Resume - Electronics Engineer/Technician

Misco Jobs

Resume #74519

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

My career objective is to be in a company and in an area that will allow the appreciation, the knowledge and experiences that I have gathered to improve and guide the future of the organization. Given a chance, I will prove that I shall be an asset to the Organization. Parallel I have gained sufficient knowledge in own continuing field.
PERSONAL PROFILE:

Father's Name: Muhammad Anwar Khokhar (Late)
Nationality: Pakistani
Domicile: Sindh (Urban)
Religion: Islam
C.N.I.C No.: 42201-8839273-1
Date of Birth:: 15 December, 1981

ACADEMIC/TECHNICAL EDUCATION:

2005-2007 Bachelors of Technology (B-Tech) ELECTRONICS Specialization
Indus Institute of Higher Education Gulshan-e-Iqbal Karachi.

2004-2005 PAK-SWISS PCSIR (Pakistan Council of Scientific & Industrial Research Lab)
Post Diploma Training in INDUSTRIAL ELECTRONICS.

1998-2001 Govt. Jamia Millia Polytechnic Institute Malir Karachi-Pakistan Diploma of
Associate Engineer (INSTRUMENTATION & PROCESS CONTROL) 1997 Govt. Jamia Millia Polytechnic Institute Malir Karachi-Pakistan

T.S.C In Mechnical Drafting (Equivalent Matriculation)

PROJECTS/RESEARCH REPORTS:

Wind power generation
Designed the PCB layout of dual Power Supply on DIPTRACE
Regulated Fixed Power Supply
Regulated Variable Power Supply
Function Generator
Digital Clock

COMPUTER SKILLS:
AUTO CAD
Microsoft Office Complete
Diptrace PCB Designing Software.
ORCAD PCB Designing Software.

WORKING EXPERIENCE:

From 29 May, 2005 to Date, As R&D/PROJECT INCHARGE in PAF-KIET.

About Three-Year's Experience as a ELECTRONIC TECHNICIAN, In Engineering & General Services (E&GS) From 05 September, 2001 to 10 March, 2005.

About Two-Year's Experience as a INSTRUMENT TECHNICIAN, in PSO (Pakistan State Oil Company Limited), From 12 April, 1999 to 02 August, 2001

NATURE OF WORK & SPECIAL FEATURES

PCB Designing Single & Multilayer (Top Bottom).
Engineering Labs Inventory Maintain.
Lab Equipment Repairing.
Calibration.
Printer Repairing.
Digital logic card
Control Valves.
Transmitters
Troubleshooting.
Electronic Card Problems.
Communication Circuit.
I-P Converter & P-I Converter.
PC Motherboard Repairing
Controller 89C51 Programming

WORKSHOP EXPERIENCE:

PCB Designing (ORCAD) Workshop Organizer & Technical Support Officer in PAF-KIET

SPOKEN LANGUAGES:

English Good
Urdu Excellent
Punjabi Excellent
Sindhi Fair

EXTRACURRICULAR ACTIVITIES:

Research
Computer Typing
Participated in Intercollegiate Cricket tournaments

INTERESTS:

Computer Designing.
Book Reading.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 6445)

Go to Search Parameters...

Brief Description

Multiskilled Engineer as Electrician/Electrical Technician/Tour Pusher/Driller

24 Years of Rotating Equipment, Mechanical Engineering Expertise gained in Oil and Gas Field Construction, Operation, Production, Installation, Commissioning and Maintenance. Offshore, FPSO, and also Onshore Facilities experience. Rotating Equipment Specialist, in both Gas Compression and Liquids Sh

QA/QC ¡V Inspector civil and structural

I have been working abroad at the service of oil and gas industry, and I have had a great deal of experiences for the design of the largest DP3 drilling rigs and FPSO’s. My position as a lead representative for a large shipbuilder design team has taught me how to meet each customer's expectations.

6 years oil field services experience & enthusiastic oil safety

15 Years extensive experience in the cathodic industry. „»Handling independently turnkey project in the field of cathodic protection of underground structure.testing and commissioning of cathodic protection system.AC/DC Intereference investigation and mitigation.

GIS / CAD / Ms Office / Computer Skils /

I have been working as a scaffolding professional since 9 years in oil &gas field. I can read drawings and have knowledge of risk assessment, method statements, handing over certificates, F91- scaffold inspection procedures [ scaff-tags and ladder tags], SG 4 fall arrest systems for working at heigh

Senior Field Geophysicist ; involved in planning and acquiring seismic data, infield Data processing / Quality Control.

2003 graduate from U of Manitoba Canada. Worked for Exploration companies in Southern Africa. I work for an exploration consultancy company as a geophysicist. I process airborne Magnetic, radiometric and gravity datasets in search for kimberlites and base metals. Also process wireline logging data

Mechanical Engineering Degree holder. Seven years experience in inspection of pressure vessels, heat exchangers, piping , structruals, WPS, PQR, welding inspection , Knowledge of ASME codes

Completed diploma in electrical engineering and currently working with dubai petroleum as a electrical specialist. working as a 28/28 days rotation in offshore field.looking for a job as a electrical technician in offshore field.

Experience: 4 years in the field of Power plants design and Execution, Qualification: Masters in Structural Dynamics

Petroleum engineer

Production Engineer in several methods as: Gas Lift, Rod Pump, Jet Pump, Plunger Lift. High knowlegment in the surveallence of production process. I´ve been working to Petrobras since 1998 in the Eastern & Western of Venezuela. Now I´m finishing a MBA I hope to finish in July 2006.

Do have 20+ years experience as coating inspector and am Nace certified coating inspector # 12470, highly skilled and specialised in pipe & tank coating, GRE linings, FBE pipe coatings/field joints, plural pump application. Work world wide. CV on request.

Mechanical Engineer - Maintenance / Planning / Project - 13 years of experienc.

Highly self motivated and goal-oriented professional committed to pursuing a long term career in petrochemical / chemical industries. Has 11-year experience on maintenance, repair and routine calibration, with strong analytical and problem solving skills, on analyzers.

Piping Supervisor / Piping Area Team Leader / Sr. PDS Pipe Designer / PDS Instructor / Piping Field Engineer

More than 5 years of extensive experience of working on conceptual, basic and detailed equipment designing for Oil & Gas, Petrochemicals, Pharmaceuticals Plants including mechanical Design of Columns, Pressure Vessels, Heat Exchangers, wind & seismic analysis as per various national and internationa

I'am a Dutch Junior geologist. I hold a masters degree in Earth Science (university of Amsterdam). I worked little over a year in Almaty, Kazakhstan as a geologist/seismic interpreter. Flexible and willing to work in any of the CIS countries as a junior geologist. I speak Dutch, English and Russian.

A Post Graduate Mechanical Engineer with specialization in Energy conservation and management with an extensive experience in Basic Mechanical System engineering and Project Engineering for various range of power projects. Overall project coordination, Designing of various systems in Power plant

Familiar with Electrical & Instrumentation diagrams; Control & Protective relaying diagrams; Power System Single Line Diagrams. Able to perform material costing.

For the past 5 years my career with MES, CHEMIN,CEGELEC and TOTAL E&P, YEMEN has focused petrochemical, onshore oil and gas production operations in India and Middle East, now I am working as a Pre commissioning & Commissioning Engineer of the TOTAL E&P oil field located in Republic of Y

Currently Senior Piping Designer, responsible for design of piping systems to conform to codes and design parameters.

DCS engineer having 5 years experience in engineering / Commisioning/ Start up of YOKOGAWA CS3000 DCS System

Currently I am working in a leading oil and gas consultancy firm as a process design engineer since last five years. Hands-on experience in CDUS, VDUS, Visbreaker units, Hydrotreaters, LPG recovery units etc. My responsibility includes process conceptual design, process simulation, PFD with HMB etc.

B.E. MECHANICAL ENGINEERING WITH FIRST CLASS WITH DISTNICATION FROM REGIONAL COLLEGE OF ENGINEERING & TECHNOLOGU, SURAT. (JUNE-2001.)

Process Engineer with 5 yrs of experience in Oil & Gas field;B.E. (Chemical Engineering) from Jadavpur University, Kolkata with 86.45% marks, Hands on experiance in HYSIS, HTRI, Flarenet

E/I SUPERVISION for construction , commissioning of Oil & Gas processes

„« Reservoir Engineering, fluid property analysis, pressure transient analysis, reservoir characterization, reservoir management, and good knowledge of production optimization (managing wells), and understanding of surface facility issues.

+15 years experience pulling ,running and comissioning ESP completions world wide. Run life development etc

Petroleum engineer in Oil Production (rotation schedule)

Electrical Engineer, Automation and Controls Dessign, Testing and Commissioning Engineer, Project Engineer, Support Engineer

Masters degree in Civil/Structural engineering with more than 9 years experience in Oil & Gas projects for prestigious clients. Have about 7 years experience on Canadian projects including modular engineering (lifting, transportation analysis). Proficient in US, Canadian and Indian Codes.

Competencies: NT Administration * Database Administration * Helpdesk Support * Hardware / Software Installation and Configuration * Disaster Recovery Oracle * Microsoft Visual C#.NET * ASP.NET * ADO.NET * SQL * T-SQL PL/SQL * Microsoft Visual FoxPro * XML * Windows 95/98/2000/NT4/XP * TCP/IP *Novell

A professional geophysicist based in Singapore, with extensive experience in various aspects of geophysical data acquisition, processing, interpretation and QA-QC of analogue and digital Surveys. Looking for challenging and interesting opportunities worldwide.

Material Engineer / Material Specialist (Cataloguing / Recommending Spares)

C& I Engineering & Design, EPC, P&ID, Project Management, HAZOP, Intools

i am intersted in working as a maintenance planner / scheduler

Chemical Engineer having 19 years experience in Petroleum Refinery, Out of this I have worked for 16 years in India( former Esso Oil Company), Bombay Refinery from Oct-1984 to Sep-2000 and last 3-1/2 years have been working in KNPC, MAB Refinery in Process Engineering Dept.

INSTRUMENT TECHNICIAN FOR OIL & GAS FIELDS

Cathode Protection Engineer / Manager with more than 10 years of experience in marine, off-shore etc with knowledge of design, tenders, standards etc.

Expert in Environmental Engineering, I plan to work and live in Abu Dhabi.I am qualified in Environmental Protection for: Environmental Certification, Environmental Surveys, and Environmental Pollution Monitoring for Oil & Gas Industry with 10 years experience.

Professional Experience 1. Schering-Plough Singapore as Control Systems Engineer 2000-present 2. Yokogawa Philippines Inc. as DCS Systems Engineer 1996-2000 Education 1. Bachelor of Science in Computer Engineering 2. Diploma in Instrumentation & Control Technology

Over Nineteen plus years of experience in the areas of Maintenance Management, Planning and "Hands On" Supervision of maintenance activities, installation and commissioning of new facilities.

A Chemical Engineer with over 12 years of experience in the field of Safety & Risk consultancy. Trained in leading HAZOP studies, QRA, HAZOP, HAZAN, PHA, Review of Fire Detection & protection Systems, Safety Audits, Transportation Risk Analysis, Insurance Risk Surveys, etc.

Senior wireline logging engineer seeking a full time position as logging witness/supervisor

Electronics Engineer/Technician

I have 16 years of experience in welding and NDT Inspection. I have welding and Painting Inpsection Qualification. I have experience in pipeline, process piping, pressure vessels inspection.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out