Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #74938
next resume »»
CONTACT INFORMATION:
Work place: Oil Refinery
: 1991 to 2005 Dec at BPCL (Bharat Petroleum
Corporation Limited, Mumbai, India)
: 2006 January Onwards at BAPCO (Bahrain
Petroleum Company, BAHRAIN).
Achievement: DEVELOPMENT OF SOUR NAPHTHA TREATMENT PROCESS AND DESIGN OF THE PLANT.(PATENT APPROVED BY GOVERNMENT OF INDIA)
Work skills and experience:
1991-1997(6 years) BHARAT PETROLEUM CORPORATION LIMITED, MUMBAI, INDIA
Position: shift supervisor & Senior Shift supervisor of Fluidized Catalytic Cracking & Gas concentration Complex Operations.
FCCU Complex comprises of Reaction Section, Gas Compression, Gas concentration, Gasoline Treatment, LPG treatment, Refinery Gas Treatment with Amine, Amine regeneration unit, sour water stripping unit & sulphur recovery units.
Responsibilities:
1. Smooth and safe DCS operation of all the units.
2. Guidance to the DCS operators during plant emergencies/up sets/start ups/shut downs.
3. Trouble shooting the problems.
4. Ensuring the quality of Amine solvent and caustic.
5. Adherence to safety, health and environment standards.
6. Identification of the training needs of the shift crew.
7. On job training of the shift crew.
8. Handling of the emergencies and carrying out the safe start up/shut downs.
9. Participation in MOC and Hazop Meetings.
10. Procedures preparation.
10. Adherence to safe turnaround management.
11. Meeting the production targets of LPG and other products.
12. Control of overtime and ensuring the adherence of operators to the company policies.
13. Good knowledge of DCS operations during startup/shut down and emergencies (HONEY WELL.YOKOGAWA).
1998-2002(4 years) BHARAT PETROLEUM CORPORATION LIMITED, MUMBAI, INDIA
Position: Deputy Manager Commissioning/ and PROCESS of Diesel Hydro treating complex
Diesel Hydro treating complex: It consists of Hydrogen Plant, Diesel treater, Sour gas treatment, amine regeneration unit, Sour water treatment and Sulphur recovery units. Sulphur handling facilities (SANDVIK ROTOFORMER PELLETISER)
Sulphur recovery unit is MCRC Process (maximum CLAUS RECOVERY CONCEPT)
Responsibilities:
1. Incident free commissioning.
2. PFD Checking
3. P&ID Review & Check.
4. Equipment inspection and commissioning procedures review.
5. Selection of operators.
6. Training of operators.
7. Stabilization of the complex.
8. Performance test run of the two stage hydro cracker and sulphur,amine treatment plants.
9. Performance monitoring of the unit.
10. Data collection and coordination with the licensor.
11. Trouble shooting of the problems.
12. Performance guarantee test run with the licensor.
8. Plant monitoring and troubleshooting.
9. MOC Preparation.
10. Participation in Hazop.
2003-2005(2 years) BHARAT PETROLEUM CORPORATION LIMITED, MUMBAI, INDIA
Position: Manager commissioning and process technology of Hydro cracker and LBOP complex and process technology
Hydro cracker Complex consists of hydrogen, two stage hydro cracker,LBOP, gas recovery, gas treatment, LPG treatment, amine regeneration, two sour water strippers and two Sulphur Recovery units.
Responsibilities:
Responsibilities:
1. Incident free commissioning.
2. Equipment inspection and commissioning procedures review along with process licensor CHEVRON.
3. PFD Checking.
4. P&ID Checking
5. Catalyst loading.
6. Presulphiding supervision.
7. Normal operation of the complex.
8. Performance monitoring and trouble shooting.
9. operator recruitment and training.
2006 onwards
Position: OPERATIONS ENGINEER LSDP Complex at BAHRAIN PETROLEUM COMPANY.
LSDP Complex consists of Bahrain Gas (KHUFF) treatment, hydrogen plant, two stage hydro cracker plant, sour gas treatment, Amine Regeneration, sour water treatment and Sulphur Recovery Units with TGTU (tail gas treatment).
Responsibilities:
1. Precommissioning/commissioning of the Hydro cracker unit.
2. Procedures preparing for startup/emergencies/shut downs.
3. Guidance to the DCS control operators during plant upsets emergencies/start ups and shut downs.
4. Meeting the product specifications.
5. Operator training.
6. Adherence to SHE standards
Training:
PRODUCTION MANAGEMENT COURSE AT OSAKA, JAPAN
HYDROCRACKER TRAINING BY CHEVRON
«« previous resume
next resume »»
Search Results (Resumes 251 to 300 of 6412)
Go to Search Parameters...
Brief Description
Significant experiences in analytical and computational modeling in both structural and thermal-fluid areas. Working on offshore engineering design in shallow and deep water, which includes subsea pipeline, riser, and stinger design.
Project engineer with management skills
I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.
Skills : Structural Analysis & Design with help of Engineering Software qualification : Master of Engineering (Civil) Specialisation : Structural Engineering
28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.
Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.
20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.
Management and supervisory skills
I am a Senior Petroleum Engineer Technologist with over 20 years oil and gas experience. My diverse background provides a comprehensive knowledge of all aspects within the petroleum industry.
Civil/Structural Checker with 25 years experience
21 years senior piping CAD designer with PDMS and ...
Departmental development and management of process, staff and workflow integration into corporate operations.
Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.
Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control
I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.
Petroleum Engineer
Process sr engineer
Over 18 years experience in Natural Gas Engineering Field including research, planning, route survey, design, implementation, installation, testing maintenance and supervision of Gas distribution and transmission line to Industrial, commercial and domestic connections under American standards and sp
DSV with over 20 years experience.
I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.
Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning
Senior Pipe Stress Engineer
Maint. and trouble shooting of all kinds of rotating., and static equip.,
Installatation, commissioning , maintenance & repair of all instrument working in petrochemicals plant / gas/ refinery. I also do the EPC PROJECT of Reliance retail outlet .for10 months
Upstream and mid-stream experience(27 years) plus underground waste water injection
Experienced Materials Metallurgical Engineer seeking a position in research and development facility. Has experience with fuel cells technologies, fuel reforming materials and processes, automotive industry, hydrogen related technologies, engine mechanical design.
I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.
I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.
Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.
Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.
Anchor Handling, Rig Moves, Tanker-lifting, operations both on DP and manually
Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.
Telecom field technicians Customer end
QA / QC Engineer - Painting / Coating / Insulation / Refractory / Fire-proofing
Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.
Free!
I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery
Two years post apprenticeship training as a Welding Engineer, under the supervision of the senior welding engineer, working on the manufacture of overland pipelines, pressure vessels, nuclear pressure vessels, heat exchangers and various projects for the Middle East and Libya.
Totally 25 years experience in execution of Electrical Maintenance works in 210MW, 150MW, 120MW and 20MW Generators, Transformers, Breakers, Motors, UPS, MOV, EOT Cranes, HVAC, Lightings, Protection Relays Testing, electrical equipments and PLC, DCS, SCADA, WinCC, S5, S7 hardware
Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.
Bachler in Arts + 3 yeart Appranticship in Instrumentation and control
having 18 years of sound experience in Commissioning and design, with Bachelor degree
unigraphics designer drafter
Interested in jobs in Saudi Arabia only. Although, I specialize in biomedical sensors and microelectronics, willing to try out other areas of Eng.. I have more than 15 years industrial experience in diverse engineering disciplines.
I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.
Safety/HSE Manager
20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)
25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.
22 years of aircraft maintenance related experiences with the United States Air Force
Currently working for Raslanuf oil and Gas Company (RASCO) as Senior Process engineer, Working within Technical services department Process engineering Division.
Reservoir, simukation and production engineer
First
1
2
3
4
5
[ 6 ]
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com