Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #75272 next resume »»
CONTACT INFORMATION:
View contact information...

EMPLOYMENT HISTORY

From: April 2007 - August 2008
BLUE EAGLE ENTERPRISES, INC. Drilling Consultant
Drilling supervision of under-balanced, deviated and horizontal drilling programs for three different operators in the areas of WY, N. Dakota, Ark-LA-TX. Wells drilled to +/- 14,000'. Simultaneous operations with Completion department. Also, supervised final location construction for pre-rig move-in.
From:
Sept. 2005 – BLUE EAGLE ENTERPRISES, INC. Drilling, Completion & Construction
April 2007 Consultant in the San Juan County, New Mexico (since October 2007 to present) and Panhandle Drilling and Completion Division (Guymon, OK). Attached to the Houston Office of ConocoPhillips. Working under contract though Producers Assistance Corporation or PAC (Houston, TX). Supervise Drilling, Completion, Workover, and Site Construction and Reclamation in the Panhandle areas of Oklahoma and Texas. Supervise Drilling operations in the SJBU area of ConocoPhillips. I spend a lot of time and energy attempting to keep my operations SAFE and so far in this time period we have not had any LTA's or other accidents on any locations I have supervised for a long time. I'm versed in 'Behavior Based Safety Programs' like "STOP". Safety (human & environmental), logistics, reporting and landowner/regulatory negotiations are all in my repertoire alone with a strong background in Drilling, Air Drilling, Fracturing, Completion and Fluids technology.

June 2004 – BLUE EAGLE ENERPRISES, INC. Drilling and Completion Consultant
Sept. 2005 for Patina (Farmington, NM), Huntington (OKC, OK), and Lance Oil & Gas (Kirtland, NM), Subcontracting through GSM to oversee Drilling, Re-completions, Completions, Hydraulic Fracturing, P&As and Remedial well work on Gas wells in San Juan Basin.
Working with ConocoPhillips in the Panhandle Drilling and Completions Group as a supervisor for Drilling, Completion, Coil Tubing, Location & Road Construction operations and Land Owner negotiations in the Texas and Oklahoma Panhandles. I spend a lot of time and energy attempting to keep my operations SAFE and so far in this time period we have not had any LTA's or other accidents. I'm versed in 'Behavior Based Safety Programs' like "STOP".

Nov. 2002 – San Juan College – Regional Energy Training Center Lead Instructor and Instructional Designer (NM Department of Labor)
July 2004 instructed students from the Oil & Gas Industry in Well Control for Drilling and Completion, H2S Safety Awareness Training (certified) also taught and setup curriculum for other courses of study having to do with the Oil & Gas Industry. Supervised the drilling of the training well and the facilities associated with it. Part of an International Negotiation team during talks with the University of Automation, Halliburton and indirectly with PEMEX in the Ciudad de Carmen, Champeche, Mexico.

May 2001 – BLUE EAGLE ENERPRISES, INC. Project Leader
Nov. 2002 for CONOCO (Farmington, NM), PHILLIPS and other local Operators
Subcontracting through MVCI and other consulting companies to oversee Drilling, Re-completions, Completions, Hydraulic Fracturing, P&As and Remedial well work on Gas wells in San Juan Basin. Consulted to Richardson Operating for field well data and other regulatory services. Set up OSHA safety programs for two small drilling and completion companies in both English and Spanish.

Jan 2000 – Mallon Oil Plant Forman
May 2001 Daily operations, construction projects and personnel management of Amine plant, Salt Water Disposal plant, Ajax Compressors and injection well for produced water and H2S in the East Blanco field (Jicarrilla Indian Reservation).

1993 - 1999 BLUE EAGLE ENTERPRISES, INC. Consultant
Specializing in Drilling, Completion, Directional Supervision, Site Preparation and Reclamation; Regulatory Compliance (Before, During, and After Operations) with BLM, BIA, and Southern Ute Indian Tribal Departments. Engineering of Drilling Mud and Completion Fluids. INLAND and OFFSHORE experience. *See "Additional Information" on Page 3.

1991 to 1993 TYLER DAWSON SUPPLY (Wilson) Outside and Inside Sales
1000 Illinois Avenue and Service
P. O. Box 5790
Farmington, New Mexico 87499
(505) 327-0231

1991 EASTMAN CHRISTENSEN Field Specialist
Rocky Mountain District Directional / Horizontal Driller
7424 West 6WN Road
P. O. Box 453
Casper, Wyoming 82602
(307) 427-0001

1990 to 1991 QUADCO Outside Sales
P. O. Box 5340
Farmington, New Mexico 87499
(505) 327-0486

1980 to 1986 EXXON CO., U.S.A. Senior DrillingTechnician
Eastern Offshore Drilling
Poydras Street
P. O. Box 2350
New Orleans, LA 70176
Supervisors - Clyde Baldwin, T. R Hicks (Retired)
Supervised 35 to 110 drilling contract and service personnel on several different types of drilling rigs. Supervised simultaneous operations in all aspects of safety, drilling and and completion work. Much of my experience was in drilling directional wells. Specialized in Drilling and Completion Fluids.

1979 to 1980 IMCO MUD SERVICES, INC. -Drilling & Completion Fluids Engineer and Field Sales
(No longer in business)
Halliburton Building
Houma Air Base
Houma, Louisiana 70360
Supervisors - Joe Broussard, Tom Davies
Ran drilling and completion fluids on different locations for various operating oil companies. Supervised chemical use and safety on locations. Worked in lab for independent testing of field fluids to trouble-shoot problems.

1979 SANTA FE DRILLING Roughneck, extra training in
Western Division (A. W. Thompson) Hydrogen Sulfide Safety
Odessa, Texas Supervisor - Buck Rushing

* Non-oilfield related employment excluded

EDUCATION

Louisiana State University, Baton Rouge, Louisiana
Major: Business Management

Training Certificates:
WellCap/ IADC Well Control certification completed 2/15/06 for Surface and Subsea
Drlg, Completion, W/O, W/L, C/T, S/T, Snubbing Supervisor level.
WellCap / IADC for Drlg, Completion, W/O, W/L, CT, Snubbing Supervisor
Certification: Certification date: 12/7/03, Exp. date: 12/7/05 (Cert. # A 237319)
H2S Trainer Certification: 3-19-2003 thru 3-19-2004; ETI International, Inc.
40 Hour Train the Trainer Course: completion date:7/18/2003
OSHA Hazard Communication Emergency Procedures, SJC Health & Safety Training
Course completed: 7/18/03
Defensive Driving Course – 8 hours Course Completion: 4/23/04 (Sec. Control # 704989)

TRAINING
* I completed all schools and training courses at the top of the class. Others courses have now been completed.

1997 (June) WELL CONTROL Instructor: Norton Lapeyrouse
RANDY SMITH DRILLING SCHOOLS
BASIC DRLG/COMPLETION/WORKOVER
& WELL SERVICING - SUPERVISOR
Options: Surface/Subsea/Snubbing Coiled Tbg./Small Tbg.

1991 Directional Drilling II Instructor: George Couvillion
Eastman Christensen
Houston, Texas 77032
(713) 442-0800
1985 Effective Supervision Coordinators: Jay Shuck,
Exxon Co., U.S.A. Steve Rose
Houston, Texas
1985 Advanced Mud Lab School (II)
Exxon Co., U. S. A.
Houston, Texas
1985 Offshore Personnel Survival School
Exxon Co., U.S.A.
1980-1986 Sub-Sea Well Control Schools (Approved by Minerals Management Exxon Co., U.S.A. Service of Federal Government)
Houston, Texas *Yearly five-day required school
1982 Industrial Fire Fighting School
Exxon Co., U.S.A.
Grand Isle, Louisiana
1981 Drilling Engineering and Technology School
Exxon Co., U.S.A.
Houston, Texas

1979 to 1980 Imco Drilling Fluid Technology School
Imco Mud Services (A Division of Halliburton)
Houston, Texas

ADDITIONAL DATA

My offshore experience includes (as a rig supervisor and as a mud-engineer) rig-up, rig-down, drilling and completion on platform rigs, submersible rigs, jackup rigs, semi-submersibles, drill ships, and barge rigs in water depths to 2475'. My land experience (as a mud engineer, directional supervisor, drilling supervisor, completion supervisor - sand fracs, N2 foam fracs, slick water fracs, cavitation, etc., and drilling supervisor) in hard rock, on truck-mounted rigs, pulling units, skid-based mounted rigs with stiff legged and jack-knife derricks with mud, air and gas drilling mediums. I have worked from N. Dakota to the West Coast (offshore) and down to the Gulf of Mexico and in Venezuela, S.A. I have also worked in the HPHT areas of South Texas, Anticline area in Wyoming and some other areas. I have horizontal experience in WY, N. Dakota, and the Ark-La-Tx.

I have worked on the development of oilfield reporting and database software. I am experienced in the use of both Well View and Dims/Wims reporting software and have training in Open Well software. I am IADC / WellCap Sub-sea certified in Well Control in Drilling, Completion and Well Servicing for Supervisors. I helped develop and taught a Well Control School that was taught at San Juan College /Regional Energy Training Center in Farmington, New Mexico. I was a team member of a curriculum development group that is working to receive IADC/WellCap certification for a new well control manual and course that is being taught at the RETC. I also have experience in managing small businesses through my own company and I have done management work in other service related businesses owned by others.
I have been involved in this industry for nearly 29 years now and still can't seem to get enough of it. I will say however that I do enjoy the time I can get with my wife (of nearly 30 years) and that we are 'empty nesters' now.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 801 to 850 of 6997)Go to Search Parameters...
Brief Description
Electrical & Instrumentation Inspector - Broad experience in E&I installation in Fabrication of Offshore Production Platform, FPSO, D.P Cable Laying Vessel and Oil & Gas Refinery Plant. (Knowledgeable in industry standard recommended practice: NEC 500, IEC/NEC 505, API RP14C, 14F.
Instrument engineer
To Carried out overhauling, repairing preventive, corrective breakdown, and shutdown mechanical maintenance, trouble shooting, condition monitoring, alignments, hydro testing, of rotating & static equipments, like pumps, compressors, fin fans blowers, heat exchangers, column, and using all type of
My strengths are my ability to take charge and work well within a team environment and in my experience in developing algorithms from concept phase to commercial implementation
Read blue prints, electrical scymatics, troubleshooting and repairing electronic devices for the industrial sector and wireless communications equipment.
Information Management, Data Management and CAD Systems Management
Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspection, testing and documentation for fabrication, installation structure and piping work for offshore Jacket structure and pile make up, process & living quarters offshore platform, FPSO piping process and floating system,
I have experience in all phases of both electrical and petroulem experience.
Nimr'C' Full field water injection project.
10+ years of combined professional experience utilizing geophysical interpretation, seismic processing, single stack and simultaneous deterministic inversion, 3D geo-cellular modeling, software consulting, training, and development skills. Working knowledge of 3D interpretation techniques, etc.
SDE with very good experience in very demanding working environment; person self-motivated, performance driven, team player, with good IT skills. Experience in FSU and Eastern Europe. Bilingual Spanish– English, with basic conversational knowledge of Russian.
Mechanical Engineer & a result oriented professional with qualitative experience of over 13 years in Cost Estimation, Planning & scheduling and Cost Control in the EPCM & EPIC projects of Offshore and Onshore Oil & Gas, Port & LNG Terminal and Petrochemical plants in Nigeria, India and Middle East
Wellsite Geologist
High school and some collge . worked offshore jack up rig and onshore rigs in oman , Dubai , Abu Dhabi, Kuwait and recently work in Saudi Arab
Sr. Petroleum Management Engineer with extensive diverse experience in Light to Heavy Oil, Oil Shale, Tar Sands, Reservoir, Completions, Production, Drilling, Well Completions/Simulations and Facilities Engineering, and in Offshore, Deepwater, SURF (Subsea, Umbilical, Risers, Flowlines), Terminals,
Free! Nearly 30 years of significant, progressive experience directing teams to successful completion in onshore and offshore drilling.
Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project
Started carrier with Operations and later switched over to projects. For the last 17 years employed as a safety professional mainly in the Petroleum/ Petrochemical field. Expert in carrying out Safety audits/ HAZOP studies and QRA.
Over 28 years professional experience IT and SAP SECURITY
Geoscience expertise from progressively increasing career responsibilities. Management expertise from progressively increasing career responsibilities. Please see resume for details.
Masters in automotive engineering
Senior Hydrogeologist
Production Geologist 25+ years experience. Expertise in Field Development, mature field integration, locating additional infill drilling targets.
Over 25 Years of Extensive Oil Industry Experience in Contracts Administration, Purchasing and Materials Controls. Presently working for the last two years as a CONTRACTS ENGINEER with RasGas LNG Company, Qatar. Seeking advancement and higher opportunities.
Over twenty years experience in oil and gas construction industries
Senior Reservoir Engineer
Total 24 years in various capacities in Oil refinery, Gas processing including Gas Cracker&Petrochemicals with Technical services & commissioning background that covers Process Design, Equipment rating, Troubleshooting, Plant change orders management, Capacity enhancement.
SUMMARY Professional Production Geo-Scientist with 24+ years experience in Geological and Geophysical interpretations. Technical expertise in Oil & Gas Field Development & Exploration, with the use of well logs, core descriptions, sequence stratigraphic & seismic stratigraphic concepts.
B.Sc. in Chemical Engineering (Gas and Petrochemical); 19 years experience in process facilities (more than 17 years in oil and gas industry). The summary of major duty is design, optimization, installation and operation of process equipment.
Overall 20 years experience in Design, Engineering, Project Coordination, Project management, Maintenance of Instrumentation, Analyzers & Control Systems of Major/DBN Hydrocarbon(Olefins) and Polymer(PVC/VCM) projects. Upgrades of DCS, PLC, SCADA, GC, Process Gas & Liquid Analyzers, CEMS A
32 years of work experience and present position senior most lead inst. engineer
Petroleum Engineer, twenty-two years experience, strong analytical Reservoir Engineering on implementing exploitation strategies for petroleum and gas reservoirs, and secondary recoveries techniques. Reservoir description and simulation. Reserves Assessment. Performance production evaluation. Econom
17+ yrs. experience in petroleum engineering from onshore/deepwater offshore (large) oil & (multi TCF) gas fields. Delivering reservoir/production engineering solutions for maximizing asset value by boosting production, well potential & technical integrity and improving overall business performance.
Responsible for generating all detailed design drawing & ensure that all designs are in accordance to Company specifications and conforms to local and international drawing Codes and Standards. Gathering information thru site surveying as per job modification stated in the client scope of works.
Total experience of 12 years (7 years PDS Administration, 2 Year AutoPLANT Administration, & 3 Years as Piping Design Engineer)
An experienced result oriented Corrosion/Material Specialist with a professional background comprising 10 years of research, technical and supervisory experience in corrosion, materials, mechanical, chemical and metallurgical engineering especially on corrosion prevention and control in the oil an
DCS, SCADA, INSTRUMENTATION
Senior Structural Engineer with 12 years experience in offshore structural engineering. Able to lead, forecast and allocate structural engineering resources and possesses conceptual to detailed design experiences in brown and green field projects.
Mechanic specialist
I have More than 35 years in the marine, oil and gas related industries,
With 13 years of extensive experience in Engineering and Construction of Multi-Discipline projects such as Oil and Gas – FPSO, jakcets, Top sides, Buoys, Industrial Refineries and Heavy Steel Structures
SENIOR CONTROL SYSTEMS ENGINEER
diploma in electrical engineering
Highly accomplished, pragmatic and methodical engineering professional with a progressive career spanning over 13 years in the field of Telecommunication, Industrial Operation, Maintenance of power network & process machinery, industrial installation & erection.
Instrument Supervisor for 10 years. very good computer Literature( office,MS project,Labview...etc)
To pursue a career in the field of Piping Designer (Cadworx-3d modeling) with an emphasis on basic and Detailed Engineering.
Experience/Knowledge in: Classification Survey Statutory Survey Ship Operation/Management/Audit Shipbuilding Ship Repair/Modification Ship Design (Computer Aided-2D & 3D, Structural & Mechanical) Quality/Safety Management & Certification International Standards Project Management Teaching/Training
Intelligent pigging engineer - 13 years of oil and gas experience - Worldwide
20 Years Total Experience In Drilling As Drilling Engineer/ Drilling Supervisor/Well Planning, Well Control, IWCF Supervisor Passed
Drilling, Completion, Fluids Engineering, Directional Drlg Supervisor/Consultant
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   [ 17 ]   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com