Resume - Has served as Supervisor (Mechanical) during shutdown in KNPC, Kuwait and FERTIL...

Misco Jobs

Resume #7559

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To be an efficient maintenance personality in the field of process industry constantly striving for quality maintenance at lower cost strictly adhering the safety & health regulations.

TECHNICAL QUALIFICATION
DIPLOMA IN MECHANICAL ENGINEERING (81.5% of marks) from the Board of State Technical Education, Tamilnadu obtained in June 1981

EXPERIENCE
18 years in the Plant Mechanical Maintenance of Process Industry, M/s Southern Petrochemical Industries Corporation (SPIC) Limited, Tuticorin. Self is presently serving as SENIOR TECHNICIAN (MECHANICAL) in the Mechanical Maintenance of Ammonia Plant, Captive Power Plant, Auxiliary Boilers and Ammonia & LPG Storage Terminals & Unloading Facilities.

OVERSEAS ASSIGNMENTS
Served as Supervisor (Mechanical Maintenance) in Mina Abdulla Refinery of Kuwait National Petroleum Company, Kuwait during Shutdowns of Crude Oil Unit and Coker Unit through GULF-SPIC contract and was authorized to receive all kinds of work permits.

Served as Supervisor (Mechanical Maintenance) at Ruwais Fertilizer Industries (FERTIL), Ruwais, Abu Dhabi for TurnAround maintenance of Ammonia and Urea plants under EMCO, Abu Dhabi and was authorized to receive all kinds of work permits.

OFF-SHORE ASSIGNMENTS (through SPIC-SMO)
Leader of a team of technicians and helpers for overhauling of two high pressure natural gas service Reciprocating Compressors of M/s Mitsui, Japan make at Bassein-A Gas Field of (BP-A) ONGC, Mumbai. The job was completed successfully ahead of schedule including trial run.
Leader of a team of technicians & helpers for overhauling of four high pressure condensate service Plunger Pumps of M/s Peroni, Italy make at Bassein-B Gas Field of (BP-B) ONGC, Mumbai.
Self is a SAFETY PASSPORT holder issued by ONGC for BP-A and BP-B platforms.

COMMISSIONING ASSIGNMENTS
Self was deputed through SPIC-SMO during 1988 for a period of six months for the commissioning and maintenance activities of Condensate Fractionation Unit and Condensate Polishing Unit of Oil and Natural Gas Corporation (ONGC) project at Hazira, Surat.
Self was in the commissioning crew for the erection and commissioning of LPG Storage Terminal of 8500 MT Capacity and the related loading bays (for road tankers) and unloading arm (from ships) at Tuticorin Harbour.

M/s SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LIMITED
It is a Petrochemical Complex in Southern part of India producing 1100 TPD of Ammonia, 1600 TPD of Urea and 1500 TPD of Di-Ammonium Phosphate (DAP). This complex also consists of Process Plants like Utilities with Captive Power Plant of 18 MW capacity, Sulphuric Acid, Phosphoric Acid and Aluminium Fluoride Plants. Storage handling facility for Imported Ammonia (10,000 MT) and Imported LPG (8500 MT) are maintained by SPIC near Tuticorin Harbour.

Self had the opportunity of working in the following plants.
Ammonia Plant - 1100 TPD
Urea Plant - 1600 TPD
Captive Power Plant - 18 MW
High Pressure Boilers - 1 x 120 TPH @ 106 ksc and 482oC
2 x 90 TPH @ 106 ksc and 482oC
2 x 60 TPH @ 45 ksc and 382oC
Ammonia Importation Terminal - 10, 000 MT with Marine Unloading Arm
LPG Storage Terminal - 8, 500 MT with Marine Unloading Arm
Valve Section - with 3 hydro test pumps, 2 test benches and 2 lapping machines

POSITIONS HELD in M/s SPIC
Name of the Organization Designation Period
M/s Southern Petrochemical Senior Technician (Mechanical) Since Jul 1989 Industries Corporation (SPIC)
Limited, Tuticorin Technician (Mechanical) Jul¡¦85 to Jun¡¥89
Maintenance Trainee Jan¡¦84 to Jun¡¥85

HANDS ON MAINTENANCE EXPERIENCE
1. Carrying out mechanical maintenance activities, viz., routine running maintenance, preventive and predictive maintenance of plant machinery and equipments and strive for efficient & safe completion of the activities within the time schedule ensuring good house-keeping.
2. Overhauling and trouble shooting of rotary & reciprocating machinery -
„« Pumps (David Brown, Dresser Rand, Ebara, Worthington, Torishima, Kirloskar)
„« Steam Turbines (Hitachi, Westing House, Coppus, KKK)
„« Reciprocating Compressors (Besimer Cooper, Peter Brotherhood, Bryan Donkin)
„« Centrifugal Compressors (Hitachi Pignone, Dresser Rand)
„« Reciprocating Pumps (Peroni)
„« Fans and Blowers
„« Gearboxes of various types (including for high speed machinery)
3. Maintenance of high pressure boilers, fired heaters, reformers, columns, towers, pressure vessels, storage tanks, piping, valves and auxiliaries.
4. Testing and assuring quality of heat exchangers and fin-fan coolers and replacement of the same as and when required.
5. Servicing of various safety & relief valves and natural floating (on-line popping & reseating pressure setting) of the safety valves of high-pressure boilers. Renewal of Reciprocating Compressor Cylinder Liners.
6. Evaluation of materials (spares, tools & tackles) and manpower requirement for scheduled and unprecedented specific maintenance activities.
7. Development of Preventive Maintenance Schedules for the equipments in-line with OEM's recommendation and follow up.
8. Spares procurement planning for the efficient running of plant defining the optimum inventory & reorder levels and ensuring availability of spares.
9. Periodical reporting on regular maintenance activities and preparation of special reports on specific maintenance activities with diagnostic & failure analysis.

PLANNING EXPERIENCE
1. Scheduling maintenance activities for major overhauling work.
2. Self has fair knowledge on Codes & standards like API, ANSI, and ASME & ASTM.
3. Self was involved in the development of Mechanical Maintenance Procedure Manual for ISO 9002 certification of the organization.
4. Experienced on the operation of Computer Aided Material Management System and Computer Aided Maintenance Management System and coordination with other service departments using these systems.
5. Self has good knowledge on Windows based Microsoft softwares like, Word, Excel, PowerPoint, Outlook Express, Projects, etc. and has prepared many PowerPoint Presentation Slides Shows.

SHUTDOWN EXPERIENCE
1. Pre-Shutdown Planning - preparation of schedules, Tools & Tackles, materials (including spares), blinds (boiler makers), test fittings & gauges, assessment of manpower requirement, scaffolding requirement, provision of identification tags for repair / replacement, etc. Execution of pre-shutdown overhauling of stand-by machineries/equipments.
2. Shutdown Planning - preparation of daily job list, manpower planning, job's follow up, preparation of Daily Report, updating the Master Schedule & Schedule Charts, attending shutdown review meetings, preparation of daily report, preparation of Actual Schedule, etc.
3. Shutdown Maintenance Activities - execution of maintenance activities as per schedule and daily job list, fixing up the priorities, continuous follow up of jobs, materials arrangement (spares, tools, etc), coordinating with the other service departments for fabrication, machining, etc.
4. Post Shutdown Reporting - preparation of shutdown reports, actual schedule charts & master schedule, delay analysis for the delayed activities, review of spares consumed, failure analysis reports for major failures, etc.

MACHINERY WORKED IN M/s SPIC
„± Process Air Compressor
Make: Hitachi Pignone, Japan
Horizontally Split 2 Casing 4 stages 41 kscG Air

„± Loop Refrigeration Compressor
Make: Hitachi Pignone, Japan
Horizontally Split Single Casing 18.2 kscG Ammonia Vapour

„± Process Air Compressor Drive Turbine
Make: Hitachi Pignone, Japan
12 kscG 7 stages Reteau Impulse Condensing 9550 KW 7875 rpm

„± Loop Refrigeration Compressor Drive Turbine
Make: Hitachi, Japan
45 kscG 6 stages Reteau Impulse Condensing 4500 KW 9000 rpm

„± Boiler Feed Water Pump Drive Turbine
Make: Westinghouse, Canada 45-12 kscG 1750 KW 5000 rpm

„± Semi Lean Solution Pump Drive Turbine
Make: Westinghouse, Canada 45-12 kscG 1380 KW 2970 rpm

„± Lean Solution Pump Drive Turbine
Make: Westinghouse, Canada 45-12 kscG 635 KW 3200 rpm

„± ASGU Boiler Feed Water Pump Drive Turbine
Make: Westinghouse, Canada 45-12 kscG 846 KW 5000 rpm

„± Auxiliary Boiler FD Fan Turbine
Make: KKK, Japan 45-12 kscG 250 KW 980 rpm

„± Other Turbines of Coppus make
1. Process Naphtha Pump Drive Turbine 12-3 ksc 115 KW
2. Fuel Naphtha Pump Turbine 12-3 ksc 30 KW
3. Fuel Oil Pump Turbine 12-3 ksc 30 KW

„± Boiler Feed Water Pump
Make: David Brown 127 ksc Boiler Feed Water 5000 rpm

„± Semi Lean Solution Pump
Make: David Brown 33 ksc G.V. Solution 2970 rpm

„± Lean Solution Pump
Make: David Brown 35 ksc G.V. Solution 3200 rpm

„± Raw Naphtha Pump
Make: David Brown 34 ksc Liquid Naphtha 2960 rpm

„± Cooling Water Pump
Make: Torishima 4.8 ksc Cooling Water 485 rpm

„± CO2 Reciprocating Compressor (Double Acting)
Make: Besimer Cooper, Japan 3 stages 260 ksc Carbon-di-oxide

„± Inert Gas Compressor (Single Acting)
Make: Peter Brotherhood 4 stages 44.5 ksc Nitrogen

„± Hydrogen Gas Compressor (Single Acting)
Make: Peter Brotherhood Single stage 29.5 ksc Hydrogen Gas

„± Storage Refrigeration Compressor (Double Acting)
Make: Bryan Donkin 2 stages 3.5 ksc Vapour Ammonia

SAFETY EXPERIENCE IN M/s SPIC
1. Has served as Coordinator for the plant level and group level Safety Committees and has thorough knowledge on the Safety Permits Systems & HSE Procedures. Self was authorized to receive permits of all classes at KNPC, Kuwait and FERTIL, Abu Dhabi.
2. Has participated in the ¡¥Mock Drills¡¦ conducted by SPIC and ONGC for various emergency conditions and is aware of the Emergency Preparedness Plan.
3. Self is a certified for First Aid by St. John Ambulance Association.
4. Conducting tool box safety talks (pep talks) every week.
5. Coordination with Process & Safety department.

SEMINARS / COURSES ATTENDED IN THE RECENT YEARS
„« The following technical seminars / refresher / training courses attended.
TECHNICAL
„« Bearings (M/s SKF)
„« Mechanical Seals (M/s Dura Seals)
„« Machinery Alignment & Correction (SPIC Training Center)
„« Safety Valves (M/s Bharath Heavy Engineering Limited, Trichy)
„« Developments in Piston & Gas Packing Rings of Reciprocating Compressors (M/s ARECO)

SAFETY & FIRE FIGHTING
„« Refresher on Safety & Fire Fighting (SPIC Training Center)
„« First Aid (St. John Ambulance Association)
„« Safety & Work Permit Course & Examination (Kuwait National Petroleum Company, Kuwait)
„« Safety Refresher & Work Permit Course (FERTIL, Ruwais, Abu Dhabi)

OTHER COURSES
„« Human Relations Enhancement (SPIC Training Center)
„« Total Quality Management (M/s Quality Excellence, Chennai)
„« Has attended a variety of leadership and management training programs through Rotary Clubs, which has helped to enrich organizing capabilities.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2351 to 2400 of 6412)

Go to Search Parameters...

Brief Description

Rotating Equipment Engineer with 5 years experience in Refinery and Oil and Gas jobs

Working knowledge of Allen Bradley PLC-s, turbine, generator and auxiliary equipment including their interfaces to the control system, Foundation Fieldbus network

Piping Design

Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.

Senior technician instrument

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Well-experienced instrument senior technician seeking a motivating position related to Construction, Commissioning and Maintenance applicable to industrial and OIL&GAS installations.

Offering Extensive Experience in Industrial Electrical/Instrument Equipment

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer

28 years experience in drilling fluids onshore and offshore across 4 continents. Fully experienced in both field engineering and office supervisory/management posts. IWCF Combined Surface/Subsea Supervisor well control certificate.

Working experience in Chemical plants with private sector and foreign organizations. Worked at ¡§Honeywell DCS TDC 3000¡¨ controlled Urea & Ammonia plants, FFC and ¡§Foxboro DCS¡¨ controlled Urea plant, Indonesia.

I know I would be the correct candidate because; I have never met a challenge that I could not solve, resolve, or find a solution to in an accurate and timely manner. I am a quality engineer with over 15 years experience in the automotive field alone.

13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

* Over 11 years of experience in areas of Process Automation Engineering & Instrumentation.* Hands-on experience in Automation Engineering, estimation, design, installation & maintenance of equipments in India & Abroad.Expertise in advanced PLC, systems & providing technical support on Instruments.

DEsign Engg., PLC, SCADA, I&C work Experience

Skills include Petroleum Engineering,reservoir Engineering,Petroelum Geoscience,Geochemist,Mud Logging

I have recently completed M. Sc. in Petroleum Technology, from University of Karachi.

Pipe rack design, routing of pipes on rack, Preparation of Tank farm Layout in detail and piping layout for the same from the process point of view. Preparation of detailed piping layout, Equipment layout, General Arrangement drawings, Isometric checking.Isometric drawing preparation

Cogeneration, gas engines

• Results-driven, logical and methodical approach to achieving tasks and objectives

Free! I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

2.6 year of experience in Detailed Engineering work of the refinery units helped me understand the profile and the responsibilities of a mechanical engineer (Static) and to realize how important this field is to the oil refining business and I have learned how important it is to be flexible.

Highly personable Drilling Fluids Engineer with over three years of experience in laboratory work, project supervision, logistic services both air and land logistics and mud engineering.• Proficient with Microsoft Office System (including Microsoft Word, Microsoft Excel, Microsoft PowerPoint®, Micro

Project Planning & Control Engineer / Scheduler / Earned Value System Designing and Development/Primavera Group Software Developer/I have been working in Engineering and Construction phases of EPC oil, gas and petrochemical projects/PMP (Project Management Professional)/Project Planning & Control

Senior Mechanical / Piping / Materials Handling / Pneumatic Design Specialist, Checker, Design Supervisor & Project Manager

A chemical process engineer with 12 years experience in oil refining and petrochemical industries

Has served as Supervisor (Mechanical) during shutdown in KNPC, Kuwait and FERTIL, Abu Dhabi. Has experience in the maintenance of Rotary Machinery like pumps, compressors, turbines, etc. and stationery equipments like heat exchangers, columns, vessels and piping. Has computer knowledge.

Skilled in all planning shutdown, shutdown supervision, servicing, modifications design and total project cost control, mainly in power stations and refineries

Pipeline, Pipe Stress, Piping or MEchanical Engineer

Process Design & Review , Review P & ID’s , Computer Programs (Excel, Word, PowerPoint), Training The Junior Process Engineers & Process Technicians

Over 18 years of experience with reputed international companies with Sadaf , Ibn Zahr , Flour Daniel ,Deutsche Babcock, in important positions like Mechanical Engineer, Principal Engineer, Mechanical Superintendentposition in Engineering, Project and Construction Management.

OBJECTIVE A challenging position in managerial level QUALIFICATION FOR THE JOB Good education and fully experienced with engineering and management duties,, have initiative and willing to accept engineering responsibilities.

: PROJECT ENGINEER //SENIOR ENGINEER /ELECTRICAL -- ENGG./(DESIGNS)/PROC./CONSTRUCTION/SUPN./O & M OIL/GAS/PETROCHEMICAL INDUSTRIES ETC.

cnc turn mill machinist setter

JR. PDS DESIGNER PIPING WORKING FOR WELLCOMPANY IN MUMBAI ON PDS FOR PIPING. GOOD EXPERIANCE OF PIPING.REFER DETAIL BIODATA.

This is the Drafts man C.V for Zueitina Oil Company, Libia.

PROCESS ENGINEERING OF OIL AND GAS PROJECTS

OBJECTIVE To secure a position with a corporation wherein I can apply the skills, knowledge and expertise obtained during my 18 years in the Health & Safety and Emergency Response fields.

I’m a civil engineer with studies in HSEQ, I have worked at Cusiana and Cupiagua Oil and Gas CPFs, I have been working for the past 6 years in HSEQ areas an I´m free to go wherever the job is. I speak Spanish as a mother tongue and have good English skills.

Application for the post of Control & Instrumentation Engineer. post graduate in Instrumentation engineering having more than 9 years of experience in automation Oil & Gas, Petrochemical and Fertilizers projects.

Senior Structural Designer in the Oil and Gas industry with experience of PDMS, Micro station and AutoCAD

• Drilling Engineer - Oil and Gas Drilling Wells Planning; • Rig operations experience; • GPS units, GIS’s methods and procedures; • Manage/coordinate teams of 15+; • Software programming knowledge and experience.

I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.

Setup PDMS, customize PDMS program in PML I and II to greatly reduce man-hours. Piping designer, draftsmen, produce drawings, model pipe support and routed piping systems. Train others on PDMS software.

Process engineer, Sharif Institute of Technology, B.Sc. Degree, Tehran University, Equipment design, Takestan Industrial Systems Company, Well Engineer, Integrated Project Management, Schlumberger Company, Heriot Watt University, Student of Petroleum Engineering, Voluntary work in Indonesia and Iran

Looking for position of Lead Engineer of Rotating equipment in Design, Engineering and Construction organisations.

Total Eight and half years of Engineering, Commissioning and Maintenance experience of DCS/PLC in a petrochemical industry

Discipline leadership and management. Ten years experience in Oil, Gas, and Industrial Instrumentation and Control. Client based engineering experience. Major Projects include FEED, detailed design, construction, testing, commissioning of onshore and offshore facilities. Capital works projects.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 [ 48 ] 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out