Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #77171 next resume »» CONTACT INFORMATION: View contact information... ACADEMIC QUALIFICATIONS AND APPROVALS: AINDT Accreditation Level 2 (EN 473) Certificate For ultrasonic testing, Date Of Issue: 01-04-04; Registration No: 2208 Internal Phased Array training carried out by Quadsonics 120 hours Radiation Safety Licences held for: Radioactive Substances Irradiating Apparatus In,QLD as Radiation Safety Officer Accreditation Certificate: (Licence No: 805739-5556713A) QLD Health Department Assessing Industrial Radiography Equipment for Compliance with the Standards Central QLD University: Radiation Safety Course Dangerous Goods Course: (Certificate No: -2000923) CASA Approval: SERDG 33/00 (Course Class 7) ASNT Level 2 Ultrasonics CW Pope ASNT Level 3 Radiography, Magnetic Particle and Dye Penetrant CW Pope 2006- 2008 Quadsonics Pty Ltd Position held: AIS Technician / Supervisor Carried out and managed advanced inspection activities throughout Australia, Asia. Thailand and Kazakhstan. The following covers experience over this period: * Phased Array inspection of new pipework to ASME code case 2235.9 * Phased Array inspection of new pipewelds to AS4041 iun the power industry * Phased Array inspection of welds to AS4037 in the vessel fabrication industry * Phased Array of in service weldments in refineries and power stations * Inspection of new boiler tube welds using Phased Array technology * ToFD and PA combination inspection in refineries, tank farms and power stations * Training new technicians in the use of Phased Array and ToFD * Phased Array inspection of welds to AS4037 on stage 2 of the the Comalco Alumina refinery project for Bechtel 9 months (in excess of 3000 welds tested) 2006- BHP Billiton Position held: NDT Technician Duties:- Contracted to carry out inspections of pressure parts and components. 2006- Intico (Darwin NT) Position held: NDT Technician/ Consultant Duties:- Contracted to Intico to audit systems and train technicians. 2006- Diamond off Shore (Karatha WA) Position held: NDT Technician Duties:- Contracted to Diamond to carry out inspections of pressure parts and drill rig components aboard the Ocean Bounty drill rig. 2006- CS Energy Position held: NDT Coordinator/Technician Duties:- Sub contracted to CS Energy to provide NDT and QA services during power plant shutdowns 2006- NSS (Neftesroi Service LTD) Position held: Project Manager Duties:- Employed by Neftesroi Service LTD/ PFD in Asia to co-ordinate the initial setup for Nucleonic sources and devices for plant use. 2005- CHEVRON OIL Position held: Ultrasonic Technician/TOFD Technician Duties:- Employed by Parsons Fluor Daniels of Asia in Kazakhstan to carry out ultrasonic inspection of 20mm to 62mm butt welds on the Sour Injection Gas plant. 2004 STORK – COOPERHEAT Position held: Area Supervisor Duties:- Employed by Stork- Cooperheat of Australia Pty Ltd in Gladstone Queensland to operate a small regional NDT branch. Some of the projects completed during this time are: * ToFD of in service pressure vessel welds at various sites throughout Australia * Elgas Victoria – critical defect sizing utilising the ToFD technique and visual inspection of tanks * NAP upgrade for Orica in Gladstone involving Radiography, ultrasonics and surface methods * Site coordinator for CS Energy power plant shutdowns. 2002 STORK - COOPERHEAT -2004 Position held: ToFD Operator Duties:- Employed by Stork- Cooperheat of Australia Pty Ltd to carry out Time of Flight / Automated Ultrasonics on the Comalco refinery project Duties included ToFD inspection of pipe welds to ASME code case 2235. Sizes inspected ranged from 150mm diameter 10.97mm wall thickness up to 500mm diameter 26.19mm wall thickness. I inspected in excess of 2500 butt welds utilizing the ToFD technique combined with Pulse Echo. The system utilized was Technology design eight channel coupled to a magman 8 scanner. Manual ultrasonic inspection of close out welds and longitudinal seam weld in fittings as well as surface methods was also completed as part of my workload on this project. I also fulfilled a role of QA/QC for the client. 1998 - 2002 CCI POPE Position held: Technician/Manager Duties:- Employed by CCI - Pope Commenced employment with CCi Pope as a senior technician where I completed Popes in House ASNT certification program gaining L3 in RT,MTand PT and L2 in UT. L1 ToFD course was also completed during this training. Projects completed during this time included the following: * ToFD inspection of 100% of all welds to API 650 for CBI's Orica import terminal tank project. This included a proficiency qualification conducted by CBI QA from the USA and resulted in a total of 5000 Metres of weld of thickness ranges 14mm-60mm. * Moura mine pressure vessel inspections * Orica - pressure vessel inspections under the guidance of Russell Lumb services Australia * Millmerran power station construction * Callide "C" power station construction * Corrosion mapping using the TD scan equipment on ship ballast lines * Project manager oil-shale project Gladstone I further progressed to management and spent a year and a half as branch manager in Gladstone 1992-1998 Queensland Alumina Position held: Quality Control Inspector Duties:- Responsible for incoming goods control and all aspects of NDT including ultrasonics and surface method inspection of pipe welds, vessels and tankage 1982 - 1992 EVANS DEAKIN ENGINEERS Position held: NDT Technician Duties:- All aspects of NDT including weld inspection utilizing Radiography and Ultrasonics, Thickness testing and surface methods on Pipes, Vessels, Tanks and Structural fabrications. View contact information... «« previous resume next resume »» Search Results (Resumes 751 to 800 of 6997) Go to Search Parameters... Brief Description „Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion Chemical Engineer, P.E. Petrochemical Design Background Experience Rotating equipment / mechanical maintenance technician / Commissioning technician Structural Designer diploma in mech.eng, NVQ-level -3 Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work. Suitable to work in process/operation area as technician (field & panel op) supintendent, etc. Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment. Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry, Over 24 years global experience in reservoir development and management of oil and gas condensate fields. Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East. Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline) QA/QC ENGINEER 20 years of experience in the field of computer s/w and h/w Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management. Technical / Lead Safety Engineer NDT inspector LVL II 11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM. Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA. Process Engineer Resume Oil and gas Piping Field Engineer – Technical Office 14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills civil/structural engineer/manager 19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access. I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession. Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm. SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills. More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell). Business Analyst Technical Writer Project Manager Programme Director Take advantage of 30 years corporate experience. I can train your junior staff to become very proficient with Paradigm's GEOLOG 6 software. My specialty is reservoir characterization, with emphasis on probabilistic log interpretation using GEOLOG's Multimin program. Worldwide contracts considered. Electrical, Control Systems and Instrumentation Engineer: great international experience designing, installing, testing, calibrating, starting up, commissioning, maintaining and repairing industrial electrical, instrumentation and control systems, in the natural gas and others industries. Senior Engineer with Masters in Business Administration and possessing over twenty-two years of experience in Electrical/Instrument Maintenance and Project works in refining and petrochemical industries. SAS and COBOL Programmer with DB2 and SQL experience OBJECTIVE Seeking a challenging position at senior management level in R&D and Manufacturing / Technical Services / Applications Development / Technology Strategy Planning./Project Implementation Offering MBA Leadership, insightful, analytical, and creative engineering leader successful in conceptualizing and implementing cost-effective solutions and leveraging key advantages in complex environments. Resourceful team builder and project manager adept at building and leading teams. Over 20 years of Oil and Gas experience using/supporting technical applications for oil companies & vendors (Landmark, Geoquest, and Paradigm). The past 8 years, my focus is on project management, building/leading application support team, workflows, database, data management and GIS solutions. PDMS Desgn,Draft, Isodraft and Catalogue Creation and MDS supports ELCTRICAL ENGINEERE Level 4 scheduling in oil&gas with Primavera First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   [ 16 ]   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Change search parameters... CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com