Resume - Sr. Drilling & Completion Consultant

Misco Jobs

Resume #74591

CONTACT INFORMATION:
View contact information...

OVERVIEW

Result oriented engineer with extra organizational skills and over 20 years experience in the industry (Drilling, Completion and Work over), well versed in all activities related to on-shore and off-shore / deep water up to 3000' WD operations in remote and harsh environments. Well planning, designing, permitting, AFE, rig sizing- selection and acceptance, Procurement, logistics coordination, field supervision and management expertise, monitor day-to-day operations and effectively manage more well plans while freeing up time to focus on mitigating critical risks and reducing non- productive time (NPT).

Liaise with the subsurface groups to ensure required data is available to drill the wells. Prepare all relevant information to meet all requirements of the region's regulations as related to drilling activities. Submit required information to the region's authorities in accurate and timely manner to ensure necessary permits are in place. Prepare drilling well designs (programs) and AFE setting out materials, equipment, procedures and safety precautions. Overseeing drilling engineering engineers. Monitor daily well progress; provide verbal and written technical input as required to Operations groups. Networks with other major projects and service suppliers for design optimization complete technology plan for step-change improvements to rig. Assist in the investigation of non compliances and that lessons learned effectively communicated.

Deliver upper docile drilling cost performance with respect to industry peer group. Ensure all cost accounting and procurement procedures are followed by the team, including documentation and records keeping. Be informed on content and impact of host country Concession Agreements, Production Sharing Agreements and Joint Operating Agreements and adhere to the requirements of these agreements. Counsel Exploration team members on the impact of these with respect to planning and execution of projects, conduct drilling and service contract negotiations as needed,.

Manage HSE and Risk issues, control well cost and evaluate well performance utilizing specialized drilling software targeting reservoir zero skin damage to maximize well productivity. Provide technical support to all related jobs on the rigs. Experience with HTHP - H2S Environment gas wells requirements and operations. Fairly acquainted with aspects associated with vertical, deviated, horizontal drilling. ERD, MWD, MLT, UBD, well intervention activities; Slickline, Wireline Logging, perforation, CT, testing, acidizing, Frac-ing, Gravel Pack, Frac-Pack, Wire-Pack…etc.

Familiar with GOM loop current and eddies phenomena and the effects on the drilling riser, vessel positioning and metal fatigue.

ACCOMPLISHMENTS

 Brazil; Conceptualised and Designed Doam Joa field ERD project, offshore Brazil, depleted reservoir.

 Angola Offshore Deep Water; Achieved record drilling surface hole section and cased hole without down hole problems offshore Cabinda in 7 hr. versus 11 days record.

 Mexico; Effectively led the well completion project of Burgos development from inception to production maximizing deliverability by 30% more than the plan and deliver the 30 wells project 3 – days ahead of schedule.

 USA; Oversee the execution of the T-BAR-X DAUNTLESS # 1 well operations and online data base (Slim hole, Underbalance, HTHP and Acidic gas well in the Cotton Reefs).

 Designed and implemented UBD technology applications and achieved excellent productivity results (PI >120 m3/d/bar) with minimal formation damage and eliminated intermediate casing minimizing down hole problems in the Rockies.

 Nigeria; Successfully prepared, modelled and implemented various Sand Control (Frac pack, HRWP, IGP, etc) in offshore and deepwater (up to 1500m of water depth) environment yielding low skin and low draw-down with substantial high productivity results (with a lot of lessons learnt for field developments in future).

 Venezuela, Lake Maracaibo; Designed and supervised the installation of various types of well completions (including Sand Control internal gravel pack operations, selective completions, water producers, water injectors, etc.

MEMBERSHIPS

 Member Society of Petroleum Engineers, SPE

SOFTWARE

 Author of Drill Bits Economic life real time tracking software

NOMINATION

 Nominated by Schlumberger President to be Schlumberger West Africa Drilling Centre Manager in 1998

LIST OF INDUSTRY TECHNICAL TRAINING

 IWCF Combined Surface & Subsurface BOP's Stack
 RGIT Offshore Survival including Norway
 Directional Drilling Course
 Stress Check Casing Design
 Casing Point
 Drillmod
 Frac Pro-1
 Halliburton 403 Course
 Magcobar Drilling Fluids Course.

LIST OF COMPUTER SOFTWARE

Diswin, Rimbase, Dimis, Perc, Stress Check, Casing Point, Frac-Pro Windows – NT, XP, Vista, MS – Office 95 / 97 / 98 /2000 / 2003 / 2007, Windows-XP, MS – Project, MS- Composer, MS-Imaging, Drilling Tool Box, Smart draw, Drilling Research software, Maurer Engineering drilling suite.

LANGUAGES

English / Arabic / Spanish

EMPLOYMENT HISTORY

JANUARY 10TH, 2008 - PRESENT
PPIME
WELL DRILLING & COMPLETION SPECIALIST
Responsibilities include:

Responsible for the engineering, design and implementation of drilling projects for new well, completions, workovers and stimulations. Lead, manage and coordinate day to day onshore drilling activities for internal and external teams of employees, contractors and consultants against assigned projects, ensuring a cost effective and efficient performance.

Making operational decisions as necessary to improve drilling and completion methods, techniques and efficiency. * Providing advice across the business by keeping abreast of new trends, techniques and technology in drilling engineering and operations. * Developing and applying knowledge of environmental regulations, engineering standards, field operations and well control principles.

ERD Well Construction Specialist
PEMEX
Mexico
September 15th, 2007- December 15th, 2007
Oversee Mesozoic Deep, HPHT Long Lateral Displacement Wells Integrated Project Management and Well Construction Challenges tapping Remote Reserves Arenas.

The Bermudez Complex structure complexity being in advanced stage of depletion and tectonically disturbed by fractured and faulted blocks imposes tentative Geomecanics, which requires extensive and challenging well construction planning to isolate different pressure regimes, an environment which requires precise control of the annular pressure profile throughout the wellbore to ascertain constant BHP within the narrow operational window during drilling and shutting down rig pumps.

Such complexity dictates careful measures be taken for narrow MWT / FG window, hole cleaning (Barite sag & Cutting beds), ECD, hydraulics and mud theology management, torque, drag, mud system / borehole stability (affected by Mwt. & salinity) / Lubrication and casing and liner running

* Evaluate, plan, design and execute Long Lateral displacement wells up 6000 mts (Hole Cleaning, Torque/Drag, casing Flotation, MPD, and AFP/ECD…etc.)
* Networks with other major projects and service suppliers for design optimization.
* Leads special engineering technical studies, teams and task forces as required toward meeting Drilling objectives.
* Oversees the preparation of tenders and evaluation of bids to meet IPM objectives.
* Real-time advice on operations and other matters affecting the rig performance.
* Evaluates operational risks economic impact versus technical and business decisions.

PPI _ TECHNOLOGY MIDDLE EAST,
CAIRO, EGYPT
JAN 2007 - JUN 2007: WELL DRILLING & COMPLETION SPECIALIST
Responsibilities include:

Well Drilling /Completions Engineering and Operations Support:

* Review of well drilling & completion existing design for work-over and new wells.

* Review and optimization of well completion execution program using industry best practice.

REPSOL_YPF / OILFIELD INTERNATIONAL
COMODORO RIVDIVIA,
ARGENTINA

AUGUST 2006 – JAN 2007: SENIOR WELL ENGINEER

Responsibilities included:
Studying and optimising well design of Cañadon Seco and Pico Truncado fields Economic Development Study, applying different development techniques to minimise OPEX and NPT while targeting zero skin damage for maximum production and rate of return on investment.

Aug 05 – Present PPI_TECHNOLOGY SERVICES Middle East Ltd – Egypt

Contracted as Drilling and Completion Specialist, handled operations in Egypt for Centurion and North Sinai petroleum companies.

Apr 02 – Aug 05 PPI_TECHNOLOGY SERVICES – USA

Contracted as Drilling and Completion Specialist, handled operations in Nigeria and Algeria as follows:

Consultant _ Drilling & Completion Operations
April 02 – Oct 03 then June 04 – Aug 05
For
PPIN- TECHNOLOGY SERVICES – NIGERIA: Oversee drilling, completion, QA/QC and EVI activities for ExxonMobil-Erha, Addax, Shell- Bonga and MoniPulo in Nigeria. Oversaw daily operations, drilling practices, safety and cost. Assured detailed records of all aspects of the operations were kept and that all operational reports were submitted in proper form and timely.

Country Manager
Oct 03 – June 04
For
GULF KEYSTONE ALGERIA LTD – ALGERIA; Contracted to oversee 4 exploratory wells operations, Fault / Anticline Trap, remote desert wells operations, liaised all company affairs in country, OBM waste management, solidification, Dev. / HZ Wells operations.

Dec 01 – Apr 02 SIERRA ENGINEERING / SOVEREIGN OIL & Gas Co., NIGERIA
Senior Drilling Engineer / Drilling & Completion Manager
OPL 205- 206

In charge of upcoming 2 appraisal wells onshore Nigeria, and 1 exploratory well drilling and completion operations, harsh and remote environment operations. Supervised technical review, well design, AFE, rig sizing & selection, bidding services, reviewed & selected project providers, Procurement,….etc.

Oct 97 – 2001 PEII, USA
Petroleum Consultant

Handled several office and field drilling, completion and work-over assignments in different parts of the world for several clients. Drilling, Completion and Workover Consultant, supervised all aspects of drilling, completion and workover in open water, over platforms and inland for several oil & das operators domestic US (GOM & LA) and overseas.

Contracted to El Paso Energy, USA as Senior Drilling Engineer for implementation of drilling optimization, cost optimization and best operational practices in the Rockies. Technically supported and monitored 4 rigs, well planning, AFE, Logistic coordination, drilling operations. Monitored hydraulics to assure that hydraulics used is near optimum as equipment available. Monitored Drill-off tests to assure that penetration rates at or near optimum for the drilling situation. Reviewed and evaluated all drill bits when pulled and, as appropriate recommend changes in bit selection and drilling parameters to the drilling supervisor. Monitored daily drilling cost, analyzed it and made recommendation to minimize cost without jeopardizing best operational practices or safety. Maintained accurate records, including curves and graphs, relative to drilling progress and cost.

Contracted as TDC Energy, USA as Expert Witness to oversee ADTI turn key completion operation offshore G.O.M. Based on jack – up operations, wrote post frac – pac analysis report.

Contracted to Medex, France as Drilling Manager. Drilled offshore Tunisia the step out well - El Fel # 1. Was responsible for contractor bids, vendor's selection, drilling engineering and operations in Tunisia. Supervised budgeting, support services and cost control.

Contracted to Matrix Oil & Gas, INC. USA as Turn Key Operations Witness to witness their GOM OCS - G 190 # B-10 offshore development well drilling operations. Ensured drilling programs were carried out efficiently, safely, professionally and at a minimum cost. Liaised operations with Materix Field Production Superintendent (simultaneous operation). Assured detailed records of all aspects of the turn key operation were kept and that all operational reports are submitted in proper form and timely.

Contracted to Blue Star Oil & Gas LTD, USA Expert Witness for their Underbalance Cotton Reef HTHP Slim Hole well, the T-BAR-X DAUNTLESS # 1. Oversaw daily operations, drilling practices, safety and cost. Assured detailed records of all aspects of the Turn Key operation were kept and that all operational reports were submitted in proper form and timely. Verified and signed daily IADC reports. Kept records of failed equipment and Non – Productive time. Planned, designed and executed project digitized database. Audited both Drilling Fluids Company and Fluids Hauling Company records for Arbitration.

Contracted to Halliburton Energy Services Integrated Services as Drilling & Completion Intl. Lead Engineer / Manager. Designed Doam Joa field ERD project, offshore Brazil, depleted reservoir, foam gravel packs w / MCS, performed with both compressed air and nitrogen mixture. Implemented completion 30 development wells (Burgos Project) onshore Reynosa, Mexico for PEMEX. Participated in planning and implementation of completion and evaluation phases. Full operational responsibility (Office engineering & Field supervision) as well as coordination of Halliburton Product Service Lines in 'Lump Sum' operations. Additional responsibilities included administration of completion service contract, operations quality control, procurement activities and statutory obligations.

Contracted to NewCorp Energy Inc., USA as Senior Drilling Engineer designed AFE Naka Field, ST. Landry, Parish, LA to drill vertical mother hole to core Sparta "A" Sand to evaluate the reservoir, then drilled Horizontal underbalance to achieve zero skin, 2000' lateral displacement. Utilized Weatherford downhole deployment valve technology and prepack screen completion across the lateral open hole interval.

Contracted to Fairways Offshore Exploration Corporation, USA as Turn key / Workover consultant to P&A depleted interval and re-completed another – in OCS – G 5625 Well NO. A – 4 ST 1. Was responsible for contractor bids, vendors selection, workover engineering and operations, mobilization, logistics coordination, supervision (Supervised well lubrication – pump & bleed procedure, underbalanced TCP). budgeting, support services, cost control and operation documentation.

Contracted to TDC Energy Inc., USA as Workover Foreman to de – salt producing well offshore GOM. Was responsible for operations, mobilization, logistics coordination, supervision, support services, cost control and operation documentation

Contracted to Santa Fe Energy Resources, USA as Completion Foreman to de – complete and replace failed down hole equipments and Re – complete the OCS - G - 15323, well # C-2.. Was responsible of offshore completion operations supervision.

Contracted to Murrphy Exploration & Production Co., USA as Expert Engineer to Audit East Polar Unit wells files for arbitration in respect to the local water aquifer contamination.

May 97 – Oct 97 LAGOVENA – VENZUELA thru Triton Engineering
Consultant Drilling & Completion Engineer

Based on Pride II & Pride I Barges. Engineered and supervised drilling and completing horizontal entry wells. Prepared daily drilling reports using DIMS, casing and cement report, daily well cost reports, NPT reports, weekly HSE report, well Close-out report. Oversaw all critical rig operations including drilling, logging, casing and cementing, completion running. Prepared activity reports on each. Maintained material stock and inventory on rigsite. Monitored mud chemicals, fuel and drill bit usage. Prepared the detailed completion design of well conduits including specification and selection of all accessories / hardware like Tubing, Packers, Seals, Liner hanger, Pre – Packed "SLIM – PAC" Steel liner, GLM's, safety devices, wellhead and xmas tree.

1996 – 1997 UMIC – IVORY COAST
Consultant Drilling Engineer

Based at office in Abidjan was in charge of well planning, designing, permitting, AFE - preparation, logistic coordination. Monitored day-to-day operations. Evaluated well performance by utilizing specialized drilling software and technically assisted 2 jack - ups drilling operations, directional wells (Compact Driller & Adriatic - IV). Cameron Weight –Set Mudline Suspension System with wash ports (WMSW), RFT, DST, Supplement AFE, Cost breakdown, Map field bits Cost / FT and optimized drill bits selection.

1994 – 1996 CHEVRON - ANGOLA
Drilling & Completion Foreman

Based onboard Brazilian and French jack - ups, tender supported platform rig and Semis. Water depth +/- 3000', high temperature with hole section up to +/- 14,000'. Drilled high angle Directional wells. Supervised completion operations including gravel-packing, acid stimulation, perforation, chemical consolidation, packer and liner hanger running, completion running, wellhead make-up, flow-line hook-up, DST, well testing in single and dual. Cased Multi-zone wells completed with Halliburton Multi – Zone Stacked Completion Assemblies Versa – Trieve / Multi – Position; BHD Hyd. St. Pkr – Versa-Trieve Pkr – MCS closing Sleeve – MSJ shear sub – Blank pipe – Production screen – landing nipple w / collet – indicator seal ass. – Versa-Trieve packer – MFS Ported Flow sub – Collet seal Ass. – MSJ Shear Sub – Blank Pipe – Production Screen – Sump Pkr. And Seal Ass. An Extended Length System Versa – Trieve / Multi – Position was utilized in Floater applications where the flow sub and service tool assemblies have been lengthened (Safety Margin) to compensate for thermal contraction and ballooning of the work string at the Pkr.

1988 –1994 SHELL - SYRIA
Drilling & Completion Foreman

Onshore drilling & completion foreman supervised all aspects of drilling and completion operations, logistics coordination, oversaw support services, cost control and operation documentation.

1986 – 1988 BAKER HUGHES INTEQ, QATAR
District Manager

Manages the operations of a district, products and services including employee management and development, inventory management, sales, HSE, engineering, maintenance, operations, service, …etc

1984 – 1986 I.O.C. (AGIP), EGYPT
Completion & Workover Foreman

Onshore completion and workover supervisor, supervising all aspects of completion and workover operations.

1982 – 1984 MAGCOBAR – EGYPT / GREECE / NORTH SEA
Mud Engineer / Area Engineer

Engineered and supervised different drilling fluids systems, completion fluids in the field (N. sea & Egypt) to an Area engineer in charge of three platforms completion operations offshore Greece.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 6997)

Go to Search Parameters...

Brief Description

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

A well rounded drilling personnel with a unique experience in drilling and completion / work over operations

Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.

Quantity Surveyor/Estimator (Mechanical)

All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.

Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction

Primavera , MS Project

A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.

Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.

i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.

I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.

ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.

I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures

Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.

7 years experience in Mechanical maintenance

- Good at English and drilling software.

16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).

GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS

Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.

Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).

An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.

HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date

Oil and gas mechanical technician

I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.

Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.

See resume

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

Sr. Drilling & Completion Consultant

Chemical Engineer with 15+ years experience in upstream oil/ gas exploration & production industry. Experienced in equipment sizing, hazards and effects process tools application (i.e. HAZID, HAZOP, JHA etc.), process simulations, process optimization, feasibility studies, concept identification,etc

Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

Electrical Power Management and Control System, Offshore Electrical and Instrumentation Control System, LV, MV and HV power distribution, VFD, GE Multilin protection relays,DCS (Emerson DeltaV), PLC (Allen Bradley, GE Fanuc, Omron), SCADA (Citect) systems, Safety Instrumented System (HIMA), system.

Plant and DCS operator

I am interested in exploring the possibility of employment through your Organization. My background includes experience of over two years as a Trainee Mud Engineer on offshore platform in Petrobaltic S.A.

GIS Specialist

I am a Mechanical Engineer with over 20 years of oilfield experience in Drilling, Well Intervention, Cementing and downhole tools

B.E. Mechanical engineer with 6 years experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out