Resume - Working experience of Water-Based Fire Suppresion Systems, Sprinkler Systems, Fo...

Misco Jobs

Resume #73206

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To utilize my extensive engineering skills in a professional business environment that will afford the opportunity for continued personal development and growth.

EXPERIENCE:
JULY 2007 TO PRESENT
COMPANY: Chicago Bridge & Iron N.V.
COUNTRY: United Arab Emirates
DESIGNATION: Loss Prevention Engineer
PROJECTS & PROPOSALS:
*Detailed Engineering of Grain LNG Terminal Phase III. The main components of the project included a new full containment LNG storage tank and a new jetty with unloading facilities for LNG carriers.
*Dolphin Energy's Low Sulphur Condensate Storage and Export Facilities (Proposal).
*Mashreq Tank Farm & Marine Terminal in Egypt (Proposal).

SCOPE OF JOB INVOLVED FOLLOWING RESPONSIBILITIES:
*Preparation of "Fire water System Hydraulic Calculation Report" for LNG Terminal using PIPENET's Spray/Sprinkler Module.
*Preparation of "Data sheet of Drain Pumps" for LNG Terminal.
*Man-hour Estimation for "Dolphin Energy's Low Sulphur Condensate Storage and Export Facilities" & "Mashreq Tank Farm & Marine Terminal".
*Development of Hazardous Area Schedule following guidelines of IP 15, API RP 505 & NFPA 497.
*Development of Active Fire Protection Philosophy for Marine Oil Terminal as per Marine Oil Terminal Engineering and Maintenance Standards (MOTEMS).
*Foam Calculations for Floating Roof & Fixed Roof Tanks as per NFPA 11.
*Calculation of Fire water Demand to determine Fire water Pump Capacity.

MARCH 2007 TO JUNE 2007
COMPANY: Petrofac International
COUNTRY: United Arab Emirates
DESIGNATION: Safety Engineer
PROJECT:
*Detailed Engineering of Harweel Gas Processing Plant in Oman.

SCOPE OF JOB INVOLVED FOLLOWING RESPONSIBILITIES:
*Development of Hazardous Area Schedule and Hazardous Area Layout Drawings.
*Development of Safety Equipment & Safety Signs Layout.
*Attended HAZOP to represent the Safety Department.
*Verification of Performance Standards for Safety Critical Systems like F&G, ESD & Personal Protective Equipment.

SEPT 2006 TO FEB 2007
COMPANY: Sumitomo Chemical Engineering, Co. Ltd
COUNTRY: Japan
DESIGNATION: Process/Safety Engineer
PROJECT:
Detailed Engineering of Petro Rabigh's Polypropylene Plant in Saudi Arabia. Petro Rabigh is Joint Venture of Saudi Aramco & Sumitomo Chemical Company Limited. Sumitomo Chemical is one of the world's renowned licensor for polyolefin production technology.

SCOPE OF JOB INVOLVED FOLLOWING RESPONSIBILITIES:
*Development of P&IDs and Line Designation Table.
*Restriction Orifice Sizing.
*Verifying the requirement of Sprinkler & Standpipe Systems for various Industrial & Storage Occupancies as per International Building Code (IBC 2003) and NFPA 5000.
*Responsible for designing the ESFR Sprinkler System for Product Warehouse (storing plastics like Polypropylene & Polyethylene Pellets) as per NFPA 13.
*Responsible for designing the Standpipe System for Industrial & Storage Occupancies as per NFPA 1 (Uniform Fire Code) & NFPA 14.
*Providing help to other disciplines to design the hanging and bracing systems for Fire water Sprinkler Piping as per NFPA 13.
*Verifying the requirement for Seismic Design of Sprinkler Systems as per IBC 2003 and ASCE 7.
*Hydraulic Calculation of Fixed Fire water Spray System as per NFPA 15.
*Hydraulic Calculation of Fire water Mains.
*Finalization of Fire Fighting Summary of the Plant.

DEC 2005 TO AUG 2006
COMPANY: JGC-Descon Pvt. Ltd, Lahore
COUNTRY: Pakistan
DESIGNATION: Process/Safety Engineer
PROJECTS & PROPOSALS:
*Revamp Project of Bosicor Refinery in Pakistan (Detailed Engineering).
*Detailed Engineering of JCP Petrochemical Complex in Jubail.
*Detailed Engineering of Kashima Refinery in Japan.
*SAFRA Refinery in Saudi Arabia (Proposal).

SCOPE OF JOB INVOLVED FOLLOWING RESPONSIBILITIES:
*Equivalent Length Calculation from Piping Isometrics.
*Hydraulic calculations for Line Sizing.
*P&ID development and checking of Line Designation Table.
*Thermal Design of Heat Exchangers using HTRI Software.
*Thermal Rating of Heat Exchangers using HTRI Software.
*Man-hour Estimation for "SAFRA Refinery" in Saudi Arabia.

FEB 2004 TO DEC 2005
COMPANY: JGC Corporation ( Assignment)
COUNTRY: Japan
DESIGNATION: Safety Engineer
PROJECT:
Detailed Engineering of Dolphin Gas Processing Plant in Qatar. The Dolphin Gas Processing Plant in Qatar is running now and supplying natural gas to UAE.

SCOPE OF JOB INVOLVED FOLLOWING RESPONSIBILITIES:
*Carried out detailed study to identify the equipment handling Flammable & Toxic materials using NFPA standards and decided appropriate Fire & Gas Detection around crucial equipment.
*Responsible for the design and development of Fire & Gas Detection Plot Plan based Layouts.
*Responsible for the preparation of Fire & Gas Cause and Effect Diagrams for main plant and condensate storage area.
*Responsible to decide the location of Manual Call Points, Visual & Audible Alarms for main plant & condensate storage area.
*Attended HAZOP of Active Fire Protection Systems.
*Conducted Training of Dolphin's Fresh Engineers regarding Fire & Gas Detection Systems, *Active Fire Protection Systems & Passive Fire Protection Systems.
*Responsible for the Development of PFDs and P&IDs for Fire water Ring Main, Fire water *Storage & Pumps and Fire water deluge systems.
*Responsible for the Development of PFDs and P&IDs for Foam Ring Main, Foam Concentrate *Storage & Pumps, Foam deluge Systems & Bund Extinguishing Systems.
*Responsible for the Development of Fire Fighting Equipment Layout.
*Responsible for the preparation of Operation Philosophy for Fire water Pumps and Foam Pumps.
*Responsible for the development of plot plan based layout for Miscellaneous Safety *Equipment (Breathing Apparatus, Eye Washers, Fire Blankets, Electrical Safety Kits, First Aid Kits etc.).
*Mobile Fire Fighting Equipment (Dry Chemical Extinguishers, Carbon Dioxide Extinguishers etc.) as per NFPA 10.
*Assisted other disciplines to input the F & G detectors and Manual Call Points into 3-D Model.
*Visited JGC Branch Office in Indonesia (Jakarta) to assist downstream engineering work.
*Assisted in updating Safety Concept.
*Checked Vendor documents dealing with Lifesaving & Fire Fighting Equipments.

SEP 2003 TO JAN 2004
COMPANY: JGC-Descon Pvt. Ltd, Lahore
COUNTRY: Pakistan
DESIGNATION: Process Engineer
PROJECTS:
*Heat Exchangers of BAPCO LSDP Plant in Bahrain (Detailed Engineering).
*Rehmat Gas Processing Facility Development Project in Pakistan (Detailed Engineering).

SCOPE OF JOB INVOLVED FOLLOWING RESPONSIBILITIES:
*Thermal rating of BAPCO Project's Shell & Tube exchangers.
*Hydraulic calculations for Line Sizing and Control Valve Sizing.
*Development of Simulation Model and carrying out Heat and Material Balances.
*P&ID development and preparation of Line Designation Table.

EDUCATION:

1999 TO 2002
INSTITUTION: University of Engineering & Technology, Lahore
COUNTRY: Pakistan
LEVEL OF EDUCATION: BSc. in Chemical Engineering.

1996 To 1998
INSTITUTION: University of Cambridge & Syndicate
LEVEL OF EDUCATION: Higher Senior Cambridge (A-Level)

1996
INSTITUTION: University of Cambridge & Syndicate
LEVEL OF EDUCATION: Senior Cambridge (O-Level)

COMPUTER SKILLS:

*Operating System: DOS, Windows 9.x, Windows 2000, Windows XP, Windows Vista
*Computer Languages: Java, FORTRAN 90.
*Other Software/Skills: Microsoft Office 97/2000/XP, IBM's Lotus Notes 7.
*Engineering Softwares:
*HTRI (Heat Exchanger Design Software)
*PIPENET Vision's Spray/Sprinkler Module Version 1.21
*Intergraph's Smart Plant Review ( 3-D Model Review Software)
*VANTAGE Plant Design Review Version 6.2.1.0
*AutoCAD 2007

Training Courses And Seminars Attended:
*A Course on "Development of Process Plant Operation Skills" by Centre of Professional Excellence in Pakistan.
*Four weeks internship at Dawood Hercules, Fertilizer Plant in Pakistan.
*In-house Process Engineering Software Training at JGC-DESCON, Pakistan.
*In-house Fire Protection Training Sessions at JGC, Japan.
*AutoCAD Training at JGC, Japan.
*Smart Plant Review Training at JGC, Japan.
*Fire Protection Workshop by Angus Fire at JGC, Japan.
*One Day "PIPENET's Spray/Sprinkler Module" Training by Image Grafix Software Company in Dubai.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 6411)

Go to Search Parameters...

Brief Description

Petroleum Engineering Technologist. Drilling, Production, Reservoir.

Automation Engineer

M.Tech in Chemical Engineering. Presently working with Bechtel as an Process Engineer.

piping design engg

Working as Process Engineer. I have done M.Tech in Chemical Engineering & having 2 years of experience in the field of oil & gas processing.

Working experience of Water-Based Fire Suppresion Systems, Sprinkler Systems, Foam Systems, Passive Fire Protection Systems, Safety & Fire Fighting Equipment, Fire & Gas Systems,Standpipe Systems, Hazardous Area Classification, HAZOP, Man-hour estimation for proposals etc.

Process engineer

Automation

Materials Control, Handling, Storage, Warehousing

I have 15 years experience in petrochemicals plants

Almost 10 years experience in detail engineering and construction for oil & gas, and petrochemical industry for Onshore LNG Plant, Onshore Gas Plant, Onshore Oil Gathering Station, Welhead Platforms, and Onshore/Offshore Pipeline, for clients such as: BP, PTT E & P (Thailand), PT Badak NGL, Caltex,

Metallurgy, Heat treatment, Structures & Properties of Materials, Phase Transformation & Kinetics, Corrosion and its protection.

Instrumentation & Control Engineer with Master Degree and U.A.E. Experience

Many years of experience in various services in the oilfield. A hard working, career/goal oriented individual.

I am fresh candidate. Just completed masters degree in Applied Geophysics. Really keen to join industry and have potential to work of any degree.

I have en extensive experience in detail design and stress analysis of piping system for LNG Plant, Petrochemical Plant, Oil Refinery Plant, and Geothermal Plant for both Onshore and Offshore Project for more than 13 years as Senior Piping Engineer/Senior Pipe Stress Engineer.

QUALIFICATIONS: BE(FIRE ENGINEERING)&POST DIPLOMA IN INDUSTRIAL SAFETY SSC&HSC,BSC(PHYSICS)&COMPUTERCOURSESALLINFIRSTCLASS. EXPERIANCE:13 years ASFIRE ENGINEER IN IPCL(petrochemical corporation india)&presently as dy.fire service manager.AGE:43 years. NATIONALITY: INDIAN.GULF EXPERIANCE:NIL.

My area of expertise is in Clastic Diagenesis. I have a background in sedimentology, sedimentary petrology, and geochemistry. My graduate work was expanded to include courses in environmental aqueous geochemistry and hydrology.

I'd got a bachelor's degree in the major of applied chemistry with about 13 years experience

10+ years experience including supervisory experience in the process/ manufacturing industry. • Excellent interpersonal skills • Quick to learn and willing to take on new challenges.

my main work to covering all business regarding with the naturally occurring radioactive materials NORM ( radiation protection supervisor)-supervision, remediation, planning,.........

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

Seeking a position as an Instrumentation and Control/Electronics engineer in design, development, project and maintenance

A highly qualified & skilled Environmental Engineer, working in a major Petrochemicals Industry for 13+ years. Perform/Responsible for ALL aspects of Environmental Management System related to big-size Petrochemicals Complex. In addition, also exposed to various activities of ‘HSEF dept’.

I am geologist specialising in Rock Mechanics. Well versed with RocK Mass classification and support design. Numerical modelling on Flac 3d with very good results.

Career Summary: 17 years Electrical/Instrument experience including full apprenticeship and technical trade certificate in Electrical Engineering. Strong international background specialising in Construction/Commissioning/Supervision of projects within the Power Generation, Petrochemical, Mining etc

I have been associated with M/s. Audco India Limited, Chennai since 2004 and attached my resume to your kind perusal. I look forward your communication at the earliest and please feel free to contact me anytime for further details. Yours Truly Gopinath.D

Currently working as Senior Inspection Engineer on laarge Petrochems plant in Central Scotland, carrying out inspections against written schemes of examinations on all process plant equipment. responsible for all inspection day today activities in my area.

PIPING STRESS ENGINEER WORKED WITH LINDE AG MUNICH AND PRESENTLY WITH WORLEY PARSONS AT SOUTH KOREA

Skills in mechanical equipment maitenance and production operation,B.Eng in mechanical engineering,Diploma in mechanical engineering technology, C&G london diploma in mechanical maintenance & production operation,SITP( Shell Intensive Training Programme)Mechanical workshop comptence certificate

welding inspector + engineering degree+ aws-cwi

H2S Engineer, Administrative work, Certifications

INSTRUMENT & CONTROL ENGINEER

Senior Geophysicist, Petroleum Negotiator

OBJECTIVE: A position as Mechanical Engineer (Basic/Principle Design, Estimation, Tendering & Procurement)

Fifteen (15) years of experience in Instrumentation works.

A committed and dependable team player with extensive offshore operations/commissioning experience and onshore construction / commissioning experience

Expertise in sizing, correct selection, design base document, specifications/data sheets, material requisition for inquiry/purchase, technical & commercial evaluation & recommendation, design review & approval and witnessing tests of Rotating Equipment (Gas / Steam Turbines, Positive Displacement

Reservoir simulation, welltest (onsite support & interpretation).

Mech. Engineer & MBA with over eight (08) yrs of exp in Project Marketing. Engaged in BD activity for Process Package/ Eqpt required in Offshore/Onshore projects of Oil & Gas Sector with full exposure to Separation Eqpt, Process Heaters, Electrostatic Emulsion Treaters, Glycol Dehydrator, FG Skid.

I am a qualified mechanical engineer, graduated in 1993. Since than have been working in various projects of Power Plants. Presently, I am working as deputy manager (second to general manager). We are running furnace oil and gas operated power plants.

Third part analysis for field operation, Field Operation responsible, Risk analysis, Supplier responsible, Contact with the client responsible, Well Design Casing Design.

I have passed I T I and diploma electronics & Comm. Engg.with the more than 10 years experience of relevant field

Piping Layout design.

I have total experience almost 4 years in piping stress analysis. I have work in oil & gas project as well as power plants. I can work on piping stress software like caesar II, autopipe and triflex. I have knowledge of European code 13480 and asme 31.1 & 31.3.

Work on DCS, PLC, Fire and Gas, process control instrumentation installation, commissoning and maintenance, Currently working as Senior Instrument Technician in Ras Laffan Industrial City, Qatar.

This letter is to express my interest in the Proposal / Estimation Engineer position. Based on my skills in boiler field for past four years, I am confident that I would be a great addition to your team.

I have 4 years experience in PLC Automation .(3 years in Schneider and 1 year in GEFanuc PLC). PLC logic development , SCADA development ,Field activties and commissioniing of PLC systems.

4 years experiences in Oil & Gas engineering. Workings in safety engineering design include loss prevention (e.g. fire fighting design, firewater hy-draulic calculation, PFP, etc), risk assessment (e.g. HAZOPS and HAZID, FMEA, SIL, consequence analysis)

As chemist in the quality control Lab, The chemicals of toothpaste and shaving cream [(NaOH, KOH, Free fatty acid) concentration, Ph, viscosity and density] in lab and quality control on all the production stages in factory

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out