Resume - Nobody has climbed up through the steps of success with his hands in his pockets...

Misco Jobs

Resume #73452

CONTACT INFORMATION:
View contact information...

Personal
Information
 Marital status: Single
 Nationality: Turkish
 Date of birth: 14-01-1978
 Place of Birth: Ankara/Turkey

Employment [ 2007- ] MERTY Energy Ankara, TURKEY
Engineer
Geophysical investigation, Project management, Seismic Process
[ 2000-2007 ] YILMAZER Education and Engineering Ankara, TURKEY
Engineer
Geotechnical design, Geophysical investigation, Project management
Education
[ 1992-1995 ] Dikmen vocational school Ankara,TURKEY
Electronics Technician 4,15/5
[ 1996-2000 ] Ankara University Ankara,TURKEY
Geophysical Engineering 72,5/100
[ 2006- 2007 ] Yuzuncuyil University Van,TURKEY
M.Sc Geological Engineering 95/100
Languages Turkish and English
Smoking I don't smoke
Association
Memberships
Members of Geophysics Engineering Association Executive committee
Member of Society of Exploration Geophysicists (SEG)
Members of EuropeanWind Energy Technology Platform
Military service Done - August 2001 – March 2002 Balikesir,TURKEY
Interests Play Football, Tennis, Running, Gardening, Photography, Sculpture,
Trekking, Computers, Computer systems, Electronic Hardware,
Electronic Equipment, R&D projects
Nobody has climbed up through the steps of success with his hands in his pockets.
Computer Skill
Courses English Course-Conversation (on going) 2008
Spectral Analysis 2008
Seismic Stratigraphy 2008
Landmark Learning-Promax 2D 2008
Drilling Rig, Drilling and Well Comp. Opera. 2007
Visual Basic.NET Programming course 2006
English Course-Toefl course 2002-2004
Project Management course 2004
Certificate GIS (Geographic Information System) 2008
Drilling Rig, Drilling and Well Comp. Opera. 2008
Seismic interpretation 2007
Seismic Data Acquisition and Process 2007
Geodesy and GPS 2006
Geotechnical Course 2005
Seismic Prospection 2004
Georadar 2004
Rezistivity 2004
Microtromor 2004
Project Management Professional 2004
PROFESSIONAL
EXPERIENCE
March 2007 - Present
Place: Ankara – Turkey
Employer: Merty Energy
Position: Field seismic data acquisition activity as a Seismologist,
Field QC Processor, Processor
1. 2D Seismic Process Project in North Iraq
2. 2D Seismic Data Acquisition Project In South Karakilise -
Diyarbakir /Turkey
3. 2D Seismic Data Acquisition Project In Geçkinli - Edirne
/Turkey
4. 2D Seismic Data Acquisition Project In Adiyaman /Turkey
5. 2D Seismic Data Acquisition Project In Edirne /Turkey
Sept. 2000-2007
Place: Ankara – Turkey
Employer: Yilmazer Education and Engineering
Position: Senior Geotechnical Engineer, Project Manager
Work: Various Projects are involved
"Company is serving as designer and consultant in Geotechnical works especially in the field of Highway, Pipeline, Organized Industrial District and Housing Estate works, including; route location study, geo environmental impact analysis, geological–geophysical–geotechnical investigations, tunnel design and remedial works, earthwork design and slope Stabilization, special design to alleviate site specific problems, and consultation in relevant civil and geotechnical works. "Computer aided geotechnical design works.
 Windows XP, Vista
 Office 2003,2007
 Macromedia Flash 8.0,
 PhotoShop 7.0,
 ACDSee v6.0,
 ScanSoft Omni Page
 VideoFramer,
 Internet Explorer,
 CuteFTP,PhotoShop 7.0
 Red Hat Linux
 Promax
 AutoCAD 2008,
 Corel 14,
 Microstation V8,
 Inroads,
 Surfer 8.0
 İpes6,
 Rockscience Dips v.5
 Rockscience Slide 4.0
 Rocklab
 Visual basic.net
 Fortran
6. Muradiye-Çaldıran Highway Project (2006, -) /Turkey
7. Kora - Shaqlawa - Qandeel Highway and T1 - T2 Tunnel
Project (2006) /Iraq
8. Silvan-Malabadi Highway Project (2005, 2006) /Turkey
9. Malatya Highway Project (2005, 2006 ) /Turkey
10. Akşehir-Yunak Highway Project (2004, 2005 ) /Turkey
11. 2. Manisa-Akhisar Highway Project (2004) /Turkey
12. Bitlis Baykan Highway project and 8 Agustos Tunnel project-
(2003, 2004 ) /Turkey
13. Formula-1Racing pist connection road Project (2004) /Turkey
14. Tortum-Ispir Highway Project (2002-2004 ) /Turkey
15. Formula-1 Racing pist Project (2003) /Turkey
16. Bolu-Duzce-Golyaka Highway Project (2000- 2002) /Turkey
References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6742)

Go to Search Parameters...

Brief Description

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter B&R, GE

Senior buyer with more than 20 years exposure to both the on- and offshore oil and gas / petrochem sectors and has executed materials / procurement activities for a number of world-wide projects during various project phases.

Underbalanced Drilling, UB Drilling, Air Drilling, OHSE Managment, Operations Manager Drilling Consultant, Toolpusher

Drilling Fluids Cementing Logistics Marketing Management

Cost Engineer

I am a qualified Mechanical Fitter and Turner with twenty years extensive experience. I am booked to complete an Offshore Survival & Fire Fighting Course from 16 Aug until 20 Aug 2004.

I am an electrical engineer, I have 14 years experience in industrial projects mainly in steel industry and oil & gas industries, I have gained valuable experience in design, procurement and construction of electrical systems, I am familiar with MS office and electrical analysis software Etap.

I am an electrical engineer, I have 14 years experience in industrial projects, I am looking for a job in United Arab Emirates.

I'm a Senior CSWIP 3.2 and Radiographic Interpreter 3.4 holder. Having more than Twenty years of experienced in Oil & Gas construction and Inspection work, both Structural or Piping in Onshore and Offshore. Familiarized with various Welding Processes and relevant Code & Standard.

20 years experience in the industry and PDMS user since 1997. Extensive experience in PDMS 3D Design and 2D Draft producing engineering and fabrication drawings for a wide range of projects in the following countries: France, USA, Norway, Holland and UK. Experience in AutoCAD and Microstation.

Played as a Coordinator / senior to executed various turnkey EPC Projects incl HVAC system Rich Experience in the Project Management and coordinate to finalise Basic Design, Basic Engineering, Detailed Engineering with Process Engg.

Date of Birth 19 Octobre 1951 Nationality British/Turkish (double nationality) Current Position Beicip Franlab Associate Reservoir Management Consultant

Twenty years experience in global recruitment of oil & gas people: sound knowledge of engineering skills required for design, fabrication, construction, commissioning of FPSOs, LNG trains, offshore platforms, petrochemical plants and refineries.

Maintenance Supervisor/ Superintendent

maintenance electrician moving to Alberta Canada requiring career opportunities

Senior Piping Designer

I am interested in domestic or international employment in the oil and gas industry. Please see resume for an overview of my qualifications.

A professionally qualified Engineer and Maintenance Specialist, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical, training and management disciplines as well as practical, 'hands-on' involvement.

29 years experience in offshore pipeline project engineering, procurement, offshore construction & commissioning in North Sea & SE Asia. Includes pipelines, risers, tie-in spools, manifolds, umbilical, shore approaches, testing, de-watering, air & vacuum drying & nitrogen purging & gassing up.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

Qualified Mechanical & Marine Engineer with 20 years oil field maintenance experience. 6 years as Mechanical Supervisor on Production Platform. Production operations experience, high pressure/high temperature wells. Overseas experience. Qualified crane operator and many other offshore courses.

Mech/weld inspector, I have held c.s.w.i.p. cert for 22 years ,5 year time served boilermaker apprenticeship, presently working on the Qatif gas oil separation plant Saudi Arabia as senior mech/weld inspector

PROFICIENCIES: Practical knowledge of Preventive Maintenance, Vibration Analysis, Oil Analysis, Non-Destructive Testing, and Laser Alignment. Knowledge of rotating equipment, bearings, lubrication. Knowledge of MS Office and various CMMS. Good verbal, writing and interpersonal skills.

Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.

Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.

20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.

Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...

I 'm Canadian citizen, I have second class marine engineer.

25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.

Process Engineer

Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.

I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.

26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.

Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.

BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.

Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.

qa/qc engineer or inspector

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

To become a successful Planning Professional in a professionally managed

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction.

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out