Resume - MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled...

Misco Jobs

Resume #77244

CONTACT INFORMATION:
View contact information...

RESERVOIR ENGINEER

Date of Birth: 1st March, 1960
Nationality: Indian
Marital Status: Married with two children
______________________________________________________________________________________
AREAS OF SPECIALIZATION

Reservoir Simulation and Forecast
Reservoir Studies and Monitoring
Integrated Production Modelling
Transient Well Test Interpretation
Well Performance Analysis
Decline Analysis
Experienced in Evaluation of Exploration/Production Blocks for Equity Participation
Experienced in Preparation of Technical Tenders drawing Relevant Scope of Work
Self-starter and Effective Team Worker.
Experienced in VAX, UNIX Workstation Environments and PC with variety of Petroleum Engineering Software
______________________________________________________________________________________
PROFESSIONAL EXPERIENCE

PETROLEUM DEVELOPMENT OMAN, MUSCAT,OMAN
RESERVOIR ENGINEER, YIBAL ASSET TEAM
January 2007 - Current

Joined Yibal asset team in the Planning & Development Division. During 2007, the responsibility was to deliver an alternative simulation model for the whole Yibal field, which is a complex carbonate reservoir with mature water-flood and having a spaghetti of long horizontal wells. The RF of the field is 52% till date and the challenge is to further increase it to about 60%. Worked in Task Force to deliver the Full-field simulation model (MoRes) and some mechanistic models to capture coning phenomena in Petrotel's Flowstream software (streamline visualization). Currently responsible for developing a new Integrated Production Model (IPM) for the Yibal field considering futuristic re-development options such as reduction of over-injection and rehabilitating the field by some regular 5-spot patterns. This option considers shutting-in of the old horizontal wells and developing regular patterns by vertical wells. The idea is to minimize coning and recover as much as attic oil possible. Competent with Petex suite of software e.g. MBAL, PROSPER and GAP which are being used for modeling and integrating the sub-surface and surface facilities to identify possible bottle-necks in the surface network. This work will lead to designing/procuring of new surface facilities required for rehabilitating the old Yibal Field.

PETROLEUM DEVELOPMENT OMAN, MUSCAT,OMAN
RESERVOIR ENGINEER, FAHUD STUDIES TEAM
January 2005 - December 2006

Studies Reservoir Engineer for one of the biggest oil-fields in North Oman (Carbonate Reservoir). Co-ordinator between WRM & Studies Center for Water Flood Pilot Project including planning for data acquisition for the Pilots. Monitoring of Pilots. Responsible for undertaking simulation studies for Pilots. Recommended shutting-off of high permeability streaks in one of the Pilot Areas on the basis of modeling. Responsible for carrying out 2005 Full Field forecast for Fahud Field extrapolated from Sector Modeling. Skilled in full field PetroVR Forecast generation by extrapolating Sector Forecast by means of Type Curves. Change over of contract from PDO Eastern Direct Hire (EDH) Group to Shell Group with effect from 1st November, 2005. Completed Fahud Natih-D reservoir studies for concept selection between GOGD and Water-flood by end of the year 2006. Responsibility included sector modeling, sensitivity studies and uncertainty analyses.

PETROLEUM DEVELOPMENT OMAN, MUSCAT,OMAN
RESERVOIR ENGINEER, MARMUL STUDIES TEAM
January 2003 - December 2004

Joined PDO in Eastern Direct Hire (EDH) Group. Studies Reservoir Engineer with an integrated team in the recently established Study Centre at Petroleum Development Oman (PDO). Worked on a water-flood Project of a major oil-field of South Oman (Clastic reservoir). Completed sector modeling (History Match & Prediction)of two major sectors of the field with MoRes simulator. Actively associated with Shell geoscientists and engineers of Well & Reservoir Management Group for generating well locations for the 2004 drilling campaign. Participated in Water-flood VAR2 session of the field in March 2004 and VAR3 session in December 2004. Contributed to full field modeling and writing the Field Development Plan (FDP). Involved in work-association studies with SEPTAR-Aberdeen. Co-authored the simulation report for the field along with other colleagues.

OIL INDIA LIMITED, DULIAJAN, ASSAM, INDIA
DEPUTY CHIEF ENGINEER (RESERVOIR)
July 1999 - December 2002

Overseeing reservoir simulation jobs and monitoring of reservoirs in terms of planning and acquiring BHPs, Transient Well Tests, PVT and Petrophysical data. Well performance analysis for problematic wells, work-over monitoring and designing of work-over programs. Prepared Technical Tenders for a number of Consultancy Studies and evaluated the parties¡¯ proposals to shortlist the suitable bidders. Evaluated Exploration/Production Blocks of different countries to assess suitability of equity participation/ production sharing. Geological & Reservoir Study of rehabilitation of Digboi oil-field (Discovered in the Year 1889 ¨C one of the oldest oil-fields of the World) for EOR. Three locations were released for data-gathering and recording modern suite of logs.

OIL INDIA LIMITED, DULIAJAN, ASSAM, INDIA
SUPERINTENDING ENGINEER (RESERVOIR)
January 1994 - June 1999

Handling of Oil India's contract on feasibility of horizontal/drainhole drilling in Assam - screening of reservoirs for the Consultant, final report evaluation and recommendations to the management. Screening of shut-in wells on reservoir and well considerations to identify candidates for short-radius drainhole drilling by Oil India by window cutting method. Responsible for carrying out reservoir simulation studies in the developed, developing and the depleted reservoirs to identify optimum development schemes. Monitoring and analyzing reservoir performance to produce reservoir management plans aimed at producing wells at optimal recovery (monitoring of pressure maintenance, GOR control, water cut monitoring etc.)

OIL INDIA LIMITED, DULIAJAN, ASSAM, INDIA
SENIOR ENGINEER (RESERVOIR)
November 1986 - December 1993

Responsible for designing/supervising gas well testing programs in Rajasthan Project of Oil India Limited. Evaluation of open-flow potential of the wells and recommending future work-over programs based on degree of formation damage around the well-bores. Evaluation of wells completed with bottom-hole heaters and recommending effective ways of sustaining production from the wells producing highly waxy crude. Detailed evaluation of some depleted reservoirs for suitability of polymer flooding for augmenting oil recovery. Carried out well test interpretation to evaluate reservoir parameters and validate geological models of the reservoirs. Carried out in-house reservoir simulation studies with the then existing McCord 3D-3P Black Oil Simulator. Carried out hydrocarbon reserves estimation and appraisal based on yearly exploratory drilling and revision of gross ultimate recovery, recovery factors etc. of the reservoirs based on pressure-production behavior. Involved in work-over jobs relating to selection of candidate wells for production logging, attending well-site PLT jobs, interpretation of production logs.

UNIVERSITY OF OKLAHOMA, NORMAN, OKLAHOMA, U.S.A.
GRADUATE STUDENT IN PETROLEUM ENGINEERING
January 1984 - August 1986

OIL INDIA LIMITED, DULIAJAN, ASSAM, INDIA
EXECUTIVE TRAINEE (RESERVOIR)
March 1983 - December 1983

Reporting to the supervisor for any reservoir engineering related jobs such as data deck preparation for carrying out reservoir simulation studies, production data-bank updation etc.

OIL AND NATURAL GAS COMMISSION, AGARTALA, TRIPURA, INDIA
DRILLER (DRILLING)
September 1982 - February 1983

Reported to the Senior Driller (Drilling) for job assignment. Worked at the drill-site as well as in the Technical Cell of the Department.

______________________________________________________________________________________
OTHER KEY ROLES

- Sectional Head of Reservoir Engineering Department ¨C Supervised 10 other Reservoir Engineers. Supervised another 05 RE Technical Assistants (India).
- Chalked out yearly training programme requirement (in-house/abroad) for REs (India).
- Chalked out field-duties/field training programmes for the new REs (India).
- Imparted RE Training programme within the Company for non Reservoir Engineers (India).
- Was responsible for staff establishment in RE discipline. Conducted written and viva-voce tests for the REs in conjunction with HR Department (India).
- Acted as recruitment member for Oil India Ltd (India).
- Acted as interdisciplinary Task-Force member in different interdisciplinary Projects. RE Consultancy Tenders/Contracts etc (India).
- Served as a delegate deputed by GOI to Venezuela for negotiation with PDVSA for Oil India¡¯s Heavy Crude Project in Rajasthan (India).
- Procurement of RE software, hardware, handling of Annual Maintenance Contracts (India).
- Supervising Young Omani Engineers for Reservoir Simulation jobs, Material Balance Studies, IPM Modelling (Oman).
- HSE Focal Point for 1 year. Periodic visitor to Fields as STOP Supervisor to ensure adherence to PDO safety rules and regulations (Oman).
__________________________________________________________________________________________
PE/RE SOFTWARE WITH HANDS-ON EXPERIENCE

- McCord 3D-3P Simulator (USA)- One of the simulators in early 80s with traditional card-reader - run on IBM/Megaseis Computer. One of the earliest Polymer-flood Pilots was implemented in Oil India Ltd based on the simulation study in McCord Model.
- Scientific-Software Intercomp's (SSI) SIMEASE & SIMBEST ( Black oil simulator), INTERPRET-2 (Transient Well Testing), WPM (Well Productivity Modelling), LOGCALC-II (for log interpretation & correlations), EOR for analytical studies of EOR/IOR - run on VAX/VMS System
- Baker-Hughes' PETROLEUM WORKBENCH offering 3D-3P Black oil simulator and well-log characterisations - PC Based
- DYNAMO/MoRes reservoir simulator
- PAN System for Well Test Interpretation
- PetroVR ¨C as forecasting tool.
- FlowStream ¨C Streamline simulator with fluid flow visualization.
- MBAL/PROSPER/GAP ¨C Petex suite of software.
- OFM

EDUCATION

M.S. Petroleum Engineering, University of Oklahoma, Norman, Oklahoma, USA. (1986)
B.Tech. Petroleum Engineering, Indian School of Mines, Dhanbad, India (1982)

LANGUAGES

English, Hindi

PUBLICATIONS/PRESENTATIONS

- Recovery of Additional Oil from Depleted Reservoirs by Steam Injection ¨C MS Thesis. Based on Myhill-Stegmeier's ¡Descending Steam Chest Model¡¯, an analytical FORTRAN programme was developed to predict light oil recovery from the post water-flooded giant oil fields of Oklahoma. Economic analysis followed to rank different fields, 1986.
- Participated in Technical Paper Presentation at Oklahoma Academy of Science, Shawnee,OK, USA, 1986.
- Participated in SPE's Rocky Mountain Regional Students¡¯ Paper Contest, Socorro, NM, USA, 1986.
- Paper SPE 64447 ¡° Integration of Well Test Analysis helps in Reservoir Simulation, APOGCE 2000, Brisbane, Australia.
- Paper SPE 80441 "Reliable and Cost Effective Reservoir Characterization of Thin, Layered and Heterogeneous Reservoirs: Case Studies", APOGCE 2003, Jakarta, Indonesia
- Paper SPE 80539 "Resolving Development Strategy by Integrating Geophysical, Geological and Pressure Transient Test Data: A Case Study of Heterogeneous Lower Eocene Sand of Upper Assam Basin, India", APOGCE 2003, Jakarta, Indonesia
- Four (4) Numbers of Technical Papers presented at different National Seminars in India.
- Development of Pseudo Relative Permeability Curves Based on Field Data for Mature Water-flood Projects¡±: Shell/PDO Regional Reservoir Engineering Conference, Muscat, 2007.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 7039)

Go to Search Parameters...

Brief Description

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Well-developed interpersonal skills.

Senior Process and flow assurance engineer with full project cycle experience.

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5

I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model

Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..

Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway

Drilling exploration production, per cv below

B.E. (Mechanical) - 1980

Petroleum Engineer with 26 years of professional experience mostly in Production Engineering. Spanish and English fluent speaker. Artificial lift, workover and well service recommendations. Well Completion programs. Well testing. Field Evaluation and Production Optimization.

30 + year mud engineer, experienced in all phases of drilling fluids & BOP.

I have more than 17 years experience in exploration and development domains. During my career, I have explored for hydrocarbon in the Algeria sedimentary basins. North Sea Norwegian sector, Libya and now I`m working in Canada for Fugro-jason.

23 YEARS EXPERIENCE IN PETROCHEMICALS -PROJECT , OPERATIONS ,ERECTION ,COMMISSIONING

Seasoned and versatile process engineer (Oil & Gas, Refining) seeking a Process Engineering position that utilizes my analytical and communication skills to enhance organizational growth and profitability.

Project management, Coordination with End User/ Vendors/Contractors/Consultants, Progress monitoring& reporting, Supervision, Quality/Safety assurance and Tender documents

Professional API 510 and AWS CWI Inspector

With thirty years experience in the workforce in industries such as oil & gas, mining, fabrication/construction, and marine engineering, I have a very strong mechanical aptitude in all disciplines and a strong commitment for OHSE having started with my apprenticeship as a Mechanical fitter/1st class

Petrophysicist

Over 15 years of experience in Instrumentation Engineering, Procurement, Construction, pre-Commissioning and commissioning of projects

Highly skilled and experienced Sr. Drilling Engineer, experience with land/offshore (including deepwater), having worked as Drlg Engineer through Drilling Engineering Supervisor for a large scale GoM deepwater developement project.

20 years experience in drilling/work

Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP

Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering

B.E.(Mechanical); 22 Years total Industry Experience; Served with SABIC, Reliance, SPIC & Shell;

More than twenty (20) years experience in the field of Engineering Construction in

A professional, well-qualified MECHANICAL ENGINEER with extensive project management experience in the oil refining, gas, LNG/LPG, petrochemical and associated industries.

Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years of experience in Oil/ Petrochemical industries loking after Process Plant Inspection, Materials Inspection, NDT, Corrosion, Failure Analysis, Fabrication/ Welding inspection in running plants + new grass root projects.

Geologist, Heavy Oil and Oilsands. Experienced consultant, prospect generator, horizontal well planner for thermal and CHOPS applications.

I have 22 Years of experience in the Detailed Design and Engineering in the areas of Plant Design & Piping for Oil & Gas, Petrochemical, Chemical and Power Projects. I am presently working as a Head Piping.

With 20years O&G experience, my main experience has been on major projects during design. I have experience within Operations, Construction and Commissioning and also worked on site; offshore, pipeline construction and FPSO shipyard construction. I have Australian and British Citizenship.

Dedicated professional in Exploration and Production with 27 years experience working for the two largest major Oil Services Companies. Strong engineering background in Drilling and Completion Fluids as well as Drilling Waste Management through years of focused operational management.. Strong engi

Drafter & Designer experience in estimation and designing of transmission lines and poles. Facilitated department meetings for administration of projects. Have worked the industry for twenty-five years and have obtained a Bachelors of Science degree in, Business Administration. Ability to prioritize

Profile: A Specialist Seismic Interpreter with over 15 years experience in Oil & Gas exploration, in seismic interpretation and prospect generation. Having the ability to supervise seismic processing and acquisition activities and take on role as a Project Manager. Confident in ability to cont

Working with Transocean as a Drilling Manager in Integrated services Project started for 5 Jack up rig for Bombay High field with client -ONGC. Operation commence in Jan 2007.

Drilling Engineer offshore tender rigs jackups onshore land rigs

process engineer

a senior instrument & Controls engineer

Sr Piping Designer Oil & Gas 3D model

Senior Planner with more than 20 years experience in Oil & Petrocehmical Industries

Qualified professional Project Manager and licensed US chemical engineer, with 32 years oil and gas and refined products production and processing facilities, pipelines, stations and terminals.

Piping Engineer/Designer

Presently working as Drilling Manager with Transocean started up the project in India for 5 Jackup rig for ONGC along with Tony Flynn who was than our GM -Integrated services in May 2006. Direct responsibility is managing T12 and JTA ( 300' Jackup)on day to day coordination, planning and execution

AutoCAD drafting, Drawing, Painting (Acrylic, Oil, Water Color), Airbrushing, Faux Finishing, Murals, and Computer Graphics /Illustrations. Software: Adobe Illustrator, Adobe Photoshop, Adobe Streamline, Adobe 3D, Flash, Fractal Painter, Quark Xpress, Microsoft Word, Power Point and various scanning

Instrumentation, Control and Safety Systems Design Engineering - Projects

A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control System

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out