Resume - I have vast experience in site works and have a good knowledge of soil and rock ...

Misco Jobs

Resume #73429

CONTACT INFORMATION:
View contact information...

Year of birth: 1967

Nationality: Turk

Occupation: Geological (Hydrogeological) Engineer

Second Language: English (good and fluent)

Education:

1983 – 1989 Hacettepe University, Faculty of Engineering, Geological (Hydrogeological) Engineering

1986 – 1987 English Language Course in International Institute, Detroit / Michigan / USA

1980 – 1983 High Scholl

Special fields of competence:
Soil and rock anchors, drilling and grouting works, cast in place concrete piles, vibropiles, drilling drainage holes and weeps holes, thin-wall works,
Slurry-trench, dewatering, sheet piles, deep excavation, pipeline construction.

Professional history:

2007-up to date GATE – Construction Company
Client: AGIP
Atyrau / KAZAKHSTAN
Site Engineer of Dewatering and Deep Excavation,
Dewatering
Sheet pile works, 2.500 m2
Manhole, catch basin installation
Infrastructure works
Underground works

QA/QC Department
SDRS Documentation

2007 INTER Foundation Company
Site manager of foundation works
Client: PETRONAS
Turkmenbashi / TURKMENISTAN
Cast in-situ piles, 6.000 mt.
Geotechnical tests,
Deep excavation

2005 IZMIRGAS - Intercity Natural Gas Company
Natural Gas Line Route & Re-Route Engineer
Izmir / TURKEY
Site Engineer for pipeline route

2003 BOTAS – BTC PROJECT
Georgia – Azerbaijan – Turkey Crude Oil Pipeline
Geotechnical Engineer
Client: BP
Adana - Sivas / TURKEY
Crude Oil Pipeline, Dia. 34" & 42", 344 km.
Geotechnical investigations for pipeline route
As-built reports
Scope change works

2002 TARTICILAR SHEETPILE Construction Co.
Natural Gas Station – Onshore Section
Blue Stream Project
Client: SAIPEM
Samsun / TURKEY
Site Manager of Excavation, Backfilling, Pile Works
Sheet pile, 10.000 m2

2000 TEMKA Foundation and Drilling Co.
Site Manager of All Foundation Works
Istanbul, Izmir, Bergama, Ayvalik, Canakkale
Cast in-situ Piles, 24.000 mt.

1990 KUTLUTAS Foundation and Drilling Co.
Site Engineer than Site Manager of All Foundation Works
Istanbul, Izmir, Dalaman, Golcuk, Gaziantep, Urfa
Dywidag Rock Anchors, 67.000 mt.
Soil anchors, 12.500 mt.
Cast in-situ Piles, Ø 120 cm., 50.800 mt.
Cast in-situ Piles, Ø 65 cm., 40.000 mt.
Swellex bolts hole drilling, 14.800 mt.
Drainage hole drilling, 12.200 mt.
Weep holes drillings, 16.200 mt.
Vibropiles, 24.500 mt.
Thin-wall works, 22.500 mt.
Slurry Trench Works, 2.400 m2

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 6520)

Go to Search Parameters...

Brief Description

Having an Overall inspection experience of 9 years in the Paint Industry and Construction Companies, out of which 8 years in India with Multinational companies and 1 year Overseas experience in handling different projects like Petrochemical, Refineries, Oil & Gas, Chemical Plants, Wind Energy Forms,

For the past 6 Years have experience in Gulf like SAUDI and UAE. Had been worked 5years in "AL NAJIM SAUDI INTERNATIONAL COMPANY "(NASICO) at Dammam, K.S.A.

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Facility Engineer for oil and gas

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

A professional (M.Sc.degree) well qualified Instrumentation / Process Control Engineer, with 24 years in-depth design, management, consulting, maintenance, and teaching experience; PEO and APEGGA license.

Instrrumentation design, detailed engineering, procurement, construction, commissioning

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

Skilled in using Hysys, Microsoft Office , VBA, AutoCAD, RSI Indiss, Somcon X;2. Ordinary in using ASP, HTML , C/C++, Visio, VB, CS3000, TDC3000, PKS, petrochemical process operation .

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

To work for a company in the petroleum/oil field that allows professional and personal growth.

A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.

Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Professional and educational background include detailed working knowledge in the following areas: Health, Safety & Environment (professional educational background: NEBOSH National General Certificate graduated and International NEBOSH Diploma Programme started at the end of 2007)

Corporate QA Engineer

Process Engineer working with DSM(Work Exp. 5 years)

PRODUCTION CHEMISTAND FLUID BEHAVIOR SPECIALIST WITH VAST EXPERIENCE IN FLOW ASSURANCE STUDIES

my skills are coating inspector,piping inspector, welding inspector n have various ndt certificates

Diagnostic by analysis vibration, balancing, alignment, Control by infrared thermography, Intallation of on-line systems

VARIOUS FIELDS OF INSTRUMENTATION AND PROCESS AUTOMATION, COMMISSONING, PROJECTS

Cementing and stimulation engineer with previous experience as field engineer, sales engineer, and in-house coordinator.

Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis

Organic chemist

A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering

BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.

Free! Strong skills, working knowledge, and extensive experience in Petrography, Structural Geology, Geologic Mapping, Mineral Exploration, and Remote Sensing.

I have vast experience in site works and have a good knowledge of soil and rock anchors, drilling and grouting works, cast in place concrete piles, vibropiles, drilling drainage holes and weep holes, thin-wall works, slurry-trench, dewatering, sheet piles, deep excavation, pipeline construction.

Lead Engineer, Shift Engineer, Preventive & Predictive Mechanical Maintenance Engineer

Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.

Pressure vessels, Heatexchangers and tanks designre

Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems

Manager, design systems, HSE mechanical service

Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction

EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987

I am presently working as a procurement coordinator since may 2002. projects include OLG PROJECT in oman and Pearl GTL Project in qatar. Prior to that, i was a quantity surveyor from august 1996 to april 2002

B.Sc. Degree, WellView, DIMS, Drilling and Drilling Fluids Programming, strong computer skills in VB and Office

I have 12 years experience on design and manufacturing industries. Moreover I completed 4 design courses (Stress Analysis, Finite Element Analysis, Structural design, Computer Aided Mechanical Design) and 5 manufacturing (Manufacturing of Composites, Mechanical forming and shaping of metals)

Included in this resume are details of my experience on gas pipelines. I have welding inspection qualifications and have experience of NDT techniques which are used in the pipeline industry. I also have experience of construction on gas pipelines while working for Transco.

* Over 4 years of reservoir engineering experience in USA and Canada * 8 years of petroleum engineering/well completion experience in China * Expertise in using BOAST 98, SGM, ECLIPSE and IMEX

Results oriented, highly focused professional offering over 14 years of experience in oil & gas research with strong working knowledge of lease terms and provisions. Proven team leader committed to reaching company objectives

Am a chemical Engineering Graduate with 6 months work experience at Kaduna Refining & Petrochemical Company. A Safety expert & a plant operator. posses good team spirit & can work under pressure.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out