Resume - graduated in mechanical engineering, Proficient in Autocad, Trained on HVAC syst...

Misco Jobs

Resume #74019

CONTACT INFORMATION:
View contact information...

Career Objective:

Looking for a challenging and demanding career in Mechanical Design and Engineering in a growth oriented organization to render new dimensions to my professional skills thereby adding value to organizational growth which would update to cutting edge technologies.

Work Experience:

* Worked as maintenance engineer in Hardboard section of The Western India Plywoods, Kannur, Kerala, India:

Work profile:

- Inspection and maintenance of crucial machineries used in hardboard manufacture like compressors, pumps, motors, grinders, press etc.

- Thorough training on the various hydraulic and pneumatic systems used in the industry.

- Practical knowledge of the various manufacturing processes of hardboard manufacture which include grinding, pulping, pressing, drying.

- Knowledge of the operation of various steam boilers used in the industry which include Sterling boiler, IAEC boiler, Thermax boiler and the flow of steam and its application for various processes.

- Training on the operation of various drives like belt drives, rope drives, chain drives.

- Knowledge on hot pressing & drying operation.

- Knowledge of plywood manufacturing processes.

* Completed study on HVAC systems of Indian Institute of Management, Calicut, Kerala, India:

Work profile:

- Underwent training on the central air conditioning system used in the Indian Institute of management, CALICUT, Kerala, INDIA.

- Knowledge on the working of central air conditioning unit.

- Knowledge of psychrometric chart.

- Heat load calculations.

- Air volume requirement calculations.

- Duct design.

- Preparation of drawings in AutoCAD.

* Worked for 4 months in Cognizant Technology Solutions, CHENNAI, INDIA as a programmer analyst trainee.

Academic Qualification:

* B.Tech (Mechanical Engineering) from College of Engineering, Trivandrum affiliated to Kerala University, Kerala, India with an aggregate of 72.6% in 2007.

* Intermediate (A. I. S. S. C. E) from CHINMAYA VIDYALAYA, Kannur, Kerala affiliated to C. B. S. E, India with an aggregate of 81.2%.

* Matriculation (SSLC) from St. Joseph's H. S. S, Tellicherry, Kerala affiliated to State Board, Kerala, India with an aggregate of 91.5%.

* AutoCAD course completed from CADD CENTRE, Kannur, Kerala.

* Refrigeration & Air conditioning course completed from SCHOLAR INSTITUTE, Thalassery, Kerala, INDIA.

Software skills:

1. Proficient in AutoCAD.
- Able to make 2D, 3D, isometric drawings.
- Able to make Hydraulic circuit drawings.
- Able to make HVAC circuit drawings.
- Able to make machine drawings.

Technical skills:

Knowledge of
- Industrial Hydraulics & Hydraulic Machines
- Refrigeration & Air conditioning systems
- CNC machines
- Manufacturing processes
- Fluid mechanics
- HVAC

Industrial visits:

- Hyderabad Dies & Moulds
- Vilas polymer ltd
- Toolmak (Precision tool makers)
- Manaksia ltd
- CITD (Central Institute of Tool design)
- Ace tyres.
HYDERABAD, INDIA

Academic Project:

* Design of CNC drilling machine
A CNC machine that drill holes on a wooden board according to the pattern given through a computer program has been designed.

Personal Details:
Sex: Male
Date of Birth: 07/12/1985
Marital Status: Single
Languages Known: English, Hindi, Malayalam and Tamil.
Visa status: Visit visa

Hobbies:

Listening to music, traveling.

References:

* Available on Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4951 to 5000 of 6445)

Go to Search Parameters...

Brief Description

„« More than 11 years of professional working experience in an Oil/Gas, Petrochemical, & Electro-Mechanical Construction Industry; experienced in development implementation, quality, supervisions and inspections.

B.S. in Mechanical Engineering, 14 years of experience from inception to completion of HVAC design and construction in commercial building (high-rise, shopping mall), pharmaceutical, laboratories, clean room, and hospitals.

b.e(industrial electronics),skills are worked on siemens/abb plc,ac & dc drives,troubleshooting ,hydraullic know how,pneumatic know howsiemens drive,lenze drive,ac & d motors and their controlling,worked over software like cmms,icam,matlab,autocad,orcad,software used in equipment/machineries.

Installation, maintenance and repair of medical equipments

NACE-USA Certified Senior Corrosion Technologist & MICorr grading from Institute of Corrosion-UK, having 19years work experience in Cathodic Protection Technology Services & Corrosion Control Services is available for employment.

A proactive and experienced individual with excellent Turnover and Acceptance Coordinator, Senior Document Control, HSE coordinator and Basic Life Support coordinator skills in various sectors like Oil & Gas sector, Petrochemical, Desalination Water & Power Plant Sector.

Operation Manager, International Pipe Inspector by DS-1, (Level II UT, RT, MT & PT) - ASNT-TC-1A

MSc Engineering / Business Development / Project Management /Energy fielsd

Control Systems Engineer (Programmer & Designer)

i have three month experience in the oil field and one year experience on the mining field as a junior geologist. my duties are core logging,sampling, underground mapping and data acquisition,and Running/Monitoring (data collection) and processing of crude oil to the surface.

Geological engineer with one year experience in RC, Rab and Auger sampling and logging coupled with knowledge in MapInfo and introduction to Surpac

graduated in mechanical engineering, Proficient in Autocad, Trained on HVAC systems of Indian Institute of management, Worked as maintanence engineer in The Western India Plywoods, India, Worked as a software engineeer in Cognizant technology solutions,

on/offshore seismic data acquisition.Field seismic QC.Seismic recording: SN 388.DESIGN 3D Layout.and NAVIPAC as navigator.Deployment/recovery of seismic devices.Trouble shooting and attend to work shop.

Project Manager / Finance Management

Instrumentation Technician/Trainer/QA/QC

Masters in Mechanical Engineering , with CAD/CAM and FEA courseowrk , Done Maintenance Engineer job in Textie indutsry , Undergarduate Internship in Desiging and Graduate Internship in Desiging and Analysis , Handled 3D softwares like CATIA , Pro-E and 2D software like Autocad

Carry out skilled maintenance work independently in the repair, overhaul, troubleshooting, alignment and modification of mechanical, rotating and stationary equipment like pumps, steam and gas turbines, compressors, fans, gearboxes, valves, PSV’s, heat exchangers, vessels, columns, boilers, filter

Extensive experience in hardware and software testing. Executed regression tests. Logged defects and participated in defect prioritization and verified fixes.

My skills are quality improvement, planning, and reporting to ensure that the service provided is what the client need. I have over two years experience working with oil and gas data. I have the ability to find data management solutions. I'm seeking a career opportunity for a growing company.

geophysicist

Senior Professional Geologist

Executive engineer & managment projcet

I am very confident with my experience and ability that I can offer to work with your company, especially in calibration, repairing and testing of the many kinds of Instrumentation such as transmitters, control valves, switches and general instrumentation.

Tendering & Estimation, Proposals Preparation, Contracts Engineer

Free! Project and Commissioning Engr/Manager I&C

Petroleum Engineer looking for Fields operations

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Specialized in designing using Pro-Engineer in Automobile industry, consumer and power transmission industries.

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Research Experience: Polymer solutions and adsorption behavior.

Mechanical Engineer

To be a part of heighly esteemed organisation where working will be a chellange to my skills.

I have just attained a Diploma in Petroleum Engineering Technology and is presently pursing my B.Eng degree in Petroleum Engineering. I have also learned and applied Project Management to a variety of projects. Also, I have 6 months of both land and offshore experience in the Oil and Gas Industry.

Looking for Instrumentation and controls job

I am a Quality Health and Safety Management Consultant with more than 16 years experience in Middle East . I am a Lead Auditor for ISO9001:2000; ISO14001:2004 and OHSAS18001:2007. Apart from this I am NEBOSH-UK Certified HSE Advisor . Has rich exerience in evaluating Management systems

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Highly Skilled Civil Engineer

Having more then Six years of experience in operating and controlling trouble shooting of high-pressure Oil and Gas plants .

Training/HR Professional, Accredited Vocational Assessor with experience in the areas of Performance Consultancy, Personnel Development, Recruitment, Competence Based (NVQ) Training Systems and Certification, Training Needs Analysis and Evaluation within Oil/Gas, Nuclear, Defense and Railway Industr

manager/worhop/service/electrical

Instrument Engineer

Senior management professional with extensive experience in Management & Operations of IT & Telecom Networked Infrastructure and Systems, Managed Services, Information Security, Process Modeling, SAP Implementation, Consultancy etc across industry segments.

Division Order Analyst, Lease Analyst, Land Analyst

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

MWD/LWD Field Service Engineer (4 yrs), Drill Bits Evaluation & Sales Engineer (2 yrs)

I have been working as an Instrument Technician for 4 years in an Oil/Gas company.

Mud Engineer looking for work.

HSE/Safety construction professional in the oil and gas sector-15+ years experience with major clients on construction of LNG, pipelines, GPP, marine, jetties, tanks, buildings, fabrication shops, shipyards.

More than 10 years of post graduate experience in project, safety, inspection, designing engineering & management in the oil & gas industries. Skilled in offshore, onshore & land engineerin. Proficient in excel, MS word, Premavere, introduction to AutoCAD. B.Eng in mechanical engineering.

I am working as welding inspector in oceanreeng ois project Ras Gas. And befor date of 28 april 2007 working with EIL project Burj Dubai Development & GRAVITY BASE STRUCTER IN DUBAI DRY DOCKS.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 [ 100 ] Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out