Resume - Almost 18yrs experience in oil & gas company (CAD/INtools Administrator

Misco Jobs

Resume #74998

CONTACT INFORMATION:
View contact information...

EDUCATION AND QUALIFICATIONS: Bachelor of Science in Electronics and Communications Engineering
PROFESSIONAL AFFILIATIONS: Nil
NATIONALITY: Filipino
DATE OF BIRTH: 15 January 1966

KEY EXPERIENCE

Eighteen (18) years working experience in multi-discipline Computer Aided Design Draughting, customization & development.
Eighteen (18) years working experience in IT Support
Eight (8) years working experience as Document Controller
Eight (8) years working experience in Intools System & Project Administration.
Six (6) years working experience as QA/QC Assistant
Engineering software specialist
Application software trainer
IT support / helpdesk.
AREAS OF PARTICULAR EXPERTISE
* Document Controller
* INtools
* Software & Hardware Support
* AutoLISP Programming
* AutoCAD
* Software Trainer/Specialist

PROFESSIONAL EXPERIENCE
November 1996 – Present
Damit Worley Engineering Sdn Bhd, Brunei

CAD Administrator / IT Support/ Document Controller
Reporting to Project Services Manager
Responsibilities:
CAD COORDINATOR:
* Controller of both CAD & Manual Drawings including documents that are included in the project package
* Custodian of the CAD drafting procedure sees to it that all CAD user workstation are set as per the standard procedure.
* Oversee the maintenance and administration of AutoCAD Program.
* Develops Autolisp routines to speed up CAD draughting & produce quality drawings.
* Estimate man-hours needed to produce drawings and to complete documentations
* Customize blocks, symbols & menus as per client requirements.
* Custodian of all electronic drawings.
* Multi-discipline draftsperson

IT SUPPORT / TRAINER
* Stand-in IT Support/Helpdesk
* Initiates & conducts training to staffs both new and current user. This is done regularly to upgrade their skills using AutoCAD & other application softwares.
* SAP focal point

DOCUMENT CONTROLLER
* Create procedures & guidelines that impact document control specially drawing control.
* Archive Project drawings both manual & CAD.
* Focal point for all drawing requests to clients
* Updates Engineering Drawings both Manual & CAD data/records received from clients & vendors.
* Maintains an up-to-date computerized drawing system for registering, storage, retrieval, distribution & tracking of CAD & Manual Engineering drawings using Damit WorleyParsons Work Management System (WMS).
* Converts CAD & Manual drawings to image formats ie jpeg, bmp, eps, wmf, etc or to pdf format by either scanning or printing.

QA/QC ASSISTANT
* Assists Planning Manager in project progress & activities specially in Supervising CAD Trainees
* Conducts QA/QC Induction to new staffs
* Maintain & implement the Project Quality Plan in conjunction with the Project Services Manager
* Develop and implement project specific procedures, work instruction and forms in conjunction with the project line management and the Project Services Manager.
* Provide training support to the project team

INtools Administrator
Reporting to Lead Instrument Engineer with full responsibility for providing INtools support to all users.
Responsibilities:
System Administrator/Instrument Designer
General
* Creating a Domain
* Domain Definitions
* Defining Departments
* Defining User Profiles
* Assigning a Domain Administrator
* Accounting, Contractors, and Clients
* Setting History Options
* Activity Tracking Management
* Deleting a Domain
Database Management
* Maintaining the INtools Database on MS-SQL Server
* Maintaining the INtools Database on Oracle
* Resizing Oracle Tablespaces
* Optimizing Oracle Indexes
* Updating Statistics on Oracle
Miscellaneous
* Importing Interface Languages
* Enabling Workflow
* Report Generation (System Administrator)

Project Administrator

Initial Plant Design and Construction
* Defining Owner Profiles
* Setting up the Plant-Area-Unit Hierarchy
* Creating a Group Profile
* Assigning Users to a Group
* Granting Access Rights
* Defining Naming Conventions
Plant Modernization
* Creating an Engineering Project
* Defining the Scope of an Engineering Project
* Comparing Engineering Project Data
* Merging Engineering Project and AsBuilt Data
Others
* Working with User-Defined Fields
* Selecting the Logo
* Modifying Notes
* Working with Add-Ons
* Report Generation (Project Administrator)
* Clearing INtools Sessions (for multi-user versions)

September 1993 - August 1995
Komputer Wisman (Sdn) Bhd

Training Specialist/CAD Support
Conducted series of AutoCAD courses for PTR/11, Mechanical Training Department of Brunei Shell Petroleum Sdn Bhd and other private and government Engineering and Architectural consulting firms.
Rendered training on end-user softwares like Intro to Windows, Word, Power Point, Excel, Project Scheduler 6, Intro to PC, etc. to the staffs of various department of Brunei Shell Co Sdn Bhd, Sarawak Shell Sdn Bhd, Ministry of Development, JKR and other private companies.
Responsible for the development of courses to be conducted. This includes designing the course outline and course contents to produce set of course notes and training materials to be used.

January 1990 - August 1993
Access Institute of Computer Technology

Instructor / Trainer / Registrar
Perform administrative functions such as monitoring course schedules and supervise apprenticeship program of the company, monitors the improvement of trainees.
* Conduct training of end-user softwares and AutoCAD courses.
* Perform cadding drawings of different discipline for private companies.

February 1993 - July 1993
Westor Information System

CAD Engineer (Electrical)
The company specialises in cadding manually drawn engineering designs. My area of responsibility is to convert drawings of any discipline to AutoCAD drawing format or to Intergraph (Microstation) dgn format. When the drawings are converted it will then imported to EPLAN which is an Electrical Planing Software.

September 1992 - February 1993
Maclin Electronics Company

Programmer
Main responsibility is to prepare 2D drafts of plastic designs using AutoCAD and then import to MasterCAM to produce 3D drawings or models. The 3D drawing or model will be used to generate the tool path to produce prototype of the plastic mold design.
Software used: MasterCAM
* Creates tool paths of the mold design and link it to the Numeric Control Machine.

EDUCATIONAL BACKGROUND

Bachelor of Science in Electronics & Communications Engineering
Saint Louis University
Baguio City, Philippines

AutoCAD Course
ACCESS Computer Schools
Manila, Philippines
TRAINING AND COURSES ATTENDED

SAP (Material Tracking/Search)
BSP, Brunei

Intergraph, Singapore
User INtools Training

Intergraph, Singapore
Advanced INtools Training

Access Computer Schools, Philippines
AutoCAD
ENGINEERING SOFTWARES OPERATED
AutoCAD
MasterCAM
Microstation
Intools
AutoPlant
Mech-Q

Proficient in using the following softwares:
Microsoft Word
Microsoft Excel
Microsoft Power Point
Microsoft Project
Microsoft Access
Suretrak

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 6412)

Go to Search Parameters...

Brief Description

Reservoir engineer / software engineer. 11 years reservoir engineering; 8 years software engineering in other industries. Keywords: reservoir modeling; simulation; upscaling; production forecasting; reserves estimation; well test analysis; Eclipse; VIP. Availability: immediate.

Senior Civil/Structural in Oil/Gas Field

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

pipeline inspection and tyhird party inspection

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Mechanical and gas (natural) handing skills, repair of "Novopegneon” and “ General Electric” equipment, solid Knowledge of automatic Gas turbine equipment.

Instrument / Controlsystems Engineer

Extensive knowledge in control system design for industrial applications specially with ABB and YOKOGAWA DCS systems ,software design and software programming with C, C++,Visual C# and Visual Basic .

Geologist geophysicist interpretation

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Almost 18yrs experience in oil & gas company (CAD/INtools Administrator

A highly focused, enthusiastic and innovative Petrophysicist, with almost 18 years practical work experience in the Oil & Gas industry, both with a major service provider (Schlumberger) and major Oil & Gas producing companies (Qatar Petroleum, Zadco, Rasgas, Shell). Determined and results oriented.

Seventeen years of combined experience of Operation and Technical support to maintenance unit as reliability engineer in safety dominated Nuclear Power Plant. Where safety is the utmost goal beside operation of the plant and production. Extensive experience in reliability centered maintenance

I am a Process Commissioning Engineer having more than 18 years experience in pre-commissioning, commissioning, startup, operations, trouble shooting, performance testing and hand over of oil and gas facilities, refineries, gas to liquid plant and fertilizer plants. I have hands on experience in the

Chief Metallurgist

Multi-Disciplined NDT Technician/Inspector with Rope Access. UT Level 2, MP Level 2, PT Level 2, IRATA Rope Access Level 1. Int Offshore Survival Certification.

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,

process engineer

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

Experienced Completing and Producing Petroleum Engineer

INSTRUMENT FIELD ENGINEER

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Senior Corrosion Engineer with 14 years experience at metallurgy fields especialy corrosion & corrosion control. expert at painting, insulations,cathodic protection, materials selection, corrosion inhibitors, corrosion monitoring, coatings inspection . I am serious at work.

An astute techno-commercial professional having 13+ years (of 15+ years) diversified experience in grid connected wind energy sector.

Top-notch Instrumentation Technologist and Process control Team Leader of an US based MNC for the Central Engineering Division in Mumbai to meet the requirement of Asia Pacific and Europe who are pioneer in the manufacture of specialty chemicals with over 18 years of notable experience in the field

High level technical knowledge and understanding of execution methodology on engineering aspect. About 5 years in a QA/QC jobs engage in Power Plant Construction under the management of Japanese Firm. Had a background on Piping/Mechanical Designs using Autocad. Advance computer literacy.

As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability

Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,

Highly qualified, and experienced Fully conversant with all aspects of evaluation and testing of drilling mud. Expertise in testing of all the mud parameters

I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.

Control & instrumentation

KEY COMPETENCIES

Gradute chemical engineer

A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

I am very talented and a hard worker. I have a good eye for any type of construction.

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out