Resume - 8 years' experience in petroleum refining; process modeling; profitability studi...

Misco Jobs

Resume #76639

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Chemical Process Engineer

HIGHLIGHTS OF QUALIFICATIONS

- Master of Science Degree in Chemical Engineering
- petroleum refining technology (Crude Oil Distillation, C5/C6 Isomerization, Alkylation, Naphtha Hydrotreating, Jet and Diesel Hydrotreating, Catalytic Naphtha Reforming, Fluid Catalytic Cracking, Hydrocracking, Steam Cracking)
- refinery production planning using linear programming model
- refinery process modeling and optimization
- knowledgeable in software such as: PIMS, Petro-SIM, PetroFine, RefSys, Hysys, CrudeManager, Spyro, OSI ProcessBook, OSI DataLink, Microsoft Office
- language skills: English, Polish, Hindi, Russian
- problem solving skills
- communication skills

SELECTED ACHIEVEMENTS

- Determined using PIMS model economic potentials of selected crude oils for PKN Plock refinery by calculating net operating margins which could be generated by processing them. The rest of the team working on this project supplied me with the assays of crude oils taken into consideration and converted results of simulations into the report and presentation for the management board. All this resulted in PKN Plock refinery starting to process two new brands of crude oil and in the improvement in its net operating margin. (Crude Oil Slate Diversification Project).

- Identified and rectified inaccuracies in several process models supplied to PKN by various external vendors. That enabled me and the other engineers to generate simulation results closer to reality and my superiors to make correct decisions based on sound premises.

- Conducted profitability studies of proposed improvements in a number of process units using refinery PIMS model. As a result most of the proposed improvements were found capable of generating a profit and implemented. (Optima Project)

- Generated crude distillation units cases, fluid catalytic cracking unit cases and hydrocracking unit cases to be made into PIMS submodel tables of the respective process units Upgraded PIMS model enabled the Planning Department to develop more accurate production plans and that allowed the company as a whole to improve its profit margin. (Plock Refinery PIMS Model Upgrade Project with AspenTech)

- Set up and calibrated models of crude distillation units, fluid catalytic cracking unit and hydrocracking unit using PetroFine. These process unit models were incorporated into a refinery-wide model which was used to verify feasibility of proposed improvements. (Profit Improvement Program with KBC Process Technology Ltd)

- Strong and effective communicative skills on many occasions allowed me to collect process data such as plant capacities, feed and product quality constraints, raw material consumption, product yields, utility consumption, chemicals and catalyst consumption and intermediate product stream dispositions required for modeling, profit improvement projects and refinery performance benchmarking in a timely and accurate manner.

CAREER SUMMARY

PKN ORLEN SA (www.orlen.pl ), Plock, Poland, 8 years
PKN ORLEN is one of Central Europe's largest refiners of crude oil. It operates 7 refineries. Their total deep processing capacity reaches 31.7 million tonnes per annum.

Chemical Engineer
- conducted feasibility, optimization and profitability studies using the refinery PIMS model
- maintained and upgraded the refinery PIMS model
- kept track of all changes made to the refinery PIMS model
- developed and kept up-to-date the documentation of the refinery PIMS model
- generated crude assay tables in PIMS format using Spyral Crude Manager and ATS
- generated delta-based process submodel tables in PIMS format using PetroSim
- set up and calibrated non-linear models of refinery processes using PetroFine, PetroSim, Spyro
- collected, surveyed and validated refinery product lab data
- monitored crude oil properties
- monitored operation of process units
- planned and coordinated test runs at process units
- created process unit flowsheets using OSI ProcessBook
- identified bottlenecks
- supported continuous improvement
- evaluated chemical process technology
- evaluated process modeling software
- coached less experienced colleagues

Krakow Pharmaceutical Company Polfa, 6 months

Shift Coordinator
- coordinated and supervised the work of a team of operators at the vitamin B production unit

EDUCATION

Master of Arts Degree, South Asian Studies, Jagiellonian University, Krakow, Poland
Master of Science Degree, Chemical Engineering, Krakow University of Technology, Poland

PROFESSIONAL DEVELOPMENT

Linear Programming in Refinery & Supply Planning (Shell Global Solutions)
Intermediate PIMS (AspenTech)
Essential HYSYS (Hyprotech/AspenTech)
PetroFine (KBC Process Technology)
Refinery Modeling using Aspen RefSys (AspenTech)
Petro-SIM trainings (KBC Process Technology): distillation columns, catalytic cracking, hydrocracking, catalytic naphtha reforming, LP vector generation
Spyro Introduction (Pyrotec)
CrudeManager (Spiral)

REFERENCES AVAILABLE UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 7040)

Go to Search Parameters...

Brief Description

Engineering Manager, Project Manager, Engineering Specialist

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

1. Oil and gas EPC experience for four years. 2. Design and engineering of static equipment. 3. 10 plus years' experience in mining industry. 4. Expertise in maintenance of static, rotating and utility systems. 5. Bachelor's degree in Mechanical Engineering and Master's degree in Maintenance Mgmt.

Chief Engineer STCW95 unlimited with Master's Degree. Experience on drillships, AHTS, tugs, etc. Ability to manage all engineering operations on board the drilling vessel to ensure proper operation and maintenance of propulsion machinery, drilling equipment and others whilst at sea and in port.

Project engineering and management, electrical and process engineering, project cost control and schedule, business development, power generation equipment, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design)

A qualified and experienced valves, piping and vessels engineer who is looking to return to mainstream engineering applications ideally as a contractor working overseas. Knowledgeable in the design and manufacturing of pressure vessels and pipework as well as valves/controls used in pressurised

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

Instrument and Control Systems Engineer, WorleyParsons, Qatar

Field operations and producing technology, Workover & Completion, Production Optimization, Water Flooding, Well Test Design and Interpretation, Artifial Lift Design and montoring, Well Planning and Development drilling, Strong software skills

8 year experience in materials, corrosion, thermal insulation and piping for the oil and gas industry, including FPSO’s, Offshore production platforms, Offshore offloading buoys, Onshore plants, LNG terminals.

A result-oriented professional with nearly 14 years experience in Piping Design, Operation & Maintenance, Quality Assurance and Relationship Management. Handled a varie

I am a Chemical Engineer and have a master's in Heavy Crude Oil Refining. i also have a master's in Work Health and Safety. I have extensive experience in Oil Refineries in the Construction and Maintenance of new plants. i am willing to travel.

SEASONED MAINTENANCE AND PROJECT MGMT. PROFESSIONAL

Senior Drilling Engineer

8 years' experience in petroleum refining; process modeling; profitability studies; production planning; LP (linear programming); PIMS; HYSYS; Petro-SIM; CrudeManager; Spyro; ProcessBook; DataLink; MS Office; M.Sc. in chemical engineering (specialized in petroleum processing)

Workover & completion supervisor

Over 20 years of experience in Plant Operations or Maintenance.

I possess over 15 years’ of experience in Project Management, Instrumentation & Automation, Operations & Maintenance, Installation & Commissioning and Man Management.

Instrumentation Engineer with 12 years experience of Instrumentation & control scope of project engineering and plant maintenance in Oil & gas,petrochemical and chemical industry.

A Design Specialist responsible for managing the setup, standards, training, design-team leadership, and coordination of Intelligent Data-centric CAD work within multiple offices and Engineering disciplines, both domestic and international. P&IDs, Piping, Smartplant, SPPID

Chemical engineer having more than 12 yrs. experience in petochemical in operation and design consultancy.Also having experience in precommissioning and commissionig of petrochemical plants.

Instrument Engineer/Inspector

Business owner, aerospace mechanical engineer, U.S. Navy military veteran.

More than 7 years experienced engineers with a PHD degree in technical construction can conduct strike-calculations and dimensioning of onshore marine constructions for oil and gas production. Skillfully use software like LS-DYNA, MARC, SESAM etc for the structural analysis.

Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.

I am a dedicated professional who understands the importance of retaining accounts. My ability to get the job done, including quickly and accurately diagnosing and troubleshooting technical problems, has solidified the loyalty of numerous clients. I assure you, these factors, as well as the skills i

PDMS piping designer. PDMS modul design, draft, izodraft. Layout drawings and ISO sketch. Expeience in: piping design for power plants, Steam turbines, compressor plants, support design for chemical industry and refinery

I am actually working on behalf of ExxonMobil refinery in France as a system and network engineer. I have a good experience in control systems (PLC and DCs based systems) as well as in SCADA supervisory. You can find enclosed my CV with a brief description of my skills.

Worked as Material Engineer for Saudi Aramco Material Standardization Division for Equipment Spare Parts Cataloguing Project. Proficient in using SAP R/3, MACs, UNIX and ESP4.

Welding Engineer Specialist

Wellhead, X'mas Tree, Valves, Operations

Worked in Gas Dehydration, Well head, Gas Swetling, Utility & Tank Form& LPG Plants

28 YEARS OF EXPERIENCE IN ENGINEERING RELATED DESIGN AND CHECKING OF MAJOR PETROCHEMICAL, NUCLEAR, REFINERY, INDUSTRIAL AND COMMERCIAL FACILITIES UTILIZING AUTOCAD, MICROSTATION, PDS FRAMEWORKS, SMART PLANT REVIEW, TRIFORMA & BENTLEY NAVIGATOR,. WORKED ON A VARIETY OF DOMESTIC AND INTERNATIONAL PROJ

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

I want drilling supervisor/Rig superintendent job

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

Over 12 years experience in oil and gas industry

As drilling fluids engineer, my experience covers a wide range of mud engineering aspect : to control the running of the mud system on the rig accordance with the operator’s requirements and in a safe manner, to ensure there are sufficent quantities of the correct materials to meet these requirement

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Production Completion Engineer

I am Vasu Jajala working in Shell Nig.Ltd. As a Construction Instrument Supervisor. I have 16 years plus of practical experience in the field of Process/Machine Control Instrument of Offshore & Onshore, Petrochemical, Petroleum refinery, Oil/Gas and QATAR LNG industries.

A proactive and analytical Mechanical Engineer with over 12 years experience of Working in a Multinational and Multi cultural work environment in fabrication operations, welding processes, project management, quality / process enhancement ,maintenance with highly regarded organizations.

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

Sr. Piping Designer - CadWorx/AutoPlant

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out