Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #73214
next resume »»
CONTACT INFORMATION:
View contact information...
RESUME
OBJECTIVE
To hope my skills rise above the corporate ladder in the field of development. Always about the target and try to over come the difficulties to achieve the objective and looking for a fast track challenging career in a growing organization.
EXPERIENCE
Working as a Environmental Specialist in Royal Commission Contract. Kingdom of Saudi Arabia
7.5 years Chemical and analytical experience in Government of Kerala OSHA,PFA,NIOPH,US-EPA and ASTM standards. 7.6 years additional experience as an Environment Health and Safety (EHS) Committee Executive Member in Ministry of Health Services, Government of Kerala. India
1.5 years part time Research experience in Organic Research Division, Department of Chemistry, University of Calicut. India
JOBS PROFILE
Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.
Knowledge of international standards, regulations, legislation and codes of practice,
Experience in standardization and calibrations of analytical instruments.
Hands on experience with High Performance Liquid Chromatography (HPLC, Waters), Gas Chromatography with MS (GC/MS), Microwave Digester (MARS,USA), Atomic Absorption Spectrometer (AAS).
Analytical based Software skills
* Familiar with Chemdraw software
* Experience with Empower software
* GBC Aventa software
* GC Solutions
COMPETENCIES
* Fast learner. Adapt well to changes and pressures in workplace.
* Work effectively with diverse groups of people.
* Friendly with an upbeat attitude.
* Ambitious and committed to excellence.
* Committed to deadlines and schedules.
* Able to relocate anywhere.
* Good presentation skills.
PROFESSIONAL QUALIFICATION
Degree Year University Major subjects studied
M.Phil Chemistry 2007 University of CALICUT Theoretical Chemistry, Spectroscopy
Organic Chemistry (Elective)
MS Chemical science
2000
University of KERALA, India Analytical Chemistry, Organic Chemistry, Inorganic Chemistry, Physical Chemistry
B.S Chemical science 1993
University of KERALA, India Organic Chemistry, Inorganic Chemistry, Physical Chemistry.
Physics, Mathematics
RESEARCH PUBLICATION:
* Composition and antimicrobial activities of Mangifera indica. (Paper presented in National seminar on Green Chemistry and Natural products, University of Delhi, India.)
* Composition and Biological activity of the essential oil of Litsea laevigata nees (Lauracea). (Paper accepted in Natural products communications)
ACADEMIC MEMBERSHIPS:
* Member in American Chemical Society.
* Member in Indian Society of Analytical Scientists.
* Member in Science Advisory Board.
* Member in Council of Chemists. India.
* Applied for Fellow in Institute of Chemists. India.
* Member in Association of Food Scientists and Technologists. India.
* Member in All India food Analysts Association.
* Member in National Service Scheme.
ADDITIONAL QUALIFICATIONS
B.Ed
1996
University of KERALA, India Physical science
Teaching methodology
Education technology
B.L.I.Sc 2000 University of CALICUT Library And Information Sciences
DCA (Diploma in computer applications)
1999 Phase Computers HYDRABAD Microsoft Front Page, Network installation & Administration, Database Administration, Windows9x, WindowsNT, Windows2000, WindowsXP & Linux.
PGDCAQM
(Post Graduate Diploma in Chemical Analysis and Quality Management) Course incomplete University of Hydrabad Basic Electronics, Quality Management, Instrumentation, Analytical Chemistry, Spectroscopy. Environmental Chemistry
SHORT EVENING COURSE
* Kerala Government Technical Education English Typewriting
* Certificate Course in French (Doing)
PROJECTS
Project 1: Composition and antimicrobial activities of Mangifera indica.
Supervising guide to
Project 2: Quality analysis of fresh water resources in Ullikal Panchayat. India
Client: M.Sc Project, St.Mary`s Post Graduate College, Waynad
Project 3: Study of Physical and Chemical properties of carbonated water from various small scale industrial units in Calicut City
Client: M.Sc Project, St.Mary`s Post Graduate College, Waynad
Participated important Seminar/Workshop/Conference/ Training etc
Training
* Food Administration
* Water Quality Monitoring and Management
Seminars
* New vistas in Chemistry
* New Trends in Chemistry
* Modern trends in Chemistry
* Library Management
* Adult &Continuing Education
Workshops
* Bioinorganic Chemistry
* Bioinorganic Chemistry
* Chemical Thermodynamics
* NMR Spectroscopy
Symposium
* Polymer sciences
Conference
* Material sciences and analytical chemistry
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 5851 to 5900 of 6411)
Go to Search Parameters...
Brief Description
Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP
Free!
Lead Electrial Planner, Safety & Environmental Manager, QA Manager
Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.
Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.
Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.
Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas
M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators
Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team
Mechanical Engineer with proficiency in IDEAS, Nastran
A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr
Mechanical engineering finite element analysis composites ansys Master's
3 Years of experience in Substation Automation field. Worked with Areva, ABB, Siemens & GE systems.
Time served pipefitter with 12 years experience.
PLANNER SMELTER
Very good exp on Document MAnagement, Administration and Trouble shooting.
Automation, Control, Electrical, Instrument, Field service engineer
Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor
I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.
AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler
PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0
Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.
Operations, Technical, Leadership, Surface, Underground, & International Experience
analyst
Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.
Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.
P&PCM, MBA, B.Arch
I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry
7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.
Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training
Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control
I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT
I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.
IIT Graduate - SAP Implementation Exp - 2 yrs
Piping, PDS, PDMS, PSDS Designer Over 9 years experience in the field of Mechanical, Piping Engineering Design / Drafting and Construction. A variety of successful projects for power, industrial, chemical, petrochemical, oil & gas, refinery, pharmaceutical and cement plants.
Operations Supervisor
AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.
Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management
As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.
Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS
A dynamic professional with over 10 year of experience in Project Planning, Cost Control, Estimation, Quantity Surveying, Co-ordination and execution of MEI&P Projects. Proficient in Primavera Project Planner V3.1 & 6.0, Office XP/2000 and In-house soft wares for Client / Sub-contractor Billing
Electrical Engineer
Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones
Passed Bachelor of Engineering in 2002 and then completed my MBA. I am working as a senior design engineer in Instrumentation & automation field of Larsen & Toubro Limited organisation.
Management Graduate with Bachelors in mining engineering, excellent knowledge of SAP, Internet, Microsoft office etc. Sales in Oil and Gas, Energy sector, Training Expert. Good experience of handling people.
Bachelor degree of Business Administration graduate and very well know MS - Office, other computer languages also.
A hands on Mechanical Supervisor/ Team Leader, with managerial and technical experience, specialising in Rotating Equipment. A total of 20 years spent working for Dresser Rand in the energy conversion business. Additionally, considerable experience in training all levels of the workforce and mgmt.
A fully qualified GIS specialist with experience in the delivery of major asset management projects. Adaptable to business requirements, with management experience. Well versed in the use of ESRI ArcGIS 9.1, WINGS 2.4.10, AutoCAD 2008, Corel Paint Shop Pro XI. IT literate.
E-Business,E-Tendering,International Business Development
Desired employment / Occupational field Financial & Economic / Project Analyst
FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.
First
Prev
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
[ 118 ]
119
120
121
122
123
124
125
126
127
128
129
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com