Resume - More than 10 years of post graduate experience in project, safety, inspection, d...

Misco Jobs

Resume #74930

CONTACT INFORMATION:
View contact information...

PERSONAL DATA:
SEX: MALE
DATE OF BIRTH: 16TH JULY, 1967
PLACE OF BIRTH: ABA
LOCAL GOVT. AREA: OBINGWA
STATE OF ORIGIN: ABIA
NATIONALITY: NIGERIAN
RELIGION: CHRISTIANITY
MARITAL: MARRIED

QUALIFICATION:
First School Leaving Certificate, 1981
West African School Certificate, O' Level Certificate, 1988
Enugu State University of Science & Technology, 1993 Bachelors Degree Mechanical Engineering
University of Port Harcourt Masters Degree Mechanical Engineering. (Degree Awaiting)

MEMBERSHIP OF PROFESSIONAL BODIES:
Nigerian Society of Engineers (NSE) – Membership in progress
Nigerian Institute of Safety Professionals (NISP).
ACHIEVEMENT: Author of Books

COURSES ATTENDED:
Nigeria Society Of Engineers Workshop/Seminar (Awareness courses on the following: Project Management, Basic engineering economics, Preparation of Bills & Cost estimate, Consultancy engineering practice, Procurement procedures, Analysis of tender, Engineering entrepreneurship, Residency procedures and Cost engineering)
HSE(Health, Safety & Environment) Competence Development Course Level 3 by Nigerian Institute of Safety Professional, Warri.
Enhanced Contract Management, CMG 1Course for Company Site Representatives by Shell Nigeria, Warri.
Hearts & Mind, a behavioral based training workshop by Shell Nigeria, Warri.
Minimum Health Training Course by Shell Nigeria, Warri.
Journey Management Training Course by Shell Nigeria, Warri.
Environmental, Social and Health Impact Assessment Course (ESHIA) by Shell Nigeria, Warri.
Competence Assurance for HSE Critical Activities Course by Shell Nigeria, Warri.
Hazards and Effects Management Process (HEMP), HAZOP & HAZID courses.
Health Safety and Environment (HSE) Participatory workshops in Technical Project West Forcados (TPWF) for Host Communities.
Basic Fire Fighting Course by Shell Nigeria, Warri.
Basic First Aid Course.
Management of Contractor HSE by Shell Nigeria, Warri.
General Workplace HSE Practice Course by Shell Nigeria, Warri.
Driver Education Programme (DEP) by Shell Nigeria, Warri.
Corporate Waste Management Awareness Course by Shell Nigeria, Warri.

SUMMARY OF EXPERIENCES:
More than 10 years of post graduate experience in management and engineering profession with many years of relevant working experience in the oil & gas, and production industries. These include: Sand Filling, foundation piling, fabrication and Installation of oil & gas facilities in Brownfield & Greenfield, surface/subsurface, onshore/offshore locations, preparation of oil locations, field logistics base site construction, suspended buildings, internal road networks, borehole drilling, fencing, pipelines/piping, pigging process, NDT/MPI tests, quality and asset control, condition monitoring of plants & pipelines, laying of subsea pipeline, electrical installations, safety and environmental impact assessment.
COMPETENCIES:
Manage and monitor projects. Define and quantify project specifications, deliverables for facilities construction. Coordinate commissioning process, handover and closeout of facilities after construction. Attend Bid clarification, pre-award, kick-off and post award meetings with vendors and assist in review of vendor prints like the calculations, fabrication drawings and other technical documents. Develop, monitor and control safe working procedures. Monitor and control the cost, scope, schedule and quality during project execution phases. Enhance safe working conditions, environmental impact assessment and hazard management. Liaise with stakeholders, contractors and consultants to guarantee timely delivery of quality services. Document events and send adequate reports to line authorities. In addition I can manage logistics, safe transport and handling of material & equipment, certify good condition of lifting devices.
COMPUTER SKILLS:
Proficient in Microsoft office and Outlook for e-mails management, excel, PowerPoint, primavera, Above average in use of CAD and JL Analyzer.

POST GRAUATE EMPLOYMENT HISTORY:
Position: Project Engineer: Jan. 2008 - Now
Company: Shell Petroleum Development Company (SPDC) Warri Delta State, Nigeria
Project: Community Water Project.
Scope Of Job:
Complete development of water well, design, fabricate and install submersible pumps.
Pile foundation for overhead tank structural tower, design, fabricate & install.
Provision & laying of 8000m distribution pipeline and fetching points networks.
Provision and installation of 100m3 Braithwaite tank, on 20m high structural steel tower.
Procure and install water treatment plant of 20m3/hr capacity
Provision of electrical power to the water treatment plant.
Duties & Responsibilities:
Supervise and coordinate activities of contractors for quality delivery and safety of personnel, equipment and other plants.
Supervise Designs, piling and construct of new overhead water storage tanks.
Supervise refurbishing of five existing overhead storage tanks in different swamp terrine.
Ensure that foundation Construction meet designed standards and specification.
Review Method statements, HSE plans and transport logistics for safe delivery of equipment, tools & materials.
Supervise installation of water treatment plant and pipe network for water distribution over 30km. Supervise and inspect lifting equipments/tools to ensure safe working conditions.
Organize daily toolbox meeting.
Monthly HSE meeting and sending daily reports of work progress, and look ahead activities. Monitor mixtures for quality civil cast, uPVC piping network slope, joint & flow pressure, painting to meet required specification in highly corrosive environment.
Monitor safe handling of materials and personnel in land & marine transport.
Advise on unsafe acts or conditions of personnel, equipment and materials to ensure zero fatality, standard material storage and safe working conditions.
Liaise always with stakeholders to ensure delivery on time.

Position: Project Engineer: 2005 - 2007
Company: Shell Petroleum Development Company (SPDC) Warri Delta State, Nigeria
Project:: Focados Yokri Integrated Project (South Bank Swamp).
SCOPE OF PROJECT:
De-bushing, Sand filling, piling, cutting-off pile, relocation of existing facilities & excavation
Construction of equipment foundations, plant buildings, suspended building, Field logistics base, Pipe racks.
Installation of Central compression gas plant facilities..
Installation of North Bank flow-station upgrade facilities.
Installation South Bank flow-station upgrade facilities.
Installation Yokri flow-station upgrade facilities.
Installation Forcados terminal Turbine upgrade facilities.
Installation Estuary flow-station upgrade facilities
The facilities include: Crude oil export pumps, HP, LP & Test separators, HP/LP flare knock out drums, surge vessels, AG/export compressors & accessories, AG/export compressors scrubber packages, gas turbine drivers, slug catchers, glycol regeneration package, glycol contactor, pig launchers & receivers, surge booster compressor, instrument air compressor, lube oil coolers, compressor coolers, gas metering packages, gas chromatograph enclosure, gas bottle enclosure, fuel gas coalescent filters, inlet filter packages, inlet manifold packages, chemical injection package, fuel gas skid, flare stack, enclosed flare packages, piperacks & pipe/cable tray support, transformers skids, emergency generators skids, diesel fuel package, service water skids, service water pump system, condensate bypass, installation of jackets and decks, risers and clusters, laying of flowlines and gas lines. Others include: oily water pit, plant roads/landscaping/road side drains, culverts for pipe crossings & fencing construction works, process area concrete works, control building, switch gear building, administrative, electrical substations, workshop, warehouse, laboratory, helicopter landing pad/waiting room & guard house buildings etc.
Construction of field logistics base (FLB) at CCP/CPF North Bank.
These include: accommodation buildings, medical centre, dining/kitchen building, recreation building, construction of a lawn tennis court, mini-abattoir, incinerator/waste disposal hut, internal roads/landscaping/road side drains & fencing works etc.
Structural & painting works include: Erecting telecommunication mast, pipe racks & pipe cable tray supports, pump house Stations, generator house stations, transformer house stations & all FLB buildings. Painting works include: Prepare all surfaces for painting, paint piping/vessels/all dehydration plant, paint all pipe racks/supports/platforms.
Drilling operations in Forcados /Yokri Areas.

Duties & Responsibilities In But Not Limited to:
Field Engineer
Maintain objective and balance relation with contractor and client and carry-out pre-audit inspections.
Producing the scope of work.
Bid clarifications, producing evaluation criteria and attending tender opening meetings.
Ensure that constructions are carried out according to designs.
Ensure that concrete mixtures are in compliance with mix ratios.
Ensure that reinforcements are according to sizes, spacing and numbers.
Participate in decision taking on what should be the As-built where it impracticable to follow AFC drawings.
Ensure that the activity schedules are followed and deliver within the time frame.
Inspect and sign off variations, equipment alignment, verticality, job completion.
Verify quality of materials brought to site and ensure proper storage & handling condition.
Ensure that various standards & specifications are implemented on site.
Head site progress meetings on the way forward or look-ahead.
Calculate percentage completion and advice on critical paths to follow.
Make presentation on work progress, HAZOP & HAZID
Write non-conformance/site notes when integrity is at stake.

Safety Engineer
Review of contractors HSE plan, method statement and procedures to ensure compliance with, Nigeria Department of Petroleum Resources (DPR) and Nigeria Federal Ministry of Environment, FMEV.HEALTH SAFETY AND ENVIRONMENTAL (HSE) Standards and other local relevant standards
Ensure that HSE plans and relevant HSE Management System and ER documentation is established, implemented and maintained in the project.
Pre-mobilization inspections, CASHES audits and regular site visits to the various work sites.
Pre-start-up-audit on contractor site before work commences and Periodic Site HSE Recertification
Providing support and advice to all projects and worksite personnel on matters related to HSE
Participation in, and chairmanship review of Hazard Identification and Risk Assessments as required.
Participation in accident/incident/and near miss investigations and implementation of corrective actions where required.
Involves in work safe coach among the site workers
Identification or trends regarding the recurrence of accidents/incidents/near misses providing feedback to offshore worksites, onshore worksites and the project management team as necessary.
Encourage and promote Safety, Health and Environmental awareness in all project related activities and worksites.
Development and delivery of HSE training courses to both project onshore and offshore personnel as required
Promoting the effective use of existing HSE management tools and techniques on each worksite
Liaison with various regulatory bodies e.g. DPR, FEPA, FMEnv etc
Liaison with clients on project HSE matters.
Participation in the development of HSE Procedures at a corporate level
Promote cashes awareness on site especially in relation to the host communities.

Facilitates all contractor site cashes meetings.
Act as PROJECT HSE focal point on site.
Ensure PTW Systems are in place and strictly enforced.
Report on daily basis site cashes development to the Head of HSE TPWF, Shell Nigeria, and Warri.
Ensure emergency drills are conducted in line with HSE Plan.
Ensure the appropriate application of HSE consequence Management.
Monitor access control measures and improve on them.
Monitor Journey Management and improve on them.
Encourage safety innovations among the contractors and participate in site safety presentations and awards.
Ensure contractors plant and equipment are efficiently and safely used, whilst confirming required availability and monitoring demobilizations.
Make sure that construction plant equipment certification is current and inspection and maintenance is carried out in the prescribed manner and that contractors' records are available at site.
Establish emergency procedures and evacuation plans and ensure all personnel are aware of the procedures, plans and emergency assembly points.
Immediately stop any unsafe work practices, which are likely to cause accidents or are injurious to health.
Advise the Craft Superintendents and Craft Supervisors on matters relating to HSES and participate in 'tool box' talks with the site labour.
Attend Contractors HSES toolbox talks and safety meeting. Encourage Contractors safety incentives and Contractor team building.
Ensure all notification, safety signs and barriers advising power on/live systems are provided by the contractors and in place. Ensure contractors carryout tool box talks on electrical safety and Permit to Work requirements.
Ensure all required site PPE is available in good condition and in sufficient quantities for the labour force, and is compliant with the applicable standards and specifications.
Facilitates the periodic review of the HSE status of the site from time to time.
Ensure implementation of contractor Environmental and Health Management Plan is in line with Shell Nigeria Environmental and Health Management Plan (EHMP).
Implement Shell Nigeria Audit Plan on site and also close out issues arising from the Audits.
Enforce the tracking of Unsafe acts/unsafe conditions generated on site and ensure close out.
Investigations of any site incident, near miss, accident and close out of any live hazards.
Conducting Job Hazard Analysis (JHA) on the critical aspect(s) of project(s).
Ensure that NDT is performed in a safe and effective manner in accordance with SHELL NIGERIA and National standards. Ensured all activities under my control are carried out in accordance with SHELL NIGERIA Health and Safety Policies, project HSE Plans and Procedures, and National and International Health, Safety and environmental Standards.

Position: Field & Integrity Engineer: 1997- 2002
Company: Shell Petroleum Development Company (SPDC) Warri Delta State, Nigeria
Department: Production Crew West (PCW).
Duties & Responsibilities:
Mobilization, execution, and monitoring of the contract including HSE aspects and supervision of activities to meet specifications. Review method statements and job procedures. Handle variations and claims.
Condition monitoring and wall thickness survey, reporting the status of flow-station facilities/Piping: vessels, pumps, valves, headers of SPDC flow stations.
Corrosion control job, to ensure that Cathodic protection design and specification as contained in the methods statement were followed.
Ensure that of structures are brushed, painted according to SPDC DEP or specifications. Supervision of Spools changing to ensure that specified procedure and standards are implemented at Forcados Estuary well-head clusters. Ensure that pressure testing was carried out according to specifications.
Carried out alignment checks and commissioning during Installation of Export pumps, valves, headers at North-bank and Yokri flow station SPDC- Southern Swamp.
Flare stacks rehabilitation: Carried out welders' qualification test, review method statements, ensure line sizing/schedule of material used, and hold pre-mobilization meetings to ensure readiness. Re[porting daily on work progress and concern issues

Position: Quality Control Engineer (NYSC) National Service: 1995 -1996
Company: Odutola Tyre-sole And Food Company Ogun state Nigeria.

Duties & Responsibilities:
Failure Analysis of tyre production line facilities to reduce incessant failure;
Daily inspection of machines & lifting devices for failure analysis.
Procurement of damaged parts and ensure they are replaced.
Supervise civil rehabilitation works, Piping, Installation of equipment to ensure quality & compliance.
Design bolts & shafts for fixtures and rollers.
Carry out regular checks procured stored spare parts.
Assist management to appraise contract and procurement.
Scope and supervise high security fencing project.
Assist Project team to maintain schedule and to control cost of production by analyzing causes of failures and making recommendations for repairs and Appraise contracts and recommend the most cost effective.

UNDER GRAUATE EMPLOYMENT HISTORY:
Position: Facility Engineer Assistant (University Training Program) 1992-1993
Company: 7up-Bottling coy. Aba, Abia State Nigeria.
Duties & Responsibilities:
Workshop processes fabrication: Supervision to ensure safe working conditions of turners to fabricate- shafts, bolts, nuts, liners and rollers.
Ensure adequate maintenance procedures on Production line: Changing of electric motors along the production lines and Bottle washing package; Changing of pistons of pneumatic corking unit; Repairs of Bottle guides; Changing of conveyor chains & belts and agitators.
Ensure safety and adequate procedures according to manufactures specifications during Utility repairs: Overhauling and servicing of water treatment plant, replacement of Carbon filter systems; Overhauling of Carbon IV oxide producing plant; Changing pistons and rings of CO2 compressor, and Air compressor. Changing of spark electrode of Water Boilers; supervising change of submersible pump.
Ensure safety and adequate procedures according to manufactures specifications in Vehicle workshop: Supervising activities of Dismantling of petrol and diesel engines to ratify various vehicle faults. Supervise Testing various parts and components including fluid transmission systems.
Draft Maintenance schedule for operational vehicles and proper documentation of various transmitters document like purchase orders, invoice, and so on.
Giving toolbox talk and guiding on personnel protective equipment to avoid accidents.

HOBBIES:
Reading, Writing, Running, Swimming, Scrabble, Traveling, Football Playing.

REFEREES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4951 to 5000 of 6411)

Go to Search Parameters...

Brief Description

fresher female engineering graduate having resident visa in qatar

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Looking for Instrumentation and controls job

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Highly Skilled Civil Engineer

Having more then Six years of experience in operating and controlling trouble shooting of high-pressure Oil and Gas plants .

Training/HR Professional, Accredited Vocational Assessor with experience in the areas of Performance Consultancy, Personnel Development, Recruitment, Competence Based (NVQ) Training Systems and Certification, Training Needs Analysis and Evaluation within Oil/Gas, Nuclear, Defense and Railway Industr

manager/worhop/service/electrical

Instrument Engineer

Senior management professional with extensive experience in Management & Operations of IT & Telecom Networked Infrastructure and Systems, Managed Services, Information Security, Process Modeling, SAP Implementation, Consultancy etc across industry segments.

Division Order Analyst, Lease Analyst, Land Analyst

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

MWD/LWD Field Service Engineer (4 yrs), Drill Bits Evaluation & Sales Engineer (2 yrs)

I have been working as an Instrument Technician for 4 years in an Oil/Gas company.

Mud Engineer looking for work.

HSE/Safety construction professional in the oil and gas sector-15+ years experience with major clients on construction of LNG, pipelines, GPP, marine, jetties, tanks, buildings, fabrication shops, shipyards.

More than 10 years of post graduate experience in project, safety, inspection, designing engineering & management in the oil & gas industries. Skilled in offshore, onshore & land engineerin. Proficient in excel, MS word, Premavere, introduction to AutoCAD. B.Eng in mechanical engineering.

I am working as welding inspector in oceanreeng ois project Ras Gas. And befor date of 28 april 2007 working with EIL project Burj Dubai Development & GRAVITY BASE STRUCTER IN DUBAI DRY DOCKS.

testing, commissioning, construction and maintenance

Hard working, Project Planning and Leadership ability, communication and Analitycal skill, problem solving and interpretation skill, strong negotiation ability Person

BGAS Certified Painting Inspector Grade -2 & Civil Eng. Diploma Holder working as Painting/Civil Inspector, with more than 18 years Exp. in the Engineering/ Construction Oil & Gas field & Industrial construction. My principle activities are Quality Controlling 'Inspection monitoring & Supervision

Amos RAST Database builder, PMS Engineer, Marine Engineer Liscensed, Support, Maintenance, Planning

Word packaging

HVAC as per ASHRAE,knowledge in PIPING

10 years experience in oil and gas projects including contract review during bid stage, negotiate terms and conditions of Contract, prepare, negotiate and finalize of sub-contract terms and conditions, contractual correspondence, preparation of change orders, preparation of delay, contract claims

Mechanical Engineer, technical support

Internship/Work Experience Chemical Process Engineering

Petroleum Engineer, 4 years industry experience in Logging, reservoir and drilling fluids.

Programming VB6, ASP,COBOL,Oracle,MS SQL server,MS Access, Lotus Notes R5,

Senior Process Operator

Well site supervisor with southeastern New Mexico/West Texas drilling experience. Experienced with PDC bits, High pressure, Drilling with brine and weighted mud, Lost circulation/ seepage issues, Have current well control card. I am a safety leader and apply my knowledge to every task.

Sales, Engineering Project Manager

3 Years experience in Petrochemical industry, B Sc. (Eng), API 510 Inspector

Electrical Engineer with 16 years experience in the field of Electrical & Instrumentation. Engineering and Project Management

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

I am Mechanical engineering graduate with 18 years of experience with the Project Management & execution, Procurement & Contract Management. Executed Tendering, Commercial Evaluation, Negotiation, and Contract Administration for mega projects in Hydrocarbon and Oil & Gas sector. Involved in Concept

I have 25+ years experience in the Instrumentation/Electrical field in construstion and maintenance

Masters in Materials Processing & Engineering ,B.Sc. Chemical engineering ,Metals Testing (Destructive and NDT), Metallography, Heat Treatment Techniques, Structure investigation, Failure analysis, Technical report writing

have skill in 6g pipe 6-sch-80 SMAW and gas pipe insulation level 1.

Graduate in chemical engineering having 11 years of expereince in Projects and Production.In depth knowledge in Sulphuric and Phosphoric acid technology for production and implementation of projects.Having overseas experience for handling project activities.

I am searching for job of Oil worker

HSE Supervisor

A versatile, adaptable and confident person who has gathered a range of knowledge and skills through practical experience in a range of different sorts of jobs.

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Skilled in Training motivating Engineers and Technicians, Experience in Man and Material Management, Experience in direct customer service, purchasing and order expediting, and negotiating with vendors; organise all aspects of business ownership including general accounting, and invoicing.

Electrical Engineer with wireless, optical and integration expertise

Electrical Engineer with previous hands-on experience in electrical and mechanical equipment maintenance

Applying for the post of safety officer in your esteemed concern

I am I.T.I Diesel mechanic with some knowledge of computer. Want to join industry as a trainee for good future

Mechanical/Manufacturing Engineering, Project/Program Management, Supply Chain Management

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 [ 100 ] Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out