Resume - Two years post apprenticeship training as a Welding Engineer, under the supervis...

Misco Jobs

Resume #74576

CONTACT INFORMATION:
View contact information...

IEng. MIIE. (Mech.)

Position applied for: Quality Manager.

Previous position: QC Manager Mechanical.

Qualifications:

H. N. D. in Fabrication &Welding Engineering 1993-95, completed at the University of Teeside School of Science & Technology, Middlesbrough.
CSWIP 3.1 Certified Welding Inspector. CSWIP Cert No. 4488. Expiry Date 5/4/2006. Currently awaiting renewal.
Member of the Institute of Incorporated Engineers. Membership No. 511256.
Registration with the Engineering Council as an Incorporated Engineer.
O. N. C. in Fabrication & Welding Engineering, 1978-81 gained at Hartlepool College of Further Education.
Four year EITB apprenticeship, 1978-81 served with Foster Wheeler Power Products Ltd. Hartlepool.

Summary of Professional Experience:

Two years post apprenticeship training as a Welding Engineer, under the supervision of the senior welding engineer, working on the manufacture of overland pipelines, pressure vessels, nuclear pressure vessels, heat exchangers and various projects for the Middle East and Libya.
Twenty two years experience in quality management, working mainly in the oil and gas sector both in the UK and overseas.
Responsibilities have included vendor assessment, internal audits, producing procedures to cover the whole scope of welding and NDE operations for any given project before and during fabrication. Maintenance of these procedures and welder qualification databases, analysis of NDE results and any defect trends, recommending resolutions to meet quality and production targets and formulation of inspection and test plans.
These tasks have been achieved within the appropriate specifications e.g. API 1104, BS4515, BS5500, ASME B31.3, ASME IX, AWS D1.1, ASME V, ISO 9000 series and client specifications.

Employment History:

Dec. 2005 – Current
Chiyoda Technip Joint Venture, Qatar Gas II Expansion Project LNG, Ras Laffan, Qatar.
QC Manager mechanical with EPC Contractor, responsible for review and approval of all sub contractor welding procedures. Review and approval of sub contractor quality procedures, ITP,s and all NDE procedures. Supervision of a team of forty welding inspectors. Monotoring of welder qualifications and repair rates using Piping Inspection & Control software. Focal point with client and sub-contractors for all QC issues related to welding on all aspects of the project, LNG tank fabrication, off plots and utilities and process pipework.

Nov. 2003 – Oct. 2005
Chiyoda Foster Wheeler, Qalhat LNG Train 3 Project, Sur, Sultanate of Oman.
QC Superintendant with EPC Contractor, responsible for review and approval of all sub contractor welding procedures. Review and approval of sub contractor quality procedures, ITP,s and all NDE procedures. Supervision of a team of eight welding inspectors. Monotoring of welder qualifications and repair rates using Piping Inspection & Control software. Focal point with client for any QC welding problems arising during production welding.

Jan. 2000- September 2003
Oderbrecht Engineering Ltd, Commercial St. Middlesbrough.
QA welding Engineer responsible for design and qualification of welding procedures for use on structural steelwork, process pipe work for static offshore structures and FPSOV's. Preparation of Inspection and test plans and vendor assessment.

Aug. 1998 – Sept. 1999
Dodsal & Co. LLC. PDO LNG Upstream Gathering System, Interfield & GGS Interlink Pipelines, Saih Rawl, Sultanate of Oman.
Project welding engineer. Responsibilities included, subcontractor audit, design and qualification of all mainline and process pipe work welding procedures, using both manual and mechanised processes. Design of procedures for overland carbon steel pipelines, duplex pipeline and station works in accordance with API 1104 and PDO Specifications.

July 1997 – July 1998.
Dong Ah Consortium, Dong Ah House, 693-717 London Rd. Hounslow, Middlesex,TW3 1SB.
Project QA welding engineer based at Benghazi HQ Libya. Responsible for all welding activities on the Great Man Made River Project. Also responsible for QA audits, both vendor assessment and internal. OJT of QC staff in welding inspection and NDE techniques.

Oct. 1995 – June 1997.
Industrial Resource Services, contracted to SLP Engineering, Commercial St. Middlesbrough.
Piping/Welding Engineer, responsible for designing and monitoring all on site welding procedures for Shell and Britannia offshore installations. Also responsible for quality requirements and inspection and test plans during and after fabrication.

Feb. 1991 – Sept. 1993.
C. D. Welding & Inspection, Crofton Rd. Stockton, Teeside.
QA/Welding Engineer, writing and qualifying welding procedures for use on Duplex and 300 series stainless steel process pipe work. Working within specifications such as BS 4515, ASME B31.3 and ASME IX. Also responsible for quality requirements during production welding.

Aug. 1988 – Jan. 1991.
P. E. C. Ltd. Hatfield, Herts.
Welding Engineer qualifying and managing welding operations on various construction projects, e.g. Gas platforms for Hamilton Bros. Overland pipelines for British Gas and structural steelwork for the A55 Conwy tunnel bypass.

Mar. 1983 - Aug. 1988.
Foster Wheeler Power Products Ltd. Brenda Rd. Hartlepool.
Welding Engineer designing and qualifying welding procedures for use on nuclear equipment such as steam generators, and ion exchange columns using stainless steel, monel, inconel and cupronickel, with GTAW and SMAW processes, within a documented quality system.

Aug. 1981 – Feb. 1983.
Foster Wheeler Power Products Ltd. Brenda Rd. Hartlepool.
Trainee Welding Engineer working under the supervision of the senior Welding Engineer. Designing and qualifying welding procedures for Orbital GTAW, SMAW and SAW processes. Working within the specifications BS 5500 and ASME IX.

July 1978 – Aug. 1981.
Foster Wheeler Power Products Ltd. Brenda Rd. Hartlepool.
Four-year EITB apprenticeship as a fabricator welder, including one year broad based training in welding & fabrication, machine turning & fitting and basic electrical work. Three years practical training in all aspects of fabrication & development work. Specialising in pressure vessel construction. Achieving an ONC in Fab & Welding Technology from Hartlepool College of FE.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 6412)

Go to Search Parameters...

Brief Description

Significant experiences in analytical and computational modeling in both structural and thermal-fluid areas. Working on offshore engineering design in shallow and deep water, which includes subsea pipeline, riser, and stinger design.

Project engineer with management skills

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

Skills : Structural Analysis & Design with help of Engineering Software qualification : Master of Engineering (Civil) Specialisation : Structural Engineering

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Management and supervisory skills

I am a Senior Petroleum Engineer Technologist with over 20 years oil and gas experience. My diverse background provides a comprehensive knowledge of all aspects within the petroleum industry.

Civil/Structural Checker with 25 years experience

21 years senior piping CAD designer with PDMS and ...

Departmental development and management of process, staff and workflow integration into corporate operations.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

Process sr engineer

Over 18 years experience in Natural Gas Engineering Field including research, planning, route survey, design, implementation, installation, testing maintenance and supervision of Gas distribution and transmission line to Industrial, commercial and domestic connections under American standards and sp

DSV with over 20 years experience.

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Senior Pipe Stress Engineer

Maint. and trouble shooting of all kinds of rotating., and static equip.,

Installatation, commissioning , maintenance & repair of all instrument working in petrochemicals plant / gas/ refinery. I also do the EPC PROJECT of Reliance retail outlet .for10 months

Upstream and mid-stream experience(27 years) plus underground waste water injection

Experienced Materials Metallurgical Engineer seeking a position in research and development facility. Has experience with fuel cells technologies, fuel reforming materials and processes, automotive industry, hydrogen related technologies, engine mechanical design.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

Anchor Handling, Rig Moves, Tanker-lifting, operations both on DP and manually

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Telecom field technicians Customer end

QA / QC Engineer - Painting / Coating / Insulation / Refractory / Fire-proofing

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Free! I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

Two years post apprenticeship training as a Welding Engineer, under the supervision of the senior welding engineer, working on the manufacture of overland pipelines, pressure vessels, nuclear pressure vessels, heat exchangers and various projects for the Middle East and Libya.

Totally 25 years experience in execution of Electrical Maintenance works in 210MW, 150MW, 120MW and 20MW Generators, Transformers, Breakers, Motors, UPS, MOV, EOT Cranes, HVAC, Lightings, Protection Relays Testing, electrical equipments and PLC, DCS, SCADA, WinCC, S5, S7 hardware

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Bachler in Arts + 3 yeart Appranticship in Instrumentation and control

having 18 years of sound experience in Commissioning and design, with Bachelor degree

unigraphics designer drafter

Interested in jobs in Saudi Arabia only. Although, I specialize in biomedical sensors and microelectronics, willing to try out other areas of Eng.. I have more than 15 years industrial experience in diverse engineering disciplines.

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.

22 years of aircraft maintenance related experiences with the United States Air Force

Currently working for Raslanuf oil and Gas Company (RASCO) as Senior Process engineer, Working within Technical services department Process engineering Division.

Reservoir, simukation and production engineer

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out