Resume - I am PhD in Geotechnical Engineering from Japan.

Misco Jobs

Resume #76396

CONTACT INFORMATION:
View contact information...

GEOTECHNICAL SPECIALIST

EDUCATION
Ph.D. Geotechnical Engineering, The University of Tokyo, Japan. (Oct.2002 - Sep.2005).
(Thesis Title: Effects of Compaction on Strength and Deformation Properties of Gravel in Triaxial and Plane Strain Compression Tests)
M.Sc. Geotechnical Engineering, The University of Tokyo, Japan. (Oct.2000 - Sep.2002).
(Thesis Title: Effects of Compaction on Strength and Deformation Properties of Gravel)
B.Sc. Civil Engineering, University of Engineering and Technology Lahore, Pakistan. (Dec.1996).

PROFESSIONAL MEMBERSHIPS

1- Professional Engineer Australia.
(Qualifications assessed by Engineers Australia as meeting the current academic requirement for standing as Professional Engineer in Australia.)
2- Professional Engineer Pakistan.
3- Member Pakistan Engineering Council.
4- Member International Society for Soil Mechanics and Geotechnical Engineering.
5- Member Pakistan Geotechnical Engineering Society.
6- Member Pakistan Engineering Congress.

EXPERIENCE
MULTI-STORIED BUILDINGS: (Oct.2005 till date)

1- The Centaurus: Islamabad, Pakistan.
First Seven Star Hotel in Pakistan.
* Design of anchoring and shoring system i.e. contiguous piling system for deep excavations.
* Supervision and preparation of report on compression pile load tests.
* Supervision and preparation of report on pile integrity tests.
2- Ali Tower: Lahore, Pakistan.
The tower will consist of nineteen (19) stories including five (5) basements.
* Design of foundation system.
* Design of anchoring and piling system for shoring purpose (Contiguous Piling System).

3-Mabarak Centre: Lahore, Pakistan.
The centre will consist of five towers and its tallest tower will have seventy (70) stories including five (5) basements.
* Design of shoring system for deep excavation.
* Design of compression pile load tests of 3000 tons and 1500 tons for piles of diameter 1500 mm & 1200 mm respectively with detailed instrumentation including vibrating type strain gages, Linear Variable Differential Transducers (LVDTs), extensometers, digital recording and controlloing system and image analysis along with conventional measurement techniques.
* Design of compression pile load test of 1500 tons for a pile of diameter 1200 mm with base grouting in addition to all instrumentation mentioned above.
* Design of lateral pile load test of 160 tons and 100 tons for piles of diameter 1500 mm & 1200 mm respectively with detailed instrumentation like inclinometer, Linear Variable Differential Transducers (LVDTs), digital recording and controlloing system and image analysis along with conventional measurement techniques.
* Pile Dynamic Analysis (PDA) test for 1200 mm diameter pile to develop a coorelation between PDA and compression pile load test.
* Sonic Integrity Tests to check the soundness of concrete.
* Detailed report on pile load tests including interpretation of results and recommendations.

4- Madina Tower: Lahore, Pakistan.
The tower will consist of twenty two (22) stories including four (4) basements.
* Design of foundation system.
* Design of anchoring and piling system for shoring purpose (Contiguous Piling System).

5- Pace Barka Complex: Lahore, Pakistan.
The complex will consist of a five star hotel and commercial buildings. The depth of excavation was about 60 feet.
* Design of anchoring and piling system for shoring purpose (Contiguous Piling System).

6- LDA Plaza: Lahore, Pakistan. (Design Stage)
The tower is planned to have forty five (45) stories including six (6) basements. The excavation depth would be about seventy (70) feet.
* Design of anchoring and piling system for shoring purpose (Contiguous Piling System).

7- Warid Tower: Lahore, Pakistan.
The tower will consist of thirty (30) stories including three (3) basements.
* Design of foundation system.
* Design of anchoring and piling system for shoring purpose (Contiguous Piling System).
8- Tricon Tower: Lahore, Pakistan.
The tower will consist of thirty three (33) stories including three (5) basements.
* Wetting of shoring system design for deep excavation of 60 feet.

INDUSTRIAL STRUCTURES: (Oct.2005 till date)

1- Kohat Cement Company Limited: Kohat, Pakistan.
First Seven Star Hotel in Pakistan.
* Preparation of geotechnical investigation report for the site.
* Supervision and preparation of report on compression pile load tests.
* Design of piling system for the major structures.

2- Fauji Cement Company Limited: Jang Bahtar, Taxila, Pakistan. Construction of 7200 TPD cement plant.
* Design of foundation system for all structures.
* Design and supervision of 1200 Tons pile load tests (11 in Nos).
* Preparation of report on interpretation of tests data.
* Supervision and preparation of interpretation report on Pile Integrity Tests.
* Supervision and preparation of interpretation report on Sonic Coring Tests on Piles.

3- Fatima Fertilizers Company Limited: Sadiqabad, Pakistan.
* Supervision and preparation of interpretation report on Pile Integrity Tests.

4- Engro Fertilizers Company Limited: Dharki, Pakistan.
* Supervision and preparation of interpretation report on Compression Pile Load Tests. (8 in Nos).
5- Total Parco Pakistan Limited: DHA Phase II, Islamabad, Pakistan.
* Preparation of geotechnical investigation report for the site.
* Prepared guidelines for the foundations.

BRIDGE STRUCTURES: (Oct.2005 till date)
1- Datt Bridge: Dera Ghazi Khan, Pakistan.
* Design of anchoring and shoring system i.e. contiguous piling system for deep excavations.
* Supervision and preparation of report on compression pile load tests.

2- Sill River Bridge, Rawalpindi, Pakistan.
* Supervision and preparation of interpretation report on Pile Integrity Tests.

TEACHING/RESEARCH: (Oct.2005 till date)

Associate Professor: University of Engineering and Technology, Lahore, Pakistan.
Courses: Geotechnical Engineering, Pavement Analysis and Design, Soil Dynamics, Soil Improvement Techniques.

PUBLICATIONS

More than 30 publications in well reputed International Journals and Conferences held in USA, Japan, Europe, Canada and Pakistan. (List can be provided if required)

PROFESSIONAL SKILLS

1. Have good command over Microsoft Windows, MS Office tools, Visio and Origin.
2. Have some knowledge of C++, MathCAD, Mat Lab, Fortran77 and BasicN88.
3. Have extensive experience of working on Dipp Motion (professional software) designed for image analysis.
4. Have good command over languages including Urdu, English and Japanese.

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5451 to 5500 of 6412)

Go to Search Parameters...

Brief Description

Oil and Gas Plant Superintendent /On shore or Off shore oil and gas Production Supervisor / Senior Process Technician / Marine Terminal Supervisor with proven technical and analytical strength gained through 31 years of progressive experience in all aspects of Crude Oil & Gas plants operations,

More than fourteen years of professional experience including six years of Saudia as Instrument engineer, Electrical engineer, Superintendent Electrical & instrumentation, Manger plant maintenance and Project Manager in the field of maintenance, construction and technical support services.

Supervises the installation, testing, pre-commissioning, commissioning & operation of Heating, Ventilation & Air Conditioning Systems comprising of Chillers, Heaters, Humidifiers, Air Handling Equipment, HVAC Equipments, Compressors, Cooling Towers, piping and control systems & Ducting work.

To secure a challenging position in Electrical / Instrument Engineer and Project Engineer in Refinery, Oil and Gas facilities and Petrochemical plant so that my professional background, extensive experience and technical abilities will be a valuable asset with in a progressive organization.

Instrument Engineer

Entry level Metallurgical Engineer; B.S. Metallurgical Engineering - University of Missouri-Rolla, EIT. Experienced in failure analysis, physical testing and microscopic evaluation.

Chemical Process Engineer

Laboratory Director, ISO certification and Quality experience, Environmental field, strong analytical background

2002–2004:Lecture Assistant at Fluid Machinery Laboratory, Mechanical Engineering Department ITB; 2003:Internship at PT. PUPUK KALTIM, Bontang, East Kalimantan, Indonesia, with subject: Thermodynamic analysis of CO2 High Pressure Centrifugal Compressor 3021, at KALTIM II Urea Unit Factory

I have completed my diploma in chemical engg and have done be in petroleum engg from mit pune. my project topic is "emulsified acid treatment for carbonate reservoir" which I have completed in ongc Mumbai

I am PhD in Geotechnical Engineering from Japan.

Over twenty years experience in tuning and repairing automated systems, proficient in problem solving and continuous improvement, focus on strategies to improve safety systems performance, resourceful in locating, storing and disseminating knowledge

Mechanical/Piping Designer with Experience in AutoCAD & PDMS

Possess degree in Mechanical Engineering (Hons.),

Project cost control / scheduling

Project Controls / Planning / Scheduler

I am a highly motivated and ambitious Senior Electrical Engineer who worked in Emirate , Saudi Arabia , Kuwait , Iraq & Lebanon since 1994 and interested to pursue my future professional career in your company. The scope of work I am looking for is a job in the field of Residential Industry ,

Over 26 years experience of Gological Explorations for various minerals in Government Sector. Now seeking for an upward change.

40 years in the land surveying profession, 30 years as a Licensed Land Surveyor, Multi-state Licenses

Diploma in mechanical engineer , i am working in mechanical supervisor in kuwait.

Telecommunications Professional Engineer with strong analysis capability, deep knowledge on telecommunications networks and telecom business processes. Outstanding operating, managing and administrative skills. Proficient usage of office utilities and advanced expertise with excel macros.

Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Account Management - International Department

I am a chmeical engineer having 11 years of expreince in diffrent chemicals fields

Painting inspector NACE level 1

Maintenance and Reliability Engineer with experience of 10+ years, working with Metals and mining Industry, Have experience of copper smelter, sulphuric acid plant and Phosphoric acid plant.

I am a geophysicist with a Ph.D. in Applied Science/Applied Physics. I am seeking a job in the oil/gas/mining industry. I have experience with GPR, seismology, computer modeling and C/C++ computer programming. I am a permanent U.S. Resident. I am willing to travel and/or live outside the U.S.

Dear Sir / Madam,

Onshore and offshore electrician. I worked on as a subcontructor with Imtech Marine on the ship Fairstar Fjord; as electrician on the Rig Sea Explorer (pride international); as painter on Rig Galaxy 2 (transocean)

MathCAD; Caesar II; Microsoft Office Applications

Marine Engineer from Greece, Languages: Arabic, English, Greek, Italian. Experience = 16 Y. Eni Oil Co. Ltd.1/6/ 1999. Title Senior Plant technician, skills: Microsoft word, excel, Amos, Internet

Mechanical engineer (4 yrs degree) with appx 15 yrs exp in Contract & Project management. LOOKING FOR CHANGE IN MIDDLE-EAST, CANADA OR INDIA (AVAILABLE FOR IMMEDIATE START)

Geologist with a very good computer literacy

Seeking a Management position where my considerable experience and knowledge of Construction civil estimating and project management that can be fully utilized to help drive employer profit margins and complete contracts on time.

Seeking a position as an Exploration Geologist/ Mining Geologist/Resource Geologist, utilising my past professional experience and educational background

Licensed Professional Geological Consultant

I am a B.E. Chemical with an aggregate of 72.73%. I will be much pleased to work in a competitive environment on challenging assignments that shall yield the twin benefits of the jobsatisfaction and a steady-paced professional growth.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

Computer Skills: Adobe Photoshop, MS Word, MS Excel, MS PowerPoint, MS Outlook, Internet; Programming Language: C; Design Skills: Pro-E2001i2 (Sketcher, Adv. Part Modelling, Surfacing, Assembly, Drafting, Mechanism); ABAQUS (Finite Element Analysis), ADAMS

Petroleum Engineer with Field onshore offshore experience. Experience in field operations and wellsite operations. Working in reservoir management and well testing.

Dear Sir,

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

Excellent PC knowledge and technical assistant experience

I have worked in management positions for over 15 years in both the construction and manufacturing industries. I have had up to 120 employees under my supervision at any given time. HR, production, purchasing, documentation and inventory all under my supervision. Workflow and quality #1 priority.

Metallurgical Engineer

I am an electrical engineer interested in the power field. I had an internship dealing with daily activities of an engineer and I have taken three power related classes.

I have over 20 years International Electrical/Instrumentation/Control Systems Construction and Commissioning Experience as Supervisor, Superintendent, and Managerial positions.

Ph.D. in Geology from IIT kharagpur, M.Tech.in Geology from IIT Roorkee, India

CSWIP 3.1 Welding Inspector, ASNT Level-II in NDT's RT/UT/MT/PT, ISNT Level-II in leak testing methods, Over 7.5 years in QC & Inspection with reputed Indian Multinational

Having 16 years experience in pumping and assescories of Pipe line, Motors, Engines, System study, Trouble shooting etc. Having abroad experince. Visited Lao PDR, Thailand, Srilanka. Handled Project works at varoius sites in India and in Abroad.

First Prev 101 102 103 104 105 106 107 108 109 [ 110 ] 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out