacket with total weight of 5000MT. All analysis, calculation, AFC drawings and reports by using Structural Engineering Software (SACS) such as In-Place Analysis, Loadout Analysis, Transportation Analysis, Pile and Conductor Drivability Analysis, Floatation and Upending Analysis, Dynamic & Static Launch Analysis etc have been executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES). The FEED and Detailed Design stages have been successfully completed in 2.5 months period (ahead of 1 month schedule based on approved Planning Package).

PETRONAS Carigali Pvt Ltd
POSITION: SENIOR STRUCTURAL ENGINEER
PROJECT: EPCIC of Puteri Drilling Platform
DATE: 01/2007- 02/2007
Part of PETRONAS Carigali support team for EPCIC of Puteri Drilling Platform which consists of 4-legged jacket and 9 slots drilling topsides with total weight of 3000MT at Kencana Engineering, Lumut, Perak, Malaysia. The job scopes involved of procuring of Jacket Leg diaphragm closures, Globe valves of Jacket Leg Flooding System etc.

PETRONAS Carigali Pvt Ltd
POSITION: SENIOR STRUCTURAL/CONSTRUCTION ENGINEER
PROJECT: Fabrication of Sumandak Drilling Platform A (SUDP-A)
DATE: 05/2006 - 01/2007
Part of PETRONAS Carigali team for EPCC Sumandak Drilling Platform A (SUDP-A) Phase 1 with total weight of 9000MT at Sime Darby Engineering yard, Teluk
Ramunia, Johor, Malaysia.

Involved in fabrication activity at Sime Darby Engineering fabrication yard for 4-legged drilling jacket (pre-installed 18nos curved conductors) with total weight of 9000MT. All calculation, Shop drawings, NDE drawings and procedures such as Project Standard Procedure, Lifting Procedure, Trial Fitting Procedure, Weight Control Report, Management of Structural Surplus Material List, Shiploose list, Loadout Procedure and Weighing Procedure have been executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES). The fabrication work have been successfully completed in 8 months with achievement of 1 day ahead of schedule, low repair rate of less than 0.14% and zero LTI.

PETRONAS Carigali Pvt Ltd
POSITION: SENIOR STRUCTURAL ENGINEER
PROJECT: Detailed Design of of Sumandak Drilling Platform A (SUDP-A)
DATE: 01/2006 - 05/2006
Part of PETRONAS Carigali team for EPCC Sumandak Drilling Platform A (SUDP-A) Phase 1 with total weight of 9000MT at Sime Engineering Pvt Ltd Kuala Lumpur, Malaysia.

Involved in Detailed Design stage at Sime Engineering Pvt Ltd for for 4-legged drilling jacket (pre-installed 18nos curved conductors) with total weight of 9000MT. All analysis, calculation, AFC drawings and reports by using Structural Engineering Software (SACS) such as In-Place Analysis, Loadout Analysis, Transportation Analysis, Pile and Conductor Drivability Analysis, Floatation and Upending Analysis, Dynamic & Static Launch Analysis etc have been executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API RP-2A, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES). The Detailed Design stages have been successfully completed in 3 months period (ahead of 1 month schedule based on approved Planning Package).

PETRONAS Carigali Pvt Ltd
POSITION: SENIOR STRUCTURAL ENGINEER
PROJECT: EPCIC of Abu Cluster Drilling Platform - A
DATE: 12/2005 - 01/2006
Part of PETRONAS Carigali support team for EPCIC of Abu Cluster Drilling-A Platform which consists of 4-legged jacket and 12 slots drilling topsides with total weight of 4500MT at Ramunia Fabricator, Johor, Malaysia. The job scopes involved of reviewing NDE drawings, Safety procedures etc.

PETRONAS Carigali Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Installation of Baram BAKP-B CPP Platform
DATE: 09/2005 - 12/2005
Part of PETRONAS Carigali installation team for Baram BAKP-B CPP Platform at Baram-B Field, Miri, Malaysia with total weight of 10000MT. The installation happened at Baram-B Field, 30km NW of Miri, Malaysia. The job scopes involved are reviewing drawings, reports and procedures (using MOSES - Naval Arc Software) with regards to installation and seafastening aspect of 5500MT BAKP-B Jacket (Launching), pile through jacket drivability, 4000MT BAKP-B Modules and 1000MT Interconnecting Bridge.

PETRONAS Carigali Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Installation of Baram-H Drilling Platform
DATE: 07/2005 - 09/2005
Part of PETRONAS Carigali installation team for Baram-H Drilling Platform; Jacket (BAJT-H) at Baram H Field, Miri, Malaysia with total weight of 4500MT. The installation happened at Baram-H Field, 25km NW of Miri, Malaysia. The job scopes involved are reviewing drawings, reports and procedures (using MOSES - Naval Arc Software) with regards to installation and seafastening aspect of 4500MT BAJT-H Jacket (side lifting) and pile through jacket drivability.

PETRONAS Carigali Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Installation of 4km 6" Pipeline for Baram-H Field
DATE: 06/2005 - 07/2005
Part of PETRONAS Carigali installation team for installation of 4km 6" Pipeline from BAJT-H to BAP-B at Baram H Field, Miri, Malaysia.

PETRONAS Carigali Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Fabrication of BAKP-B & BAP-B Interconnecting Bridge
DATE: 02/2005 - 06/2005
Part of PETRONAS Carigali team for fabrication of Interconnecting Bridge of BAKP-B and BAP-B platforms with total weight of 1000MT at Sime Darby Engineering yard, Teluk Ramunia, Johor, Malaysia.

Involved in fabrication work at Sime Darby Engineering fabrication yard for Interconnecting Bridge of BAKP-B and BAP-B platforms with total weight of 1000MT. All calculation, Shop drawings, NDE drawings and procedures such as Project Standard Procedure, Lifting Procedure, Trial Fitting Procedure, Weight Control Report, Management of Structural Surplus Material List, Shiploose list, Loadout Procedure and Weighing Procedure have been executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES). The fabrication activity has been successfully completed in 4 months with achievement of 1 day ahead of schedule, low repair rate of less than 0.5% and zero LTI.

PETRONAS Carigali Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Fabrication of Baram BAKP-B CPP Platform
DATE: 08/2004 - 06/2005
Attached to PETRONAS Carigali site team for fabrication of 6-legged jacket for BAKP-B CPP platform with total weight of 5500MT at Sime Darby Engineering yard, Teluk Ramunia, Johor, Malaysia.

Involved in fabrication work at Sime Darby Engineering fabrication yard for BAKP-B CPP platform with total weight of 5500MT. All calculation, Shop drawings, NDE drawings and procedures such as Project Standard Procedure, Lifting Procedure, Trial Fitting Procedure, Weight Control Report, Management of Structural Surplus Material List, Shiploose list, Loadout Procedure and Weighing Procedure have been executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES). The fabrication activity has been successfully completed in 8 months with achievement of 1 day ahead of schedule, low repair rate of less than 0.5% and zero LTI.

PETRONAS Carigali Pvt Ltd
POSITION: SENIOR STRUCTURAL ENGINEER
PROJECT: Detailed Design of Baram BAKP-B CPP Platform
DATE: 04-2004 - 08/2004
Part of PETRONAS Carigali team for Baram BAKP-B CPP Platform at MMC Engineering (Malaysia) Pvt Ltd in Kuala Lumpur, Malaysia.

Involved in Detailed Design stages at MMC Engineering (Malaysia) Pvt Ltd for BAKP-B CPP platform with total weight of 5500MT All analysis, calculation, AFC drawings and reports by using Structural Engineering Software (SACS) such as In-Place Analysis, Loadout Analysis, Transportation Analysis, Pile and Conductor Drivability Analysis, Floatation and Upending Analysis, Dynamic & Static Launch Analysis etc have been executed, developed, reviewed and endorsed with regards to safety, quality and international specification and codes i.e. API RP-2A, AWS, AISC, CAP 437, PETRONAS Technical Standards (PTS), SHELL Engineering Specification (SES).

PETRONAS Carigali Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Baram-A and Betty Revisit Platform
DATE: 04-2004 - 08/2004
Seconded to Aker Kvaerner Oil and Gas Consultant (M), Kuala Lumpur, Malaysia and involved in modification/maintenance work for offshore platform such as Baram-A and Betty at Baram and Betty Field, Sarawak, Malaysia. The work scope involved re-design and re-analysis the integrity of the existing cracked boatlanding. SACS (Structural Analysis Computer System) has been used in order to ensure the integrity of the existing platforms are still compliance with technical and safety regulations.

PETRONAS Carigali Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Samarang SMJT-D and SMJT-H Revisit Platform
DATE: 01/2004 - 04/2004
Involved in modification/maintenance work for offshore platform such as SMJT-D and SMJT-H at Samarang Field, Sabah, Malaysia. The work scope involved re-design and re-
analysis the integrity of the existing cracked boatlanding. SACS (Structural Analysis Computer System) has been used in order to ensure the integrity of the existing platforms are still compliance with technical and safety regulations.

PETRONAS Carigali Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Decommissioning of Baram BA-08 Platform
DATE: 06/2003 - 01/2004
Involved in offshore decommissioning operation for BA-08 Tripod Structure with total weight of 2200MT at Baram-A Field in Malaysia region as PETRONAS Carigali representative together with Sarawak Shell Berhad. Structural Engineering Software has been used for developing procedures and reports such as Lifting Analysis with regards to international codes and specification such as API RP-2A and AISC. The abovementioned operation involved dredging, cutting, lifting, transporting and reefing activity. Deal with the Project Management Team and Offshore Installation Contractor in order to ensure quality workmanship and strict compliance with technical and safety regulations.

PETRONAS Carigali Pvt Ltd
POSITION: STRUCTURAL ENGINEER
PROJECT: Detail Design of Ruby-B Platform (Vietnam)
DATE: 03/2003 - 06/2003
Seconded to Surface Engineering Department (line department); involved in assisting Ruby-B Project team in Vietnam field. Responsible to review all design and calculation upon request from Ruby-B Project Site Team such as calculation on the reliability of pedastal crane and have been checked with AISC (American Institute of Steel Construction) and PETRONAS Technical Standard (PTS).

PACE Engineering Pvt Ltd
POSITION: CIVIL / CONSTRUCTION ENGINEER
PROJECT: Construction of 13-Storey High Rise Building for Perak State,
Malaysia
DATE: 08/2002 - 03/2003
Involved in managing and monitoring 13-Storeys high rise building for High Court of Perak State Government in Malaysia. The work scope involved earth work activity, construction of building and to coordinate with client and contractors in order to ensure all technical aspects and safety regulations complied with the requirement.
------------
EDUCATION & CERTIFICATION:
------------
ACADEMIC QUALIFICATIONS
Bachelor Of Engineering (Civil/Structural), 2002
University of Technology Malaysia
(With Second Class Upper; CGPA=3.16)

TECHNICAL QUALIFICATIONS
Certified Civil/Structural Engineer by Board of Engineers, Malaysia; BEM

TECHNICAL TRAINING
1. Protective Coating Technology & Application Control
(Sigma Kalon, Malaysia) January 2005

2. PETRONAS Skill Group 11- Civil/Structural Engineering
Level II:
- CONSTRUCTION TECHNOLOGY
- OFFSHORE PLATFORM DESIGN
- FEASIBILITY STUDIES
- FOUNDATION DESIGN
- INSPECTION & MAINTENANCE
- PIPELINE ENGINEERING
- SOIL INVESTIGATION
- STRUCTURAL INTEGRITY
- WELDING TECHNOLOGY
(Institute Technology of PETRONAS) September 2004

3. PETRONAS Skill Group 11- Civil/Structural Engineering
Level I:
- SOIL INVESTIGATION
- OFFSHORE PLATFORM DESIGN
- PROJECT FEASIBILITY STUDY
- FOUNDATION DESIGN
- PIPELINE ENGINEERING
- WELDING TECHNOLOGY
- CONSTRUCTION TECHNOLOGY
- STRUCTURAL INTEGRITY
- STRUCTURAL MAINTENANCE INSPECTION
(Institute Technology of PETRONAS) August 2004

4. PETRONAS Exploration and Production (E&P) Core Workshop
(Institute Technology of PETRONAS) June-July 2004

5. DNV Floating Structures Workshop
(Institute Technology of PETRONAS) Apr 2005

HSE COURSES/TRAINING
1. Sea Survival & Offshore Safety Procedure
(MSTS, Johor Bahru) 2007
2. Basic Offshore & Emergency Training
(MSTS, Johor Bahru) 2007

------------

ADDITIONAL INFORMATION:
------------
LANGUAGE PROFICIENCY:
1. MALAY/INDONESIA
2. ENGLISH
3. ARABIC
4. URDU
5. HINDI
6. CHINESE (CANTONESE)

Hobbies:
1. Reading
2. Outdoor activities (fishing, travelling etc)

Citizenship:
Malaysian

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6411)

Go to Search Parameters...

Brief Description

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

To become a successful Planning Professional in a professionally managed

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

hard worker, work under pressure, creative, learning fast, energetic, have 3 languages:(arabic native language, english perfect, french good)

Working as reservoir engineer at maginal field for 5 years, can do petrel simuation, reservoir management.

Process Engineer, Chemical graduate, experience with engineering services for refining and petrochemical industries

Procurement Engineer

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out