Resume - TO BE ASSOCIATED WITH AN ORGANISATION THAT PROVIDES CHALLENGES APPROPRIATE TO MY...

Misco Jobs

Resume #73176

CONTACT INFORMATION:
View contact information...

* Profile: 28,Male,Single Nationality: Indian
* Current Location: Dammam,Saudi Arabia
* Passport No. A-6578056 Date of Issue 05.04.1999
* Date of Expiry 04.04.2009 Place of Issue Srinagar.
* Valid International Driving License

* Current Position: Instrumentation / DCS Engineer
* Current Company: Saudi Basic Industries Corporation (SABIC)
* Salary Expectation: Not Specified/Negotiable

B.E Electronics & Communication (Bangalore University, Bangalore), Session 2001.
F.Sc Pre-Engineering (Gandhi Memorial Higher Secondary School, Srinagar, Kashmir), Session 1996.
S.Sc (Standard Public High School, Srinagar, Kashmir).

To Be Associated With an Organization That Provides Challenges Appropriate To My Core Skills In An Environment That Natures And Promotes A Culture Of Continuous Learning And Growth.

ORGANIZATIONS SERVED & TECHNICAL EXPOSURE:

SAIFCO CEMENTS PVT LTD INDIA (May 2001 – June 2003)
BONAIRE SABOO S.R.I KSA (AUG. 2003-May 2006)
INSTRUMENTATION INSTALLATION & MAINTAINANCE CO.LLC, KUWAIT (June2006 - Dec 2006) ARABIAN CONTRACTING AND ENGINEERING CO, DOHA,QATAR (1st Jan 2007 – Jan 2008)
SAUDI BASIC INDUSTRIES CORPORATION. (SABIC) AL-JUBAIL KSA (Jan 2008 to Present)

SAUDI BASIC INDUSTRIES CORPORATION. (SABIC)
Position: Instrumentation Group Leader

JOB SUMMARY:
Management and engineering of all plant instrumentation, systems and control, to ascertain a highly reliable and efficient operating plant. This job requires a thorough understanding and knowhow of diverse systems and control applications and equipment particularly Distributed Control Systems, Emergency Shutdown Systems, Advanced Process Control, Programmable Logic Controllers, Vibration Monitoring Systems, SCADA Systems, Plant Information System, and various analyzer systems. This job also entails a broad knowledge of all field instruments significant to monitoring vital process parameters such as pressure, temperature, flow, level etc.

FUNCTIONAL RESPONSIBILITIES:

* Study and analyze plant systems necessitating improvements and optimization.

* Monitor the performance of critical systems and control equipment.

* Key person in analyzing shutdown events by interpreting alarm messages as captured by Emergency Shutdown system, Distributed Control System, Programmable Logic Controllers etc.

* Design additional instrument loop drawings from field to Emergency Shutdown System/ Distributed Control System.

* Design and develop interlocking logics and configurations as required by the Operations.

* Testing and commissioning of additional interlock and loops to ensure proper functionality.

* Oversee execution of function tests and loop checking.

* Design any modifications necessary on a particular control applications such as a control circuit wiring to meet the required functionality as specified by Operations.

* Managing capital projects, as well medium-scale engineering improvement projects.

* Prepares the Scope of Work and Bill of Materials for all assigned projects.

* Technical evaluation of contractors/ vendors' bids, preparation of Purchase Requisitions, and, study and evaluation of manufacturer's product application.

* Supervise contractors to ensure quality control and adherence to recognized standards.

* Recommend spare parts stocking and brand replacement for standardization purposes.

* Conducts technical study and author the Technical Report that goes with it for proper documentation.

* Conducts training and coaching on Operations and Maintenance personnel regarding proper operation and maintenance of all categorized instrument, systems and control equipment.

ARABIAN CONTRACTING AND ENGINEERING CO.
Position: Lead Electrical & Instrumentation Engineer

Functional Responsibility:

* Working as a Lead E&I Engineer (Electrical & Instrumentation) in the EPC-BA Department, looking for the Turnkey solutions of Oil, Gas, Energy, Fertilizers & Water Treatment Plants.
* Nature of job to provide Co-ordination & Expertise in Design, Procurement, Sourcing & Construction of the Electrical & Instrumentation scope of the project including ICSS (Integrated Control & Safety System), DCS, F&G (Fire & Gas), Chlorination system, ESD (Emergency Shut Down System), PLC, Microprocessor Relays & Field Control instruments.
* Well versed with Honeywell EXPERION (Process Knowledge System) PKS & ABB / Industrial IT- Advant Master DCS and have done complete package Comparison for the next coming oil & Gas Field projects like ADCO.
* 10MGD Water Treatment Plants West Bay & Gharaffa, Reservoir Associated with Ras Laffan pipelines and Madinat Al Shamal RPS and Associated pipelines(QATAR):
* The project was awarded to M/s ARABIAN CONTRACTING AND ENGINEERING CO Qatar in Aug 2006. Job responsibilities included design & approvals from consultant KEO International,Mot Mac-Donald and client (Qatar General Electricity & Water Corporation). I am nominated as Lead Electrical & Instrumentation for the same Project on Design, Procurement & Execution Works.\
* Participated in the Client/Consultant meetings held on weekly basis to show the progress of project as ACEC E&I representative.
* Job responsibility also includes preparation of International and Local Tenders for complete substation projects as well as substation equipments i.e. Protection Relays, Control and Relay Panels, Circuit Breakers, Surge Arrestors etc. Looking after the national and international trade of the department & Engineering design drawings of SIMOPRIME, 8BD, 8BK, MV & LV, Control & Relay Panels.
* Design drawings P & ID's for complete water treatment plants according to ANSI/ ISA Standards
* Design Schematic drawings for central Automatic Filter control Panel needed for backwashing during Filters washing process including all the instrumentation design of flow, level, and pressure instruments with 4-20mA signals to Main central Indication panel.

* Design Schematic drawings for central Indication, instruments panel, RTU panel,& Mimic panel including all flow recorders, level recorders, alarms & Indication acknowledgment lights etc.

* Design drawings for instrument loop diagrams / instruments cable layout, I/O list for control system & Instruments index etc.

* Design schematic logic drawings for Motor control centers (Relay Logic), Selection of motors starters, VSD Selection & Motor operated valves (MOV Actuators).

* Design schematic Single line power & instrumentation control drawings.

* Design calculations for power & instrumentation cable sizing, transformer design sizing according to continuous/ stand by load, generator design sizing according to critical/ emergency load, power factor improvement bank design sizing according to raise up to 0.85 pf.

* Requisition of different electrical materials & field instruments control valves like ball valves, gate valves, butterfly valves (Pneumatic/ Electrically operated).

IMCO, KUWAIT (Electrical & Instrumentation Engineer)

JOB SUMMARY:

Responsible in the upkeep of all plant instrumentation systems and equipment to ensure the integrity of all categorized monitoring and regulatory systems such as Distributed Control Systems, Programmable Logic Controllers, SCADA systems and Machine Vibration Monitoring Systems, Flow, Pressure, Level and Temperature instruments, like transmitters, sensors and proximity switches, and final controlling elements, such as valves, relays, transducers, converters etc. Executes routinely preventive maintenance procedures on all categorized instrumentation and control systems and equipment based on schedules develop by the Supervisor. Troubleshooting instrument related problems

FUNCTIONAL RESPONSIBILITIES:

* Replacement of Bently Nevada 7200 series conditioning Monitoring system for rotating equipments in Mina Abdullah Refinery,
* Provided technical guidance and day-to-day supervision of the electricians and their workload
* Simatic PLC S7 300 CPU Logic tests for Remote Tapchanger Panel & ABTS (Auto Bus Transfer Panel). Troubleshoot & Modify Various Interconnection Schemes using as Ladder Logic(LL) or Functional Block (FDB).
* Functional Testing of HITACHI 230KV & 69KV GIS through Local, Mosiac Mimic Control Panel & SCADA.Also Verified all the interfacing & interlocking of the schemes for the operation of Circuit Breakers & Isolators.

* Testing of 7VH, 7RW,7PA30, 7PA27, MVAX,DTTR, Lock Out relay, IVT¡¦s, MVTT14 Timer relay, RXBA Voltage difference relay, transducers, ammeters, voltmeters & Power Logic meters, SCADA Functional Checks.

BONAIRE SABOO S.R.I
Position: Electrical and Instrumentation Engineer

JOB SUMMARY:

Supervise a group of electricians on a project based basis in the installation of electrical and telecommunication systems and utilities. Responsible in monitoring and reporting the weekly/monthly progress of all electrical installation. Estimates materials requirements needed by the project. Coordinates with other discipline field engineers and contractors.

FUNCTIONAL RESPONSIBILITIES:

* Supervision of project based electricians during construction of the project.

* Prepare monthly/weekly work schedules and targets, and evaluate progress against overall programmes.

* Prepare work instructions, determine craft and estimate man-hours and materials requirements.

* Close technical supervision of works to check adherence to applicable procedures and standards particularly on areas classified as safety related.

* Maintains records of electricians, electrician qualifications and performance, and make recommendation for re qualification.

* Provided technical guidance and day-to-day supervision of the electricians and their workload.

* Calculated quantity of materials and manpower to meet Project budgets.

* Prepared material requisition, managed electrical contractors and vendors.

* Worked closely with the Senior Project Manager to check and revised drawings, specifications, load calculation sheets and contract documents to settle outstanding claims to ensure timely completion of the project.

* Subcontract finalization.

* Prepare technical drawings based on customer order, sought approval from customer and incorporated modifications.

* Provided estimates to the clients regarding the costs involved in the project.

* Provided technical guidance and day-to-day supervision of the electricians and their workload.

* Calculated quantity of materials and manpower to meet Project budgets.

* Prepared material requisition, managed electrical contractors and vendors.

* Maintenance & troubleshooting, calibration experience on continuous process plant equipment.

* loopchecking,controlvalves,Actuators,Flow/Pressure/Temperature/LevelTransmitters,controllerrecorders(electronic &pneumatic type).

* Read and understand PLC Panel Drawingsloopchecking,controlvalves,Actuators,Flow/Pressure/Temperature/LevelTransmitters,controllers,recorders(electronic &pneumatic type).

* Read and understand PLC panel drawings, Electrical panel drawings, Instrument loops, PID, Loop drawings.

* Work on TDC3000, Modicon, Triconix, Nevada, ABB, Honeywell, Emerson Process Management, Siemens Energy and Automation, Rockwell Automation, Invensys Foxboro, Yokogawa, Rosemount, Smar, Endress & Hauser programming with PLCs, Panel Views, and various duties related to Industrial Automation.

* Designing and programming automation systems for process and industrial equipment using new and / or existing equipment and programs. Design and manufacture relay and PLC control panels for OEM Equipment.

* Troubleshoot all controls from PLC to component level. Educating customers and journeymen on the automation of PLCs, Drives, and Panel view Screens. Limit Switches, Photo Sensors Thermally Delayed Overload relays, Time Relays, Inductive Proximity Switches, Photoelectric Proximity Switches, Control Switches, Vacuum Pump, Centrifugal Fans, and Conveyor Belts. Experience with PLC, Simatic S7 300/400/SCADA/DCS system.

SAIFCO CEMENTS PVT LTD INDIA
Position: [Traniee/(Electrical and Instrumentation Engineer)

JOB SUMMARY:

Study and analyze plant systems and control equipment such as the Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), process analyzers, intercom system, Private Automated Branch Exchange system (PABX), Field Control Stations (FCS), Information Command Stations (ICS), various laboratory equipment, Local Area Network server (LAN), telephone system, etc. Develop programs and procedures for the predictive, preventive and corrective maintenance of all categorized plant system and control equipment. Coordinate with other discipline in carrying out maintenance programs.

FUNCTIONAL RESPONSIBILITIES:

* Responsible for safe operation and routine & preventive maintenance of electrical L V power supply system, Merlin Gerin control panel, various MCCs, standby D G sets etc.
* Analyzed equipment failures to determine causes and recommend solutions.
* Operation & Maintenance of Switchgears, Circuit Breakers,PLC / SCADA systems
* Preventive maintenanace and troubleshooting of SMART/Conventional process instruments like transmitters control valve, actuators, flow metering device, gas analysers
* Experience in basic and detailed Engineering, process design, projects execution, product commissioning, technology transfer using modern simulation. equipment to include hydraulic, pneumatic controls.
* Working with automated instruments such as Flow Meters, Level Sensors, Pressure Switch, Vacuum Sensors, Temperature Controllers, Contractor / Relays, Coupling Relays, Circuit Breaker, Limit-Switches, Photo Sensors and Vision Control. Software and plant modifications.

TRAININGS AND SEMINARS ATTENDED

* PLC with Simatic S7 300/400 in SIEMENS LTD.
Technical Skills Development Centre, Kalwa Works, Thane Belapur Road, Thana-400601 Maharashtra State, India.

* Participated in the training of Project Management System (PMS), Fixed Asset Management
System(FAMS), Finance & Control & Bidding Proposals Orientation in
Qatar General Electricity And Water Cooperation Doha, Qatar from July 25 to July30, 2007.

* Advanced Process Control and Optimization Course
Conducted by: Honeywell ACS-GST, Mansour Belhadj
Venue: Qatar General Electricity and water cooperation

* Energy Savings with Electronic Reduced Voltage Starters
Conducted by: Siemens
Venue: Qatar General Electricity and water cooperation

* Fire Fighting and Protection Techniques
Conducted by: TYCO
Venue: Qatar General Electricity and water cooperation

* Trainer's Training: Increasing Training Efficiency in the Worksite
Conducted by: Renato Macalinao/Elena Estareja
Venue: Qatar General Electricity And Water Cooperation

STUDY PROJECTS:

The idea of switching electrical appliances using telephone line. The system is based of dual tone multi-frequency (DTMF) to switch ON/OFF various electrical appliances by means of microprocessor 8085.

SPECIAL SKILLS:

Excellent trouble-shooting skills. Ability to start and finish a job with little to no instruction. Able to learn different hardware and software very quickly, again with little to no instruction. I communicate very well with customers, employers, employees, vendors, and plant workers.

TECHNICAL SOFTWARES & EQUIPMENTS FAMILIARITY:

* DIGSI4.6 Software for Operation of Siemens Numerical Relays
* CAP 540 Software for Operation of ABB Numerical Relays
* SIMATIC STEP S7 Software for the Operation & monitoring of Siemens PLC.
* Siemens ProTool/ Pro & WinCC for onsite & higher level visualization system.
* MS Word, MS Excel, MS Project, MS Power Point, Windows 9X / 2000 / XP, Vista
* Auto Cad 2000, Verilog HDL, VHDL,Atmel 89C51 Microcontroller, Assembly (8086/8088), Matlab,

Ref:- On request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 6411)

Go to Search Parameters...

Brief Description

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

Petroleum engineer with over 16 years of industry & regulatory background in production & injection well drilling, design and operations; including regulatory aspects.

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing ,Installation , Fault Finding , Conversion , Modification , Commissioning ,Surveying , Repair, Running And Maintenance

Offers more than ten years of versatile experience in all phases of petroleum, gas, and alternative production facility operation. Equipped with a master’s degree in chemical engineering and a background in the development of PFDs and P/IDs. Excels at risk/hazard review and mitigation.

Professional DCS expert with 8 Years experience in process automation projects for pharma, oil & gas sector, Lead engineering and Project Engineering experience.

Mud engineer

Designer (In J Ray McDermott Engineering Services Private Limited, Chennai, From Aug. 2007 to Jul.2008

8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).

Mechanical Commissioning & Maintenance, Maintenance Planning Scheduling

TO BE ASSOCIATED WITH AN ORGANISATION THAT PROVIDES CHALLENGES APPROPRIATE TO MY CORE SKILLS IN AN ENVIRONMENT THAT NATURES AND PROMOTES A CULTURE OF CONTINUOUS LEARNING AND GROWTH

Process Engineer

I worked five years of the oil field to the national company of geophysics (ENAGEO) in south of Algeria as land surveyor engineer and two years of the mining field to the company of the barite mines (SOMIBAR) in north of Algeria as engineer surveyor

Educational Qualifications:1. Master of Technology in IndustrialSafety Engineering from NIT, Trichy with 85% marks (8.5 CGPA) 2. B.E in Mechanical Engineering with 81.77%. Experinece: 1. From August 2006 to till now - Working as Safety Engineer in Mina Abdullah Refinery of KNPC

Instrument & Control System Design Engineer

I had worked as Development & Design Engineer in Jordan Petroleum Refinery for several years .My work includes Design of static and rotary equipment according to international codes.Also Im holding Master degree in mechanical Engineering that gives advantage to go through research and development.

Analytical Chemist in the field of QA/QC/R&D for Beverage and Water Treatment

Sr. Engineering Technician with 15+ years of industry experience at both Regional and Corporate levels. Highly proficient with Aries and Microsoft Office as well as an IT background.

Business Analyst-Information Technology

ATTENDING BREAKDOWNS IN PLANTS

6 yrs exp.in fired heaters of peroleum .involved in design /documentation & cordination with other discplines

Geologist with a very strong experience in most of the oil/gas drilling operations

A highly qualified, talented and result driven marketing management professional, an AMIE and also holds a diploma in maintenance management with an experience of 15 years in the maintenance, Reliability Engineering as well as conditioning monitoring of rotating machinery. A dynamic, team spirited

More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct

Gas Turbine Repair Engineer

B.E., (Bachelor in Industrial Engineering from Indian Institution of Industrial Engineering),

B. Sc. Chemistry (Grade Good)

Well Qualified, Skilled & Experienced proffer in Design, Consultancy, R&D in Civil, Structural, Geotechnical, Architectural and Industrial Engineering

16 years of Piping & Pipelines Projects execution experience in the Industries Refinery, Hydrocarbon and Oil & Gas (Project piping, pipelines, Tanks, structurals, equipments). Knowledge of ASME Sections, ANSI, API & DIN codes /Standards.

Pipeline Integrity Engineer with Metallurgical & Material Engineering background, extensive experiences in the oil/gas both Offshore and Onshore (and swamp) pipelines.

FEA ENGINEER-ANSYS,HYPERMESH,ABAQUS

Masters in Electrical Engineering. Four year experienced. Skills: MATLAB, PLC Programming, Simulation,HSPICE,MULTISIM, Assembly Language, AutoCAD, Visual Basic, C/C++, Operating Systems

I am a 26 years young & energetic, self-motivated diploma Structural Fabrication engineer (Associate Degree) with a total seven years experience in checking & detailing engineering drawings of steel structures & equipments for Refinery Projects.

Sr. Structural Engineer-Ports, Marine & Offshore 8 years experienced, with knowledge of SACS, StaadPro, SAP

BE Electronics, Experience in Project erection & Commissioning of Electrical & Instrumentation, Procurement of Elec & Inst. Materials

Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.

Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field

Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.

Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.

OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry

PIPING STRESS ENGINEER

Pipeline Construction, Horizontal Directional Drilling, surveying, ground surveying, for number of River crossings in India & abroad

Experienced mud engineer

Over 8 yrs. experience in Inspection & QA/QC functions encompassing inspection of equipments for oil\gas and power generation projects, NDE of piping, pipelines and structural welding, qualifying WPS, PQR, WQT, dev. of inspection methodology & QA procedures for oil -gas projects

Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.

I am an AWS CWI Certified Welding Inspector (#05110391), API 510 Pressure Vessel Certified Inspector (#27442), API 653 Above Ground Storage Tank Certified Inspector (#26681), API 570 Piping Certified Inspector (#27026), API 571 Corrosion and Material Certified Inspector (#30167), API 580 Risk-Based

Structural/piper with pdms & cadworx training

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out